hit counter script
Philips 220SW8FB1/69 Service Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Monitor
  5. 220SW8FB1/69
  6. Service manual

Philips 220SW8FB1/69 Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

22 inch TFT WXGA LCD Colour Monitor
Description
Important Safety Notice-------------------------------------2
Technical Data--------------------------------------------- 3~4
Installation------------------------------------------------------5
T roubleshooting-----------------------------------------------6
On Screen Display-----------------------------------------7~8
Lock/unlock, Aging,Factory mode-------------------------9
Mechanical Instructions -----------------------------11~12
Color adjustment -------------------------------------------13
Electrical instruction ---------------------------------16~17
DDC Instructions & Serial Number ----------------18~24
DDC DATA ----------------------------------------------25~26
ANY PERSON
ATTEMPTING
AND BE AWARE OF THE NECESSAR
EQUIPMENT
CONT AINING HIGH VOL TAGES.
CAUTION: USE A SEP ARA TE ISOLA TION TRANSFORMER
REFER
T O BACK COVER FOR IMPOR TANT SAFETY GUIDELINES
Published by Philips CE Copyright reserved Subject to modification
220SW8FB1/69
220SW8FB1/00
220SW8FB1/27
220SW8FB1/75
220SW8FB1/93
220SW8FS1/00

TABLE OF CONTENTS

Page
---------------------------------10
------------------------27~28
SAFETY NOTICE
T O SER VICE THIS CHASSIS
Y SAFETY PRECAUTIONS
Chassis: HUDSON 8
Description
Wiring Diagram--------------------------------------------30
Block Diagram----------------------------------------------31
Scaler Diagram & C.B.A. ----------------------------32~38
Power Diagram & C.B.A. ---------------------------39~42
Control Diagram & C.B.A. ---------------------------43~44
General product specification----------------------45~72
Exploded V iew ---------------------------------------------73
Spare/
Recommended P
PCBA photos------------------------------------------------75
Repair tips----------------------------------------------76~77
Repair Flow chart-------------------------------------78~80
Safety Test Requirments---------------------------------81
MUST F AMILIARIZE HIMSELF WITH THE CHASSIS
T O BE USED WHEN SER VICING ELECTRONIC
FOR THIS UNIT WHEN SER VICING.
Jan. 7, 2008
Horizontal frequencies
30 - 8 3 kHz
Page
-
----------------------------------29
arts List----------------------74
GB
312278517720

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 220SW8FB1/69 and is the answer not in the manual?

Questions and answers

Related Manuals for Philips 220SW8FB1/69

Summary of Contents for Philips 220SW8FB1/69

  • Page 1: Table Of Contents

    CONT AINING HIGH VOL TAGES. CAUTION: USE A SEP ARA TE ISOLA TION TRANSFORMER FOR THIS UNIT WHEN SER VICING. REFER T O BACK COVER FOR IMPOR TANT SAFETY GUIDELINES Published by Philips CE Copyright reserved Subject to modification Jan. 7, 2008 312278517720...

  • Page 2: Important Safety Notice

    * * Hereaf ter throughout this m anual, Philips Consumer El ectronics Co mpany w ill be referred t o a s Philips . * * Take care during handling the LCD module with backlight...

  • Page 3: Technical Data

    Technical Data 220SW8 LCD LPL panel ８ １ Type NR. : LPL LM220WE1-TLD1 １６ ９ Outside dimensions : 493.7(H) x 320.1 (V) x 16.5(D) mm (Typ.) ２４ １７ Pitch ( mm ) : 0.282(per one triad) × 0.282 Color pixel arrangement : RGB vertical stripes Display surface : Anti-glare type, Harness 3H...

  • Page 4: Technical Data

    Technical Data 220SW8 LCD CMO panel ８ １ Type NR. : CMO M220Z1-L03 １６ ９ Outside dimensions : 493.7(H) x 320.1 (V) x 16.5(D) mm (Typ.) ２４ １７ Pitch ( mm ) : 0.282(per one triad) × 0.282 Color pixel arrangement : RGB vertical stripes Display surface : Anti-glare type, Harness 3H...

