Page 2
How this manual is organized This manual is made up of nine chapters and appendices. CHAPTER 1 PARTS NAMES AND FUNCTIONS Contains external views and names of components and describes their functions. Information about the keys on the control panel is included to help you check operation or make adjustments. CHAPTER 2 SPECIFICATIONS Lists the specifications of each model, which enables you to make a comparison of different models.
Page 3
CHAPTER 9 MAINTENANCE MODE Describes the maintenance mode which is exclusively designed for the purpose of checks, settings and adjustments of the machine using the keys on the control panel. In the maintenance mode, you can update memory (EEPROM: electrically erasable programmable read-only memory) contents for optimizing the drive conditions of the head/carriage unit or the paper feed roller and paper ejection roller in the engine unit, if those units have been replaced, or for setting the CIS scanner area, for example.
SAFETY PRECAUTIONS To use the machine safely Please refer to these instructions for later reference and before attempting any maintenance. WARNING There are high voltage electrodes inside the Do not handle the plug with wet hands. Doing machine. Before you clean the machine, this might cause an electrical shock.
Page 5
WARNING Use caution when installing or modifying telephone lines. Never touch telephone wires or terminals that are not insulated unless the telephone line has been disconnected at the wall jack. Never install telephone wiring during a lightning storm. Never install a telephone wall jack in a wet location. This product must be installed near an AC power outlet that is easily accessible.
Page 6
Choosing a location Place the machine on a flat, stable surface that is free of vibration and shocks, such as a desk. Put the machine near a telephone wall jack and a standard, grounded AC power outlet. Choose a location where the temperature remains between 50°F and 95°F (10°C and 35°C).
Page 7
Legal limitations for copying Confidential...
Page 9
CHAPTER 1 PARTS NAMES AND FUNCTIONS This chapter contains external views and names of components and describes their functions. Information about the keys on the control panel is included to help you check operation or make adjustments. CONTENTS OUTLINE ........................1-1 CONTROL PANEL....................1-4 COMPONENTS .....................
Need help?
Do you have a question about the MFC845CW and is the answer not in the manual?
Questions and answers