Supplied accessories The (=) SRS (SOUND RETREIVAL SYSTEM) Remote Commander RM-Y168 (KV-32FS12 ONLY ) is manufactured by Sony Corporation under license from SRS Labs, Inc. It is covered by Remote Commander RM-Y169 (KV-32FS16 ONLY ) U.S. Patent No. 4,748,669. Other U.S. and Remote Commander RM-Y171 (KV-27FV16/29FV16/29FV16C ONLY ) foreign patents pending.
SECURITE DU FONCTIONNEMENT. NE LES REMPLACER QUE PAR DES SONY PARTS WHOSE PART NUMBERS APPEAR AS COMPOSANTS SONY DONT LE NUMERO DE PIECE EST INDIQUE DANS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS LE PRESENT MANUEL OU DANS DES SUPPLEMENTS PUBLIES PAR SONY.
Page 5
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Display of Standby/Timer LED Flash Count 2 times 4 times 5 times LED ON 0.3 sec. STANDBY/TIMER LED LED OFF LED OFF 0.3 sec. 3 sec. Diagnostic Item Flash Count* +B overcurrent 2 times I-Prot 4 times 5 times *One flash count is not used for self-diagnostic.
Page 6
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Handling of Self-Diagnostic Screen Display Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen during repairs. When you have completed the repairs, clear the result display to “0”. Unless the result display is cleared to “0”, the self-diagnostic function will not be able to detect subsequent faults after completion of the repairs.
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 SAFETY CHECK-OUT After correcting the original service problem, perform the Leakage Test following safety checks before releasing the set to the The AC leakage from any exposed metal part to earth customer: ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 1.
AUX and normal (CATV) input, you should consider using the Channel Fix feature, (see page 26). Your Sony remote control can be programmed to operate your cable box, (see page 36). If you are connecting to an indoor or outdoor antenna, you may need to When using PIP, you cannot view the AUX input in the window picture.
Connecting Your TV Operating Instructions Connecting Additional Equipment TV and Cable Box TV and VCR Cable Box Rear of TV Rear of TV From cable Connect the coaxial cable from your cable service to the IN jack on From your cable box. cable/ antenna Connect a coaxial cable (not supplied) from the OUT jack on your...
Page 10
Connecting Your TV Operating Instructions TV, Cable box, and Cable TV, VCR, and Cable box KV-27FS16, KV-27FV16, KV-32FS16, KV-29FV16 only Rear of TV For this set up, you can switch between scrambled channels (through your cable box) and normal (CATV) channels by pressing Rear of TV (KV-27FV16 only) Cable Box Cable box...
Page 11
Connecting Your TV Operating Instructions TV and Satellite Receiver TV, Satellite Receiver, and VCR Satellite Rear of TV antenna cable Rear of TV From From cable/ cable/ antenna antenna SATELLITE IN VHF/UHF AUDIO R AUDIO L VIDEO AUDIO R AUDIO L VIDEO Satellite receiver VHF/UHF LINE IN...
Brings up the custom guide of sound. your satellite receiver. MENU Displays the on-screen menu. SYSTEM Powers off all Sony equipment at Press again to exit the menu at once, (may not work with older any time. equipment). RESET Press to return to factory settings...
If, after reading these Operating Instructions, you have additional questions related to the use of your Some electronic equipment can create electrical noise, Sony television, please call our Direct Response Center at 1-800-222-SONY (7669) (U.S. residents which can interfere with TV reception.
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 2-4. PICTURE TUBE REMOVAL WARNING: BEFORE REMOVING THE ANODE CAP High voltage remains in the CRT even after the power is disconnected. To avoid electric shock, discharge CRT before attempting to remove the anode cap. Short between anode and CRT coated earth ground strap.
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 SECTION 3 SET-UP ADJUSTMENTS The following adjustments should be made when Perform the adjustments in order as follows: a complete realignment is required or when a new 1. Beam Landing picture tube is installed. 2. Convergence 3. Focus These adjustments should be performed with rated 4.
