..........Can I move the Address Book registered on another Canon machine onto this machine? .
Page 3
Cleaning/Troubleshooting What is the model number of the staple cartridge for the fi nisher or the stamp cartridge for the feeder? ..... I cannot remove the toner cartridge after the toner replacement cover is opened.
I want to make a rush copy, but I cannot because of the long copy job. You can temporarily stop the current copy job and give priority to a rush copy by using the Interrupt mode. You can also give priority to a rush copy/print from the Status Monitor/Cancel screen.
When copying, the Scan screen for the next document is displayed. Is there a way to not display this screen? If [Job Build] is set, the Scan screen for the next document is displayed. By canceling the Job Build setting, the screen is not displayed. Scan Screen for Next Document ●...
I want to send the scanned originals via an e-mail. Which screen do I operate from? You can send an e-mail from [Scan and Send] on the Main Menu screen. ● To set: Press [Scan and Send] → [New Destination] → [E-Mail] → enter the e-mail address → press [OK]. •...
Can a mark be applied to the document that has been scanned? The machine can print a stamp on the scanned document by using the Stamp mode. Vertical Placement Horizontal Placement * Position at which stamp is applied ● To set: Press [Scan and Send] →...
Do I need to enter the address of the recipient every time? You can store frequently used destination in the Address Book. If the destination is stored beforehand, you do not need to enter the destination every time. ● Storing from the Remote UI: Press [Address] →...
Can you give me information on how to send to the SMB server and specify its settings? You can specify the settings using the following method. ● Setting the Shared Folder on the Computer-Side: For Windows XP, right-click the new folder → press [Sharing and Security] →...
Page 10
● Specifying the File Server on the Touch Panel Display: • Specifying the File Server by Host Search: Press [Scan and Send] → [New Destination] → [File] → from the protocol drop-down list, press [Windows (SMB)] → press [Search Host] → on the search criteria screen, enter the IP address for the computer you are using →...
Can I move the Address Book registered on another Canon machine onto this machine? You can use the import and export mode of the Remote UI to move the Address Book. ● Exporting the Address Book from Another Canon Machine: Press [Settings/Registration] →...
Can I forward the data received via I-fax? If you specify the forwarding settings, you can forward received documents that matches the previously set conditions to the Confi dential Fax Inbox of this machine, other machines, or the fi le server. Forward Confidential Fax Inbox...
How do I change the default settings (scan settings and fi le format) of the Scan and Send Basic Features screen? You can store the current settings as the default settings from on the Scan and Send Basic Features screen. Before Change After Change ●...
The quality of the image sent by I-fax is not good. Change the scan type or settings according to the type of original. Press [Preview] to check the document before sending. ● To set the Type of Originals and Exposure Settings: Press [Scan and Send] →...
How do I register/edit destinations in a one-touch button? Press [One-Touch] on the Scan and Send screen. ● Registering/Editing from the Scan and Send Screen Press [One-Touch] → [Register] → select the button to register/edit → press [Register/Edit] → register/edit the address →...
Can I add an arbitrary subject when sending e-mail? You can enter an e-mail subject in [Subject/Message] in [Options]. ● To set: Press [Scan and Send] → specify the destination → press [Options] → [Subject/Message] → enter the subject → press [OK] → [Close]. •...
How do I change the storage period for the scanned fi le stored in the Mail Box? You can change the time until fi les are automatically erased from [Set/Register Mail Boxes] in (Settings/Registration). Change the settings, if necessary. * You can set the time until the fi les are automatically erased to 0 (none), 1, 2, 3, 6, 12 hours, 1, 2, 3, 7, 30 days.
How do I access the Advanced Box from a computer? If the Advanced Box is opened with SMB, check the following. Press (Settings/Registration) → [Function Settings] → [Store/ Access Files] → [Advanced Box Settings] → [Open to Public] → check whether [By SMB] is selected. Press (Settings/Registration) →...