  • Page 5: Installation

    To switch monitor's power On and Off Connect the power cord to the back of the monitor firmly. To access OSD menu (Philips has pre-connected VGA cable for the first installation. ) To adjust the OSD menu To adjust brightness of the display Input To change the signal input source.

  • Page 6: Troubleshooting

    Troubleshooting 220SW8 LCD This page deals with problems that can be corrected by a user . If the problem still persists after you have tried thesesolutions, contact Philips customer service representative. Common Problems Having this problem Check these items No Picture 1.Make sure the power cord is plugged into the power outlet and into the back of the...

  • Page 7: On Screen Display

    Description of the On Screen Display What is the On-Screen Display? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.

  • Page 8: On Screen Display

    On Screen Display 220SW8 LCD The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. Resolution notification This monitor is designed for optimal performance at its native resolution, 1680X1050@60Hz.

  • Page 9: Lock/Unlock,Aging,Factory Mode

    Lock/Unlock,Aging,Factory Mode 220SW8 LCD Access Aging Mode To Lock/Unlock OSD FUNCTION(User Mode) The OSD function can be locked by pressing"OK"button(1) for more Step 1 : Access Factory Mode then enter Factory Menu. than 10 seconds, the screen shows following windows for 4 seconds. Step 2 : By pressing "...

  • Page 10: Philips Pixel Defect Policy

    LCD panel must exceed these acceptable levels. For example, no more than 0.0004% of period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects the sub pixels on a 19" XGA monitor may be defective. Furthermore, Philips sets even exceeding the tolerances listed in the following tables.

  • Page 11: Mechanical Instructions

    Mechanical Instruction 220SW8 LCD Front View: Fig.1 Fig.5 Back View: Fig.6 3. Remove the AL-tapes, acetate tapes, lamp wire and Cables for Key-board Fig.2 a. Remove the 4 AL-tapes as shown in Fig.7 1. Remove the base. b. Remove the acetate tape and lamp wire as shown in Fig.8 a.

  • Page 12: Mechanical Instructions

    Mechanical Instruction 220SW8 LCD Fig.9 4. Remove the 2 shielding covers a. Unscrew the screws, and then remove as shown in Fig.10, 11, 12 Fig.14 Fig.10 Fig.11 Fig.15 b. Remove the top shielding cover as Fig.13 Fig.13 5. Remove the Power board and IF board a.

  • Page 13: Color Adjustment

    Color Adjustment 220SW8 LCD Clear image Clear image Alignment procedure 1. Turn on the LCD monitor . 2.T urn on the Timing/pattern generator. See Fig.1 3. Preset LCD color Analyzer CA-1 10 -Remove the lens protective cover of probe CA-A30. -Set measuring/viewing selector to measuring position for reset Measurement/viewing selector Measurement/viewing selector...

  • Page 14: F Aqs (Frequently Asked Questions)

    Yes. Philips LCD monitors have this optional feature. For standard VESA mount holes on the rear cover allows the user to mount the Philips monitor on most of the VESA standard How do I adjust the resolution? arms or accessories. We recommend to contact your Philips sales representative for more Your video card/graphic driver and monitor together determine the available resolutions.

  • Page 15: F Aqs (Frequently Asked Questions)

    The passive matrix LCD has a grid of conductors with pixels located at each intersection in the Yes. Philips LCD monitors conform to the guidelines of MPR-II and TCO 99/03 grid.

  • Page 16: Electrical Instruction

    Electrical Instructions 220SW8 LCD 1 Elec trica l char acter istics 1.1 Int erfac e signa ls 1). D-Sub Analog Input signal : Video, Hsync., Vsync Video : 0.7 Vp-p, input impedance, 75 ohm @DC Sync. : Separate sync TTL level , input impedance 2.2k ohm terminate Hsync Positive/Negative Vsync Positive/Negative Composite sync TTL level, input impedance 2.2k ohm terminate(Positive/Negative)

  • Page 17: Electrical Instruction

    Electrical Instructions 220SW8 LCD 2. White color adjustment There are three factory preset white color 9300K, 6500K, sRGB. Apply full white pattern, with brightness in 100 % position and the contrast control at 50 % position. The 1931 CIE Chromaticity (color triangle) diagram (x,y) coordinate for the screen center should be: Production Product SPEC 5000K...

