Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DTD152
Summary of Contents for Makita DTD152
- Page 1 INSTRUCTION MANUAL Cordless Impact Driver DTD152 Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DTD152 Fastening capacities Machine screw 4 mm - 8 mm Standard bolt 5 mm - 16 mm High tensile bolt 5 mm - 12 mm No load speed 0 - 2,900 min Impacts per minute 0 - 3,500 min... - Page 3 When battery pack is not in use, keep it away will reduce personal injuries. from other metal objects, like paper clips, Prevent unintentional starting. Ensure the coins, keys, nails, screws or other small metal switch is in the off-position before connecting objects, that can make a connection from one to power source and/or battery pack, picking terminal to another.
-
Page 4: Functional Description
right away. It may result in loss of your Installing or removing battery eyesight. cartridge Do not short the battery cartridge: Do not touch the terminals with any con- ductive material. CAUTION: Always switch off the tool before installing or removing of the battery cartridge. Avoid storing battery cartridge in a con- tainer with other metal objects such as CAUTION: Hold the tool and the battery car-... - Page 5 with a protection system. This system automatically NOTE: Depending on the conditions of use and the cuts off power to the tool to extend battery life. ambient temperature, the indication may differ slightly The tool will automatically stop during operation if the from the actual capacity. tool and/or battery are placed under one of the following conditions: Switch action Overloaded: The tool is operated in a manner that causes it to draw an abnormally high current. In this situation, release the switch trigger on the tool and stop the application that caused the tool to become overloaded. Then pull the switch trigger again to restart.
- Page 6 For tool with shallow driver bit hole Reversing switch action A=12mm Use only these type of driver B=9mm bit. Follow the procedure 1. (Note) Bit-piece is not necessary. For tool with deep driver bit hole A=17mm To install these types of driver B=14mm bits, follow the procedure 1. A=12mm To install these types of driver B=9mm...
-
Page 7: Installing Hook
Proper fastening torque for standard bolt NOTE: If the driver bit is not inserted deep enough into the sleeve, the sleeve will not return to its original position and the driver bit will not be secured. In this N•m (kgf•cm) case, try re-inserting the bit according to the instruc- tions above. -
Page 8: Maintenance
completely, voltage will drop and the fastening torque will be reduced. Driver bit or socket bit Failure to use the correct size driver bit or socket bit will cause a reduction in the fastening torque. Bolt • Even though the torque coefficient and the class of bolt are the same, the proper fasten- ing torque will differ according to the diame- ter of bolt. •... -
Page 9: Optional Accessories
Make sure to place the lead wire in opposite side Center. of the arm. • Driver bits • Hook • Plastic carrying case • Makita genuine battery and charger • Battery protector NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from country to country. 1. - Page 12 Makita Corporation 885432-0 20150522 www.makita.com...
Need help?
Do you have a question about the DTD152 and is the answer not in the manual?
Questions and answers