Advertisement
Advertisement
Table of Contents
Related Manuals for Hitachi KP-F37
Summary of Contents for Hitachi KP-F37
- Page 1 KP-F37/F38 Progressive Scan B/W CCD Camera Operation Guide...
-
Page 2: Table Of Contents
Table of Contents ･･･････････････････････････････････････････････ General ･･･････････････････････････････････････････ Composition ･･････････････････････････････････････････ Specifications ････････････････････････････････････････････ Adjustment ･･･････････････････････････････････････････ Timing chart ･･････････････････････････････････････････ External view ･･････････････････････････････････････････ External sync ････････････････････････････････････････ Connect cables ･････････････････････････････････････････ Optical system ･･･････････････････････････････････････････････ 10. Optional ･････････････････････････････････････････ 11. Notes to users ････････････ Attachment ： Spectral sensitivity characteristic KP-F37/F38... -
Page 3: General
1. General The Hitachi KP-F37/F38 are a high performance self-contained black and white CCD camera suited for a wide variety of general purpose and specialized applications. The charge coupled device (CCD) imaging element is 1/3-inch size progressive scanning with independent readout of all picture elements (pixels). - Page 4 500(H)×485(V) TV lines 10) Signal to noise ratio 50 dB 11) Electronic shutter External switch settings for off (standard exposure), KP-F37: 1/58000s to 1/290s KP-F38: 1/66000s to 1/330s Factory setting is off. 12) Gamma correction 13) Gain control Manual gain control.
-
Page 5: Adjustment
(1/1300s) (1/66000s) FRAME ON DEMAND RESET TRIGGER CONTROL MODE FIXED PARTIAL SHUTTER SCAN TRIGGER TRIGGER (OPTION) HD/VD IN/OUT TERMINATION HIGH 75ohm IN ..External HD/VD Input INPUT IMPEDANCE OUT.. Internal HD/VD Output EXTERNAL HD AND EXTERNAL VD GAIN control KP-F37/F38... - Page 6 VIDEO1 Vout Vout Vout Vout Vout Vout GND(HD) GND(HD) GND(HD) GND(HD) GND(HD) (GND) HD IN/OUT HD IN/OUT HD IN/OUT HD IN/OUT (HD IN/OUT) VD IN/OUT Trigger Trigger Trigger/VD Trigger (GND) VIDEO2 Trigger B GND(VD) GND(Trig) GND(Trig) GND(Trig) GND(Trig) (GND) KP-F37/F38...
-
Page 7: Timing Chart
5 Timing chart KP-F37/F38... - Page 8 5 Timing chart KP-F37/F38...
- Page 9 5 Timing chart KP-F37/F38...
- Page 10 5 Timing chart KP-F37/F38 Frame on demand function ONE Trigger High: 5V 2us or more. Trigger pulse Low: 0V Integration time 2us approx. 2us approx. Video output V.SYNC Trigger pulse ..Asynchronous Fixed Shutter High: 5V Trigger pulse Integration time Low: 0V (Shutter switch) 2us approx.
- Page 11 (The image is output by inputting the Trigger at the VD cycle for this period.) It returns to the Trigger mode if Trigger B signal becomes Low. However, after becoming Low Trigger B, the period of 50ms becomes a Trigger signal input prohibition period. KP-F37/F38...
-
Page 12: External View
6 External view Dimensions KP-F37/F38... -
Page 13: External Sync
7. External sync Horizontal and vertical drive signal inputs f(H) = 36.713 kHz ±1 % KP-F37: HD f(V) = 69.93 Hz f(H) = 41.958 kHz ±1 % KP-F38: HD f(V) = 79.92 Hz Input level 4 to 6 V negative... -
Page 14: Connect Cables
8. Connect cables Connection of options KP-F37/F38... -
Page 15: Optical System
IR cut filter IRC650 Dimensions: 14 x 12 x 1.0t Part code: XMD0006 * The flange focal point shortens by about 0.3mm when IR cutting filter is removed. We will recommend the dummy glass of the optional to be installed. KP-F37/F38... -
Page 16: Optional
10. Optional 1)Tripod adaptor TA-F30 (23885AX) 2)12-pin plug HR10A-10P-12S(01) Product code: 23810AX Viewed from this side KP-F37/F38... - Page 17 (23862AX) (23857AX) (23873AX) C-102KSM C-102KS C-102KSS (23863AX) (23858AX) (23874AX) Specify assembly or shielded type at time of order. (): Product code We will recommend the camera cable of the shield type when using it in the sphere of CE. KP-F37/F38...
- Page 18 Attenuation at 4MHz Attenuation at 7MHz Attenuation at 12MHz length 50dB/Km 70dB/Km 90dB/Km 0.05 0.07 0.09 Attenuation due 0.14 0.18 to cable length(dB) 0.25 0.35 0.45 The video bandwidth obtained by the KP-F37/F38 is up to approximately 12.5 MHz. KP-F37/F38...
-
Page 19: Notes To Users
The camera can be damaged by static electricity. Use ample care when installing and arranging. Auto electric shutter In regions using 50 Hz power line frequency , flicker can appear on the monitor screen from light sources such as fluorescent or mercury. In such cases , release the auto electronic shutter. KP-F37/F38... - Page 20 Moire When fine patterns are shot , moire may be displayed. The CE mark is required when exporting to Europe. Obtain the necessary authorization for the customer’s system. Enclose the camera in a shielded case and use shielded cable. KP-F37/F38...
-
Page 21: Attachment ： Spectral Sensitivity Characteristic
Spectral sensitivity (typical example) KP-F37/F38... - Page 22 Hitachi Kokusai Electric is not liable for the losses caused when the equipment is used in a system used for business trades, production process, medical fields, crime prevention applications, etc.
Need help?
Do you have a question about the KP-F37 and is the answer not in the manual?
Questions and answers