  • Page 18: Ddc Instructions

    DDC Instructions 220SW8 LCD DDC Data Re-programming In case the DDC data memory IC or main EEPROM which storage all factory settings were replaced due to a defect, the serial numbers have to be re-programmed "Analog DDC IC, Digital DDC IC & EEPROM". It is advised to re-soldered DDC IC and main EEPROM from the old board onto the new board if circuit board have been replaced, in this case the DDC data does not need to be re-programmed.
  • Page 19 DDC Instructions 220SW8 LCD 5. Connect and Mains cord to Monitor as shown in Fig.2. Fig.2 Fig. 2a...
  • Page 20 DDC Instructions 220SW8 LCD 6. Setup the Philips-IMS EDID Tools program Step 1: Make a folder in your PC as shown in Fig. 3. For example: C:\EDID Step 2: Copy PI-EDID Software into your folder as shown in Fig.3. Fig.3 Step 3: Copy the LCD_Analog.ddc and LCD_DVI.ddc...
  • Page 21 DDC Instructions 220SW8 LCD Update the DDC 1. Connect DSUB Cable to I2C Board. Double click the PI-EDID.exe icon in desktop then appears window as shown in Fig.5. Fig.5 2. Press File->OPEN EDID to Load DDC file as shown in Fig.6. Load Analog EDID file LCD_Analog.ddc to PI-EDID.exe Fig.6...
  • Page 22 DDC Instructions 220SW8 LCD 3. Load EDID file OK as shown in Fig.7. Fig.7 4. Modify Serial Number then Pre ss “Update S/N” button as shown in Fig.8. Fig.8 F ig.17...
  • Page 23 DDC Instructions 220SW8 LCD 5. Press EDID->Write to write EDID data to EEPROM as shown in Fig. 9. Fig.9 6. Connect DVI Cable to I2C Board. Repeat Step 1~5 to write DVI EDID file. 7. Enter Factory Mode then Press the Serial Number->Write EDIDS/N to EEPROM as shown in Fig.10 Note: If not enter Factory Mode, this Wrote EDID S/N will not work.

  • Page 24: Ddc Instructions & Serial Number

    220SW8 LCD DDC instruction 8. Press Monitor Menu Key to check OSD Serial number is the same as PI-EDID write data as shown in Fig.10 Note: If not the same, please rewrite EDID S/N again. Fig.14 9 Turn off the monitor, exit the factory mode. Serial Number Definition...

  • Page 25: Ddc Data

    Detailed Timing: 1680x1050 @59Hz EDID Revision#: Detailed Timing: FF (Monitor SN) 'DL30715000001' <-x-EDID Structure Version/Revision-x-> Detailed Timing: FC (Monitor name) 'Philips 220SW' Detailed Timing: FD (Monitor limits) <---Basic Display Parameters/Features---> Vert: 56 - 76 Hz Video i/p definition: Analog Horz: 30 - 83 KHz...

  • Page 26: Ddc Data

    1680x1050 @59Hz EDID Version#: Detailed Timing: FF (Monitor SN) 'DL30715000001' EDID Revision#: Detailed Timing: FC (Monitor name) 'Philips 220SW' <-x-EDID Structure Version/Revision-x-> Detailed Timing: FD (Monitor limits) Vert: 56 - 76 Hz <---Basic Display Parameters/Features---> Horz: 30 - 83 KHz...

  • Page 27: Firmware Upgrade For Cpu

    Firmware Upgrade for CPU 220SW8 LCD Update the firmware Configuration and procedure 1. Double click the Writer.exe then appears window as shown in Fig.5. "Novatek EasyWrite v4.0 Beta2" The software is provided by Novatek to upgrade the firmware of CPU. Novatek ISP Tools is for the interface between "Parallel Port of PC"...

