Advertisement
The HP M210 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED
802.11a/b/g and 802.11n product. The Wi-Fi CERTIFIED logo
is a certification mark of the Wi-Fi Alliance.
HP M210 802.11n Access Point Quickstart
This Quickstart shows you how to install and get started using the HP M210 Access Point (JL023A AM, JL024A WW).
See also the M210 Configuration and Administration Guide and other M210 documentation available from www.hp.com/support/manuals. The M210 Access
Point is an IEEE 802.11n, dual-band, high-speed access point that provides simplified wireless LAN administration with clustering technology.
Hardware overview
Package contents
M210 Access Point (AP), power supply, documentation.
Ethernet port
The M210 is equipped with an auto-sensing 10/100/1000 BaseT Ethernet port with RJ-45
connector. This port is IEEE 802.3af-compliant enabling the M210 to be powered by Power
over Ethernet (PoE).
3
2
1
1 Power LED
4 Reset button
2 WLAN LED
5 Ethernet connector
3 Ethernet LED
6 Power connector
Radio and antennas
The M210 features an IEEE 802.11a/b/g/n-compliant radio with internal dual-band omni-
directional MIMO antennas.
Reset button
Press and quickly release the Reset button to restart the M210. To reset the M210 to factory
defaults, press the button until the status lights blink three times, then release.
4
5
6
Advertisement
Table of Contents
Related Manuals for HP M210 802.11n
Summary of Contents for HP M210 802.11n
-
Page 1: Hardware Overview
HP M210 802.11n Access Point Quickstart This Quickstart shows you how to install and get started using the HP M210 Access Point (JL023A AM, JL024A WW). See also the M210 Configuration and Administration Guide and other M210 documentation available from www.hp.com/support/manuals. The M210 Access Point is an IEEE 802.11n, dual-band, high-speed access point that provides simplified wireless LAN administration with clustering technology. -
Page 2: Status Leds
Use Cat 5e or better Ethernet cabling. inches) (#6 in North America). For drywall, HP recommends that wall anchors be used with Country of use: In some regions, you are prompted to select the country of use during setup. - Page 3 Login. topology of this simple wireless network is as follows: On the HP end user license agreement page, read the agreement, and then select Accept HP End User License Agreement. In some regions, a Country prompt appears. Select the country in which the M210 will operate and then select Save.
- Page 4 HP M210 802.11n Access Point Quickstart Configure a simple wireless network Select the environment that resembles your network, and then make the appropriate settings. Configure the radio: Wireless mode Select the desired Wireless mode. Supported modes and channels are determined by the regulatory domain.
-
Page 5: Change Administrator Login Credentials
To set up this M210 as the first AP in a cluster, set Clustering to Enabled, specify a Cluster key that is from 8 to 63 alphanumeric characters in length. HP recommends that the key be name (user defined but the identical name must be used for all members of the cluster), at least 20 characters long and contain a mix of letters and numbers. -
Page 6: Test The Wireless Network
DHCP server and an Internet connection. Furthermore, the Network name (SSID) is Specification Description assumed to be the default HP, and the Security method is WPA2 (AES). Product model number RSVLC-1103 Disconnect your computer from the PoE switch or injector or the M210.
Need help?
Do you have a question about the M210 802.11n and is the answer not in the manual?
Questions and answers