Table of Contents
Advertisement
Quick Links
Wired Controller
User Manual
WARNING
!
• This system should be installed by a qualified HVAC
professional. Incorrect installation may cause fire, water
damage, personal injury or death.
• When abnormalities such as a burnt smell are detected,
immediately power off the main switch and contact a
licensed contractor.
• Do not obstruct or cover ventilation grill on the air con-
ditioner. Do not put fingers/objects into inlet, outlet or
swing louver
• Do not allow children to play on or near the outdoor
system equipment
Wired Control Panel functions .................. 2
Features and Interface ....................................2
Installation .............................................3-4
Wired Controller Wiring Instructions .........3-4
Dip Switch ........................................................4
operation ..............................................5-8
Settings & Functions ...................................5-8
WIRED CONTROLLER
Ductless split air Conditioner
Indoor Unit
aD07sl2VH
1
aD09sl2VH
1
aD12sl2VH
1
aD18sl2VH
1
ab09sC2VH
2
ab12sC2VH
2
ab18sC2VH
2
aW09es2VH
3
aW12es2VH
3
aW18es2VH
3
aW24es2VH
3
ships with indoor unit
1
optional and compatible
2
optional, requires an accessory kit to be
3
compatible, model number WK-a
Table of ConTenTs
Page 1
Advertisement
Table of Contents
Summary of Contents for Haier AD07SL2VH1
-
Page 1: Table Of Contents
Ductless split air Conditioner Wired Controller Indoor Unit User Manual aD07sl2VH aD09sl2VH aD12sl2VH aD18sl2VH ab09sC2VH ab12sC2VH ab18sC2VH aW09es2VH aW12es2VH aW18es2VH aW24es2VH ships with indoor unit optional and compatible optional, requires an accessory kit to be compatible, model number WK-a WARNING Table of ConTenTs • This system should be installed by a qualified HVAC Wired Control Panel functions .... -
Page 2: Wired Control Panel Functions
Wired Controller Yr-e17 WIreD ConTrol Panel fUnCTIons features and Interface Clock; Parameter setting/Inquiry; Malfunction display Timer ON/OFF; Sleep function; Parameter setting/Inquiry; Malfunction display ROOM/SET temp. and humidity display, each step is 0.5°C (1°F). For example, if the temp is 25°C (77°F), it will display 25.°C (77°F). Humidity display function is reserved. Energy Saving function. This icon will be dis- played only when energy saving function is set. Filter Cleaning Child Lock Lock/Central Motion Sensing (Reserved) Left/Right Swing. This icon is displayed only when in swing function Up/Down Swing. This icon is displayed only when... -
Page 3: Installation
InsTallaTIon Wired Controller Wiring Instructions step by step Guide To slim Duct Unit Installation There are three methods to connect the wired controller to the indoor units. A. One wired controller controls one indoor unit; the indoor unit connects with the wired controller through a 3 conductor shielded cable. B. One wired controller can control up to 16 sets of indoor units (max); A 3 conductor shielded cable must connect 1. -
Page 4: Dip Switch
InsTallaTIon Wired Controller Wiring Instructions Dimensions Unit: inch (mm) Dip switch Dip switch on/off function Default setting Set as the slave controller SW1-1 Set as the master controller Ambient temp. display available SW1-2 Ambient temp. display unavailable Display ambient temp. from PCB of indoor SW1-3 Display ambient Temp. from wired controller Auto-restart invalid SW1-4 Auto-restart valid... -
Page 5: Operation
oPeraTIon settings & functions switching between fahrenheit & Celsius Initialization To switch from Celsius to Fahrenheit, select the mode you The wired controller will wish to operate (COOL, HEAT, DRY, INTELLIGENT/AUTO). momentarily display Press and hold the p key to reach 30 °C then continue holding all display icons upon the p key for 15 seconds until the display reads 86 °F. Use the powering up or when pq keys to adjust to desired temperature. - Page 6 oPeraTIon settings & functions Timer function setting eCo energy saving function noTe: This function requires the on/off key leD to be noTe: The display backlight must be illumi- turned on and the screen backlight to be illuminated. nated before proceeding. To turn the back- light on, press any key (MoDe, fan, pq, Press the SET key. The swing louver function icon will TIMe, or seT) located at the bottom of the...
- Page 7 oPeraTIon settings & functions left/right/Up/Down swing forced Cooling/Heating note: This function requires the on/off key leD to be The swing function deter- turned off and the screen backlight to be illuminated. mines air circulation. forced Cooling 1. Press SET key to access When the system is turned off in cooling mode, press and hold Swing function circulation. the ON/OFF key for 10 seconds. The system will enter forced 2.
- Page 8 oPeraTIon settings & functions sleep function other functions note: These functions require the on/off key leD to be noTe: This function requires the on/off key leD to be turned off and the screen backlight to be illuminated. turned on and the screen backlight to be illuminated. Press the SET key. The swing louver function icon auto restart will be displayed.
- Page 9 Haier America, Model #: YR-E17 Wayne, NJ 07470 Issued Date: May 2015 ©2015 Haier America Trading, LLC.
Need help?
Do you have a question about the AD07SL2VH1 and is the answer not in the manual?
Questions and answers