  • Page 28: Firmware Upgrade For Cpu

    Firmware Upgrade for CPU 220SW8 LCD 6). Turn off the monitor, exit the factory mode. 6. Press AUTO running program , the firmware be updated as shown in Fig. 10. If there is a warring message coming as shown in Fig. 13. , check the AC power, Video cable, Parallel Port, Low CPU Speed or Novatek MCU.

  • Page 29: Failure Mode Of Panel

    Failure Mode Of Panel 220SW8 Quick reference for failure mode of LCD panel this page presents problems that could be made by LCD panel. It is not necessary to repair circuit board. Simply follow the mechanical Polarizer has bubbles instruction on this manual to eliminate failure by replace LCD panel. Phenomenon Failure description Vertical block defect...

  • Page 30: Wiring Diagram

    220SW8 LCD Wiring Diagram CN801 CN802 CN701 CN803 CN804 Power BD I/F BD Control BD...

  • Page 31: Block Diagram

    220SW8 LCD Blo ck Dia gram ＰＨＩＬＰＳ ２２０ＳＷ８ 　　 ＭＡＩＮ　ＢＯＡＲＤ　　 ＢＬＯＣＫ　ＤＩＡＧＲＡＭ 　 　 ＬＣＤ－ＶＤＤ　 ＲＩＮ．ＧＩＮ．ＢＩＮ　ＨＳＹＮＣ．ＶＳＹＮＣ Ｄｕａｌ　ｃｈａｎｎｅｌ　 　 Ｐ ＡＮＥＬ　 Ｉｎｐｕｔ　Ｒ，Ｇ，Ｂ　 　 ｌｖｄｓ　ｓｉｎｇａｌ　 ＶＧＡ－ＳＣＬ　 Ｃｏｎｎｅｃｔｏｒ　 ＮＴ６８６６５ＨＭＦＧ ｗｉｔｈ　Ｉｎｔｅｒｎａｌ　 （ＤＳＵＢ　 ＭＣＵ／Ｆｌａｓｈ　Ｍｅｍｏｒｙ　 ＶＧＡ－ＳＤＡ　 ｃｏｎｎｅｃｔｏｒ）　 ＩＮＶＥＴＥＲ　ＣＩＲＣＵＩＴ　 ＭＯＳＦＥＴ　 ＡＰＭ２３０１Ａ　 ＤＤＣ　ＥＥＰＲＯＭ　 ＢＬ－ＰＷＭ　ｆｏｒ　 ２４Ｃ０２　 ｍａｘ　ｃｕｒｒｅｎｔ　 Ｄｉｇｉｔａｌ　ｓｉｎｇａｌ　 ＢＬ－ＢＲＩＧＨＴ　ｆｏｒ　 ｂａｃｋｌｉｇｈｔ　ａｄｊｕｓｔｍｅｎｔ 　ＤＶＩ－ＳＣＬ　...
  • Page 32 Scaler Diagram-1 220SW8 LCD +5V_ESD RAI- RAI+ 0.1U Z 0.1U Z 0.1U Z BAV99 BAV99 BAV99 GAI- VGA_SDA GAI+ BAI- H SI BAI+ 100M/33ohm RAI+ 56 J 0.047U 16V R I1 VGA_SCL D-sub 15 4.7P C * RAI- 100 J 0.047U 16V RI1- RI1-...
  • Page 33 220SW8 LCD Scaler Diagram-2 DVIPC5V +5V_ESD BAV70LT1G 1K J CVDD1V8 4.7K J 0.1U Z +5V_ESD 4.7K J 4.7K J 100 J DVI_SCL 100 J DVI_SDA RX0M 0.1U Z BAV99 RX0- AT24C02N-10SU-1.8 47P J 47P J RX0P 0.1U Z BAV99 RX0+ RX1M 0.1U Z BAV99...
  • Page 34 220SW8 LCD Scaler Diagram-3 +1.8V CVDD1V8 CVDD1V8 Z220 +1.8V ADC_VAA +3.3V DVDD Z220 DVDD ADC_VAA +3.3V VGA_3V3 CVDD1V8 VGA_3V3 Z220 Z220 P VCC 0.1U Z 0.1U Z 0.1U Z Z1000 47U 25V 0.1U K 0.1U K 10U 25V* 10U 25V* <Spec>...
  • Page 35 220SW8 LCD Scaler Diagram-4 TP14 TP15 INV_ADJ TP16 INV_ON/OFF MUTE TP17 VOL_ADJ TP18 TP19 Z220 TP20 +3.3V TP21 TP22 TP23 2K61185110 TP24 10U 25V 10U 25V TP25 0.1U K 0.1U K 0.1U K 0.1U K 0.1U K 0.1U K TP26 TP27 2KK2088009 +3.3V...
  • Page 36 220SW8 LCD Scaler Diagram-5 U9 spec. LCD_5V_POWER TP32 Vds=-30V, Vgs=+/-12V TP33 Id=-3.5A when ambient temp.=70 degre TP34 TP35 TP36 G(1) D(3) TP37 TP38 S(2) TCLK2P TP39 TCLK2M TP40 TP41 TP42 TP43 TP44 TP45 TP46 TP47 LCD_5V_POWER TP48 TCLK1P 4.7K J TP49 TCLK1M TP50...
  • Page 37 Scaler Board C.B.A.-1 220SW8 LCD...
  • Page 38 Scaler Board C.B.A.-2 220SW8 LCD...
  • Page 39 220SW8 LCD Power Diagram-1 L605 TR602 (OPEN) 45 OHM C701 1000P K V-INVERTER R607 C607 R608 C605 68K J 1000P K 330K 120U 450V T601 <Spec> ZD701 R715 BD601 100 J TR601 GSIB4A60-LF NTC 8OHM L602 D601 D701 R609 UF4007-LF YG862C15R 330K C702...