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 3-2. CONVERGENCE Horizontal Static Convergence Before starting convergence adjustments: If the blue dot does not converge with the red and green dots, 1. Perform FOCUS, V.LIN AND V.SIZE adjustments. perform the following: 1. Move BMC magnet (a) to correct insufficient H. Static 2.
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 4. Adjust XCV core to balance X axis. 5. Adjust YCH VR to balance Y axis. * / 4 6. Adjust vertical red and blue convergence with V.TILT 4 / * (TLV VR). 4 / * * / 4 Perform adjustments while tracking items 1 and 2.
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 3-4. SCREEN (G2) 3-6. WHITE BALANCE ADJUSTMENTS 1. Input a dots pattern. 1. Input an entire white signal with burst. 2. Set the PICTURE and BRIGHTNESS controls at minimum 2. Set to Service Adjustment Mode. and COLOR control at normal. 3.
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 SECTION 4 SAFETY RELATED ADJUSTMENTS 4-1. R564 CONFIRMATION METHOD Hold-Down Readjustment (HV HOLD-DOWN CONFIRMATION) AND If the setting indicated in step 2 of Hold-Down Operation READJUSTMENTS Confirmation cannot be met, readjustment should be performed by altering the resistance value of R564 component marked with The following adjustments should always be performed when replacing the following components which are marked with T505...
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 SECTION 5 CIRCUIT ADJUSTMENTS ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER Use the Remote Commander (RM-Y168, RM-Y169 or RM-Y171) to perform the circuit adjustments in this section. NOTE: Test Equipment Required: • Pattern generator • Frequency counter • Digital multimeter • Audio oscillator 5-1.
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Adjustment Items AVERAGE AVERAGE DATA DATA Reg # ITEM FUNCTION RANGE DATA NTSC 27 PAL M PAL N VIDEO NTSC 32 27FV 32FS HSIZ Horizontal Size Adjustment 0-63 HPOS Horizontal Position Adjustment 0-63 VBOW Vertical Line Bowing Adj. 0-15 VANG Vertical Line Bowing Slant Adj.
Page 24
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 AVERAGE AVERAGE DATA DATA Reg # ITEM FUNCTION RANGE DATA NTSC 27 PAL M PAL N VIDEO NTSC 32 27FV 32FS PDSO PDS OFF 0-15 HPKO HPK OFF Palette CORE CORE TRAP TRAP CHTR CH TRAP CBPF CBPF ENHO ENHOFF NMRD NMRD...
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 AVERAGE AVERAGE NTSC NTSC DATA DATA Reg # ITEM FUNCTION RANGE DATA PAL M PAL N VIDEO 27FV 32FS PDCO PCGA C_GAIN PAAF PSU2 PCVF PBIT BITSEL PAFC AFCBITSEL PACC ACC_LEVEL 0-63 PBUR BURST_CLK PEVE EVENUPRA PINW INV_WFF PINR INV_REF PREF RFF_FIX...
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 5-4. MA BOARD ADJUSTMENTS Display Position Adjustment (DISP) 1. Input a color-bar signal. H. Frequency (Free Run) Check 2. Set to Service Adjustment Mode. 1. Input a TV mode (RF) with no signal. 3. Select DISP with 2. Connect a frequency counter to base of Q501 4.
Page 27
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 V LINEARITY (VLIN) V CORRECTION (VSCO) V. Center Adjustment (VPOS) Perform this adjustment after performing H. Frequency (Free Run) Check. 1. Input a crosshatch signal. PIN AMP (PAMP) 2. Activate the Service Adjustment Mode. 3. Select the VPOS item with 4.
Page 37
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 MA BOARD TRANSISTOR VOLTAGE LIST Q001 Q151 Q305 Q352 Q365 Q379 [TUNING CONTROL, 2ND TUNER, Y/C/J] volt volt volt volt volt volt Q002 Q152 Q306 Q354 Q368 Q380 volt volt volt volt volt volt Q003 Q301 Q310 Q355 Q369 Q387 volt volt...
Page 38
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 [RGB DRIVE, CRT DRIVE] CA BOARD SCHEMATIC DIAGRAM CA BOARD WAVEFORMS R717 CN704 132.8V p-p (H) 135.9V p-p (H) 140.6V p-p (H) TO A BOARD R716 R718 100k (T505) 1/2W FOCUS J701 TO A BOARD (T505) G1-1 C707 0.0047 RV701 VSTAT CONTROL CA BOARD MARK (*) LIST...