How do I forward received data to the Advanced Box? Specify an Advanced Box destination registered in the Address Book as the forwarding destination. ● Registering an Advanced Box Destination in the Address Book: Press (Settings/Registration)→ [Set Destination] → [Register Destinations] → [Register New Dest.] → [File] →...
How do I set to create a booklet with a fi le in a mail box? You can create a booklet using the Booklet mode. Specify the following settings. ● To set: Press [Access Stored Files] → [Mail Box] → select a stored document → press [Print] → [Change Print Settings] →...
I cannot print PDF fi les. Are optional products required? The following optional products are required to print PDF fi les: ● PS Printer Kit ● Direct Print Kit (for PDF/XPS) • If you are using the PS Printer Kit, the Direct Print Kit (for PDF/XPS) is unnecessary.
When printing from the computer, booklet was not made even though saddle stitch booklet mode was set. The Saddle Stitch mode cannot be used if you exceed the maximum number of sheets that can be saddle stitched. In that case, you can use the Divided Booklet mode.
The content of the reverse side appears on the copies. You can erase the background color of the original and prevent the original image on the reverse side of thin originals from appearing on the copies by using [Background Density]. ●...
The printed paper appears dirty. Also, the color appears to be diff erent from the original. If streaks appear on printed output, or random parts of the printed image are missing, clean the corona assembly wires inside the main unit. You can also automatically correct the gradation and color of the image from [Auto Adjust Gradation].
The printed paper is warped. If you print an original with many images or an original with a high image density, the paper may become warped. To reduce the warping, try the following. ● Use heavy paper: If you are using thin paper, try changing to with a weight of approximately 20 lb bond (80 g/m ●...
I had printed from the computer, but I did not fi nd the output. I am afraid that someone may have taken it by mistake. You can check the Print Logs from the touch panel display of this machine. If the job is listed as ‘OK’...
The edges are cut off when I perform copying with enlargement/reduction. Check the orientation of the paper or set to automatically rotate the paper to ensure it is copied correctly. Specify the following settings. ● Checking the Orientation of the Original: Check whether the orientation of the original in the feeder or on the platen glass matches the orientation of the paper loaded in the paper drawer.
Can I specify the scan settings from the computer and then store for the original loaded in the machine? It is possible if you are using Windows. Install the Network ScanGear Driver in your computer, and then switch the network scan function to online. ●...
Can I make copies of diff erent size originals at the same time? You can make copies of diff erent size originals at the same time by using the Diff erent Size Originals mode. * The Diff erent Size Originals mode enables you to copy or scan diff erent size originals with the same widths (11”...
Can I print on the reverse side of the preprinted paper? Load the paper into the Multi-Purpose Tray to print on the reverse side of the preprinted paper. ● To set: Load the side to print on facing up into the Multi-Purpose Tray, select the paper size → press [Next] → select the paper type →...
Can I output paper to a diff erent tray according to the function? You can specify the output tray from [Output Tray Setting] in (Settings/ Registration). Staple Finisher-F1 PRO or Booklet Finisher-F1 PRO Staple Finisher-D1 or Booklet Finisher-D1 ● To set: Press (Settings/Registration) →...
What are the types of paper that I can use? You can load and print on the following paper. Paper Drawer 1, 2 Paper Weight 14 lb bond to 80 lb cover (52 to 220 g/m Types of Paper Thin, Plain, Recycled, Color, Heavy, Letterhead, Bond, Pre-Punched Paper Drawer 3, 4 Paper Weight 14 lb bond to 80 lb cover (52 to 220 g/m...
How do I print data received via I-Fax on paper specifi ed in advance? You can change the paper source from [Paper Drawer Auto Selection On/Off ] in (Settings/Registration). ● To set: Press (Settings/Registration) → [Function Settings] → [Common] → [Paper Feed Settings] → [Paper Drawer Auto Selection On/Off ] →...
How can I manage documents that failed to be forwarded? You can specify how to manage jobs that failed to be forwarded in [Handle Files with Forwarding Errors] in (Settings/Registration). ● To set: Press (Settings/Registration) → [Function Settings] → [Receive/Forward] → [Common Settings] → [Handle Files with Forwarding Errors] →...