  • Page 40: Power Diagram

    Power Diagram-2 220SW8 LCD V-INVERTER INV_VDD FP801 C801 330U 35V R814 R815 TP801 CN801 BL_ON C827 RC1820 1 U Z 1206 1206 TP802 IC801 R824 R806 C814 2.7K +5VA C806 C810 5P D R846 2062204102 DRV1 PGND 2200P J 2200P J T801 1K J D805...
  • Page 41 Power Board C.B.A.-1 220SW8 LCD...
  • Page 42 Power Board C.B.A.-2 220SW8 LCD...
  • Page 43 240BW8 LCD Control Diagram LED301 SW301 2B40069431 R4 10K PW_SW R1 1K J LED301 R3 1K J KEY_ENTER R5 10K R2 1K J R6 10K SW302 2B40069431 2K61185107 GRN/YEL SW303 2B40069431 KEY_RIGHT SW304 2B40069431 KEY_LEFT SW301 SW302 SW303 SW306 2B40069431 KEY_EXIT SW304 SW306...
  • Page 44 Control Board C.B.A. 220SW8 LCD...

  • Page 45: General Product Specification

    . POWER MANAGEMENT CAPABILITY . SOG SUPPORT .Windows Vista Premium Logo Certification .HDCP support .SMART CONTROL & SMART MANAGEMENT REQUIREMENT .SMART Contrast .SMART Image .. FGA, FACTORY GAMMA Alignment . PHILIPS LOGO displayed while power on .WEEE REQUIREMENT .RoHS REQUIREMENT .TCO06 TCO03 REQUIREMENT...
  • Page 46 GENERAL PRODUCT SPECIFICATION(Continued) 220SW8 LCD CONTENTS FOREWORD ........................7 PRODUCT PROFILE..................... 7 EDID_ ........................7 HEADER LCD B ................... 7 ASED ON PANEL SPEC ..................8 CANNING FREQUENCIES : 0 °C - 40 °C..............8 MBIENT TEMPERATURE ELECTRICAL CHARACTERISTICS ................8 SCALAR SHOULD BE CAPABLE OF BELOW ITEMS.
  • Page 47 GENERAL PRODUCT SPECIFICATION(Continued) 220SW8 LCD ..................19 RIGHTNESS UNIFORMITY (S)................... 19 HECK ROSS TALK ................ 19 OLOR TEMPERATURE ADJUSTMENT MECHANICAL CHARACTERISTICS ................ 21 OTS ID ..... 21 OSMETIC ISDA WITH HILIPS FRONT BEZEL ....... 21 ECHANICAL DATA FILES FILES REQUIRED ....
  • Page 48 GENERAL PRODUCT SPECIFICATION(Continued) 220SW8 LCD ................25 ETWEEN AILURES QUALITY ASSURANCE REQUIREMENTS.............. 25 ....................25 CCEPTANCE TEST PHILIPS’ FLAT PANEL MONITORS PIXEL DEFECT POLICY ......26 REGULATORY COMPLIANCE ................30 10.1 W ..................30 ORLDWIDE EGULATORY 10.2 EMC R ..................... 30 EQUIREMENTS 10.3 R...