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 SECTION 7 6-4. SEMICONDUCTORS EXPLODED VIEW • Items with no part number and no • The component parts of an assembly are • Items marked * are not stocked since they are 2SA1037AK-7146-QR 2SB734-7-34 2SC1740S-QRT 2SA1309A-QRSTA 2SC3840K description are not stocked because they indicated by the reference numbers in the seldom required for routine service.
REF. NO. PART NO. DESCRIPTION REMARK X-4037-842-1 BEZNET ASSY 26-28 2-163-920-01 PLATE, TLH CORRECTION 3-704-179-31 EMBLEM (NO.9), SONY 1-452-896-11 COIL, NA ROTATION (RT200) 4-068-985-04 DOOR A-1332-063-A CA (VAR) MOUNTED PC BOARD 3-703-574-00 RETAINER, DOOR A-1342-550-A VA (VAR) MOUNTED PC BOARD...
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: Les composants identifies per un trame et une marque The components identified by shading and mark sont critiques pour la securite. Ne les remplacer are critical for safety. Replace only with part number que par une piece portant le numero specifie. specified.
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 SECTION 8 ELECTRICAL PARTS LIST Note: The components identified by in this manual have been carefully factory-selected for each set in The components identified by shading order to satisfy regulations regarding X-ray and mark are critical for safety. Replace radiation.
Page 49
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 50
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 51
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 52
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 53
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 54
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by in this manual have been The components identified by shading carefully factory-selected for each set in order to satisfy regu- and mark are critical for safety. Replace lations regarding x-ray radiation. Should replacement be re- only with part number specified.
Page 55
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 56
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 57
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 58
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 59
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 60
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 61
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 62
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 63
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 64
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 65
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 66
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 67
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 68
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 69
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 70
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 71
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 72
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Note: Note: The components identified by shading Les composants identifies per un trame et une marque and mark are critical for safety. Replace sont critiques pour la securite. Ne les remplacer only with part number specified. que par une piece portant le numero specifie. REF.NO.
Page 73
KV-27FV16/29FV16/29FV16C/32FS12/32FS16 Sony Corporation English 2000ES74337-1 Sony Technology Center Printed in USA Product Quality Division 2000.5 9-965-885-03 Service Promotion Dept.
Page 74
HISTORY INFORMATION FOR THE FOLLOWING MANUAL: BA-5 SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION CHASSIS NO. KV-27FV16 RM-Y171 SCC-S40K-A KV-27FV16 RM-Y171 SCC-S41J-A KV-29FV16 RM-Y171 SCC-S38Q-A KV-29FV16C RM-Y171 SCC-S38R-A KV-32FS12 RM-Y168 SCC-S40F-A KV-32FS12 RM-Y168 SCC-S41F-A KV-32FS16 RM-Y169 SCC-S40G-A KV-32FS16 RM-Y169 SCC-S41G-A ORIGINAL MANUAL ISSUE DATE: 5/2000 ALL REVISIONS AND UPDATES TO THE ORIGINAL MANUAL ARE APPENDED TO THE END OF THE PDF FILE.
Page 75
BA-5 SERVICE MANUAL CHASSIS MODEL COMMANDER DEST CHASSIS NO. KV-27FV16 RM-Y171 SCC-S40K-A KV-27FV16 RM-Y171 SCC-S41J-A KV-29FV16 RM-Y171 SCC-S38Q-A KV-29FV16C RM-Y171 SCC-S38R-A KV-32FS12 RM-Y168 SCC-S40F-A KV-32FS12 RM-Y168 SCC-S41F-A KV-32FS16 RM-Y169 SCC-S40G-A KV-32FS16 RM-Y169 SCC-S41G-A CORRECTION-1 Subject: New Block Diagrams Correct the service manual as shown below. File this correction with the service manual.
Need help?
Do you have a question about the TRINITRON KV-29FV16 and is the answer not in the manual?
Questions and answers