How do I print the data received from specifi c destinations only? You can set the Store/Print Received File mode in Forwarding Settings to print the data received from specifi c destinations only. ● Printing for Specifi c Destinations Only Press (Settings/Registration) →...
What is the model number of the staple cartridge for the fi nisher or the stamp cartridge for the feeder? The consumables for the feeder and fi nisher are as follows: Product Name: Stamp Ink Cartridge -C1 Notes: for the feeder Product Name: Staple-P1 Notes: for the Booklet Finisher Product Name: Staple-N1...
I cannot remove the toner cartridge after the toner replacement cover is opened. Check the touch panel display. The following screen is displayed. ● To remove the toner cartridge: Turn the locking lever to the right until it stops → avoid touching the tip of the toner cartridge → remove the toner cartridge, supporting it with both hands.
A paper jam has occurred. How do I solve this problem? How to clear the paper jam appears on the touch panel display: Follow the instructions to clear the paper jam. ● Fixing Unit (Inside the Main Unit) ● Feeder •...
Numbers such as #751 and #801 are displayed on the touch panel display. What does this mean? These are error codes indicating that a job or operation did not complete successfully. This is displayed on the Details screen from [Log] on the Status Monitor/ Cancel screen.
I cannot print from the computer. Did the machine malfunction? Check the following possible causes: Is the network cable disconnected? Is it possible that there is a network trouble problem? Ethernet Cable Is the machine turned ON? Is there a paper jam or a toner shortage? Did you exceed the maximum number of prints set by the Department ID Management? •...
It seems as though turning OFF the machine is diff erent from the previous imageRUNNER. I am afraid that this may be a wrong operation. For the previous imageRUNNER, you needed to press and hold the control panel power switch for more than three seconds before the machine goes to the Shutdown mode.
The touch panel display becomes completely black automatically. This is because the Auto Sleep mode is set. ● If the touch panel display is turned OFF: If the Auto Sleep mode is set, press the control panel power switch. ● To change the Auto Sleep Time: Press (Settings/Registration)→...
I have just sent an important document via I-fax. Can I check to make sure that it was sent correctly? You can check the send job status from the Status Monitor/Cancel screen or check that the sent transmission was completed using the Job Done Notice mode. ●...
Can I restrict the number of copies/prints? If Department ID Management is used, you can restrict the copy or print output within groups. ● Setting the Department ID Management and Registering the Password: Press (Settings/Registration) → [Management Settings] → [User Management] → [Department ID Management] →...
Can I change the language displayed on the touch panel display? You can change the language displayed from [Language/Keyboard Switch] in (Settings/Registration). Displayed Language: English Displayed Language: Other ● To set: Press (Settings/Registration) → [Preferences] → [Display Settings] → [Language/Keyboard Switch On/ Off ] →...
Can I change the screen or the order that the functions are displayed on the touch panel display when the power is turned ON? You can change the default display that appears after the machine is turned ON from [Default Screen at Startup] in (Settings/Registration).
I want to check the IP address for this machine to run the Remote UI, but I do not know how to check it. You can check the IP address from the touch panel display of this machine. ● Checking the IP Address of This Machine: Press (Settings/Registration) →...
Can I change the default settings of the printer driver? You can change the default settings of the printer driver from the computer you are using. This section describes the default settings of the Windows Printer Driver. ● To set: On the (Start) menu, click [Control Panel] →...
What is MEAP? MEAP stands for Multifunctional Embedded Application Platform and is a software platform for the Canon multitasking machines. You can expand the functions or customize them by installing the MEAP application from the computer to the multitasking machine.
Page 52
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 1185 XB Amstelveen, The Netherlands (See http://www.canon-europe.com/ for details on your regional dealer)
Need help?
Do you have a question about the IMAGERUNNER ADVANCE 8105 and is the answer not in the manual?
Questions and answers