  • Page 49: Foreword

    30 minutes. PRODUCT PROFILE EDID_header 1 User visible strings on .inf file Philips 220SW (22inch LCD MONITOR 220SW8) 2 Manufacturer ID ( EDID data) 3 Product ID, "xxxx" 4 codes MSB(byte 12): 08 LSB (byte 11): 68...

  • Page 50: Scanning Frequencies

    Scalar should be capable of below items. 1) Scalar must support color engine for Image enhancement feature (SmartImage) 2) Scalar must have enough memory to support PerfecTune feature and Philips OSD 3) Scalar must support Dynamic Contrast Ratio (DCR), 3000:1 DCR preferred...

  • Page 51: Interface Signals

    GENERAL PRODUCT SPECIFICATION(Continued) 220SW8 LCD 4) Can be shared with 220BW9 and 220PW Interface signals 1). D-Sub Analog Input signal: Video, Hsync., Vsync Video: 0.7 Vp-p, input impedance, 75 ohm @DC Sync.: Separate sync TTL level , input impedance 2.2k ohm terminate Hsync Positive/Negative Vsync...
  • Page 52 GENERAL PRODUCT SPECIFICATION(Continued) 220SW8 LCD Pin assignments: PIN No. SIGNAL Green/ SOG Blue Sense (GND) Cable Detect (GND) Red GND Green GND Blue GND DDC +3.3V or +5V Logic GND Sense (GND) Bi-directional data H/H+V sync V-sync Data clock 3.2.2 DVI Cable The input signals are applied to the display through DVI-D cable.

  • Page 53: Timing Requirement

    8 OSD Languages : ENGLISH, FRANCAIS, DEUTSCH, ITALIANO, ESPANOL, SIMPLIFIED CHINESE, Portugues, Russian Power On Logo : Power On show up Philips logo 3 seconds change to input signal . 1024x768_philips_de sktop_1.bmp (This picture is reference only. The official drawing will send out by Product Manager. )
  • Page 54 GENERAL PRODUCT SPECIFICATION(Continued) 220SW8 LCD 3.3.2 Factory preset modes (18 17 modes) Factory modes and preset modes are defined in the enclosed timing table file D:\ENG\monitor projects\timing table o...

  • Page 55: Horizontal Scanning

    GENERAL PRODUCT SPECIFICATION(Continued) 220SW8 LCD Horizontal scanning Sync polarity : Positive or Negative Scanning frequency : 30 – 83 K Hz Vertical scanning Sync polarity : Positive or Negative Scanning frequency : 56 - 76 Hz Power input connection Power cord length : 1.8 M Power cord type : 3 leads power cord with protective earth plug.

  • Page 56: Ddc /Ci Support And Smart Manage/Control

    GENERAL PRODUCT SPECIFICATION(Continued) 220SW8 LCD 3.10 DDC /CI Support and Smart Manage/Control In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with , Philps SmartManage, SmartControl V6.1, and Protrait Display Tune at least. 3.11 Hot-key definition D:\ENG\monitor projects\spec\H8\hot k 3.12 Smart contrast (Dynamic contrast ratio)
  • Page 57 GENERAL PRODUCT SPECIFICATION(Continued) 220SW8 LCD “SmartImage” with bitmap format. 3.14.2.3 Icon of each profile Each profile will use text instead of icon & text before. 3.14.2.4 User Operation Procedure A. 5 different modes are switched to next in the sequence from 1 to 5 then back to 1 while pressing this button: 1) Office Work 2) Image Viewing 3) Entertainment 4) Economy 5) Off.
  • Page 58 GENERAL PRODUCT SPECIFICATION(Continued) 220SW8 LCD B. Because each preset profiles will define default setting of these 3 parameters. Users can understand what is the value of that in preset profile by open the main OSD. C. When any SmartImage Lite profile had been enabled. The parameters in main OSD are still available for user to adjust.
  • Page 59 GENERAL PRODUCT SPECIFICATION(Continued) 220SW8 LCD 7. Gamma Table turn off to achieve 8. Fastest response time. (N/A for this model) 9. Smart Contrast set to “On” C. Image Viewing i. Purpose: Design for image viewing application, especially in slide show. The screen is dominated by picture. Powerpoint presentation could use this profile also.

  • Page 60: Perfecttune

    GENERAL PRODUCT SPECIFICATION(Continued) 220SW8 LCD 3.14.2.7 Demo mode A. Purpose: Built-in demo mode for sales in-store demo. B. Design: i. Dynamically split screen to 2 vertical frames with one vertical white line. The line width is 2 pixels. The left frame will be enhanced by SmartImage Lite and right frame remains original performance.

  • Page 61: Brightness

    GENERAL PRODUCT SPECIFICATION (Continued) 220SW8 LCD full screen 100 % duty cycle white signal (3) Warm up: more than 30 minutes after power on with signal supplied. (4) Ambient light: 400 -- 600 lux. (5) Ambient temperature: 20 ± 5 °C Brightness Follow Panel specification.
  • Page 62 GENERAL PRODUCT SPECIFICATION(Continued) 220SW8 LCD Product specification CIE coordinates (x,y) 11500K x = 0.270 ± 0.02 y = 0.281 ± 0.02 9300K x = 0.283 ± 0.02 y = 0.297 ± 0.02 8200K x = 0.291 ± 0.02 y = 0.306 ± 0.02 7500K x = 0.298 ±...

  • Page 63: Mechanical Characteristics

    GENERAL PRODUCT SPECIFICATION (Continued) 220SW8 LCD y = 0.329 ± 0.015 Mechanical characteristics Cosmetic - Qisda OTS ID with Philips front bezel Mechanical data files - ProE files required Location of Philips logo - Per Philips make-up sheet Gap between panel and front bezel < 1.2mm typ.

  • Page 64: Plastics Flammability

    • Plastic resin type selection should be referred to “plastic-Philips Pool monitor”. 5.12 Texture/Glossing of housing • The texture area and texture no should follow Philips make-up sheet. • The exterior surfaces shall have a uniform texture. Philips must approve the mold texturing.

  • Page 65: Product Dimension / Weight ( Refer To Philips Approved Sht 191/Sht560 )

    GENERAL PRODUCT SPECIFICATION (Continued) 220SW8 LCD 5.16 Product dimension / Weight ( Refer to Philips approved SHT 191/SHT560 ) • Unit dimension : 518.76*456.87*187.6 mm • Packed unit dimension: 590*522*150 mm • Net weight : 4.88 kg • Gross weight : 6.685 kg...

  • Page 66: Environmental Characteristics

    GENERAL PRODUCT SPECIFICATION(Continued) 220SW8 LCD • Air shipment - • Sea container 20'(pallet/slip sheet) • Sea container 40'(pallet/slip sheet) • Sea container 40' High Cube (pallet/slip sheet) • Land 53‘ MEGA Trailer (pallet/slip sheet) • Land 53‘ MEGA Trailer per HQ (pallet/slip sheet) •...

  • Page 67: Display Disturbances To External Environment

    GENERAL PRODUCT SPECIFICATION (Continued) 220SW8 LCD Display disturbances to external environment Reliability Mean Time Between Failures System MTBF (Including the LCD panel and CCFL) : 50,000 hrs Quality assurance requirements Acceptance test According to MIL-STD-1916D Control level AQL: (Please also refer to annual quality agreement) Customer acceptance criteria: UAW0377/00...
  • Page 68 GENERAL PRODUCT SPECIFICATION (Continued) 220SW8 LCD Philips’ Flat Panel Monitors Pixel Defect Policy Philips’ Flat Panel Monitors Pixel Defect Policy BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 220SW8 MODEL 1 lit sub-pixel 2 adjacent lit sub-pixels 3 adjacent lit sub-pixels (one white...
  • Page 69 GENERAL PRODUCT SPECIFICATION (Continued) 220SW8 LCD Fig 1: Measurement locations of Brightness Uniformity...
  • Page 70 GENERAL PRODUCT SPECIFICATION(Continued) 220SW8 LCD Fig 2: Cross talk pattern Gray level 46 (64 Gray level) Fig 3: Cross talk Pattern Center at Gray level 0 (Black)
  • Page 71 GENERAL PRODUCT SPECIFICATION (Continued) 220SW8 LCD SEPARATE SYNC. VIDEO HORIZONTAL VIDEO VERTICAL COMPOSITE SYNC. VIDEO HORIZONTAL FIG-4 TIMING CHART -1...

  • Page 72: General Product Specification

    Restriction on the use of certain hazardous substances. Lead, Cadmium, Mercury, Hexavalent Chromium, Polybrominated Bipheny1 (PBB) and Polybrominated Bipheny1 Ether (PBDE)(flame retardant). 10.4 WEEE Producer (Philips) responsible for retailer take back schemes and recycling. --System implemented. --Collection and recycle targets. 10.5 Ongoing Regulatory There's a possibility that other regulatory certificates will be required during the life of the product.
  • Page 73 220SW8 LCD Exploder Veiw Type: 220SW8...

  • Page 74: Arts List

    220SW8 LCD Spare Parts List Model: 220SW8 P anel+P C B A Model 220SW8FB1/69 220SW8FB1/27 220SW8FB1/00 220SW8FB1/75 220SW8FB1/93 220SW8FS1/00 Description P C M P hilips 12NC C MO LP L C MO LP L C MO LP L C MO...
  • Page 75 Panel & PCBA photos 220SW8 LCD Item QISDA 12NC Philips 12NC Description Photo 5F.LLBV9.001 996510010923 LCDM22 LM220WE1-TLD2 P (LPL) 5F.LMBV9.001 996510010626 LCDM22 M220Z1-L03 P ( CMO) 5E.0GN03.001 996510010630 CONTROL BOARD ASS'Y 5E.0GN02.001 996510010631 POWER BOARD ASS'Y 5E.0GN01.011 996510010627 MAIN (I/F) BOARD ASS'Y 5E.0GN01.001 996510010946...

  • Page 76: Repair Tips

    Repair Tips 220SW8 LCD 0. Warning preferably be equipped with a thermal control (soldering temperature: 225 to 250 C). All ICs and many other semi -conductors are susceptible to - The chip, once removed, must never be reused. electrostatic discharges (ESD). Careless handling during 1.4 Attachment of SMDs repair can reduce life drastically .

  • Page 77: Repair Tips

    More Information For more information on how to handle BGA devices, visit this URL: http://www .atyourservice.ce.philips.com (needs subscription). After login, select Magazine , then go to W orkshop Information . H ere you will find Information on how...

  • Page 78: Repair Flow Chart

    220SW8 LCD Repair Flow Chart Bad Power Board Power Board Check Scaler Board Bad Scaler Board...
  • Page 79 Repair Flow Chart 220SW8 LCD Check Power Board Check LCD Panel Control Board Board...

  • Page 80: Repair Flow Chart

    Repair Flow Chart 220SW8 LCD Check Power Board Check LCD Panel Control Board Board...

  • Page 81: Safety Test Requirements

    Safety Test Requirements 220SW8 LCD 3. Equipments and Connection All units that are returned for service or repair must pass the original manufactures safety tests. Safety testing requires both Hipot and Ground Continuity testing. 3.1. Equipments For example : HI-POT TEST INSTRUCTION - Zentech 9032 PROGRAMMABLE AUT O SAFETY 1.Application requirements...

This manual is also suitable for:

220sw8fb1/00220sw8fb1/27220sw8fs1/00220sw8fb1/75220sw8fb1/93

Table of Contents