Contents 1 Important Safety and important notice Trademark notice 2 Your DVD player Feature highlights Product overview 3 Connect Connect video cables Connect audio cables Route audio to other devices Connect USB device Connect to power outlet 4 Get started...
Never place the DVD player, remote control or batteries near naked Á ames or other heat sources, including direct sunlight. • Only use this DVD player indoors. Keep this DVD player away from water, moisture and liquid-À lled objects. •...
Page 5
Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. The USB-IF Logos are trademarks of Universal Serial Bus Implementers Forum, Inc.
2 Your DVD player Congratulations on your purchase, and welcome to Philips! To fully beneÀ t from the support that Philips offers, register your product at www.philips.com/welcome. This DVD player brings audio and video to life. Just plays practically any disc format, including the digital photos with absolutely no compromise to picture quality.
Page 7
( Open/Close ) • Opens or closes the disc compartment. c DISC MENU • Accesses or exits the disc menu. • Switches to disc mode. • For VCD and SVCD, turns PBC (playback control) on or off in PBC mode. ( Navigation buttons ) •...
A comprehensive interactive guide to help you connect your product is available at www.connectivityguide.philips.com. Connect video cables Connect this DVD player to TV to view disc play. Select the best video connection that the TV can support. •...
AUDIO OUT L/R jacks on this DVD player and the audio input jacks on the Route audio to other devices Route the audio from this DVD player to other devices to enhance audio play. Connect to digital ampliÀ er/receiver...
Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the DVD player. Connect the power cord to the power outlet. » The DVD player is ready to be set up for use.
• Go to the lowest channel on your TV, then press the Channel Down button until you see the Philips screen. • Press SOURCE button repeatedly on the remote control of your TV.
TV user manual on how to select the correct input on your TV. • If the audio output of this DVD player is routed to other audio device (such as audio system or receiver), turn on the audio device to the appropriate audio input channel. Refer to the device user manual for details.
Page 13
Note • During play, when progressive scan mode is on for both this DVD player and the TV, distorted picture may display. Turn off the progressive scan feature on both this DVD player and the...
Ensure that the DVD video you play is for the same region zone as your player (indicated on its back). • The DVD player can support play of the following À le formats: MP3/WMA/JPEG. • To play DVD-R, DVD+R or DVD-RW, the disc must be À...
Page 15
Button Action AUDIO/ Selects an audio language or CREATE channel on a disc. Only applicable to discs with multiple audio language or channel. SUBTITLE Selects the subtitle language on a disc. Only applicable to discs with multiple subtitle language. REPEAT Selects or turns off repeat mode.
Press the Numeric buttons to enter the time where you want to skip to, then press OK Display play time During play, press INFO . » The disc status menu is displayed. Select [Time Disp.] , then press . » The display options are different depending on the disc type.
Folders/À les exceed the supported limit of this DVD player are not displayed or played. Play photo Play photo as slideshow This DVD player can play JPEG photos (À les with .jpeg or .jpg extensions). Insert a disc that contains the JPEG photos.
• To stop music play, press Play from USB device This DVD player plays or views MP3, WMA or JPEG À les that are stored on USB device. Connect a USB Á ash drive to the (USB) jack on this DVD player.
Page 19
• If the device does not À t into the USB jack, connect it through a USB extension cable. • Digital cameras that require additional programme installation when connected to a PC are not supported.
6 Adjust settings This section describes the various setting options of this DVD player. Symbol Option [General Setup] [Audio Setup] [Video Setup] [Preferences] Note • If the setup option is grayed out, it means the setting cannot be changed at the current state.
[Digital Output] Selects the setting based on the digital ampliÀ er/receiver that is connected through the digital jack. • [Off] - Disables digital output. • [PCM] - Downmixs to PCM format (2 channel). • [All] - Supports multi-channel audio formats. [Volume] Sets the default volume level when you play a disc.
Set the level of brightness, contrast, tint and color saturation, then press OK . [Component Video] Selects the video output that matches the video connection between this DVD player and the TV. • [Interlaced] – for component video ( Y Pb Pr ) connection.
Page 23
• This information is required when you want to À nd out if a newest software version is available at the Philips website that you may download and install on this DVD player. [Default] Resets all the settings of this DVD player to factory default, except for [Parental control] and [Password] settings.
7 Advanced features Create MP3 À les With this disc player, you can convert audio CDs into MP3 audio À les. The created MP3 audio À les are saved in the USB Á ash drive. Insert an audio CD. Connect a USB Á ash drive to the on this product.
OK . Write down the À le name, then press SETUP to exit the menu. Visit www.philips.com/support to check for the latest software version, using the À le name for this DVD player. Refer to the upgrade instructions for more information.
9 Specification Note • SpeciÀ cation and design are subject to change without notice. Accessories supplied • Remote control and batteries • Audio/video cables • Power cable Playback media • DVD-Video, Video CD/SVCD, Audio CD, CD-R/CD-RW, DVD+R/+RW, DVD-R/- RW, Picture CD, MP3-CD, WMA-CD, USB Á...
Page 27
Power • Power supply rating: 110 V - 240 V; 50/60 • Power consumption: < 10 W • Power consumption in standby mode: < Laser speciÀ cation • Type: Semiconductor laser InGaAIP (DVD), AIGaAs (CD) • Wave length: 655 nm (DVD), 790 nm (CD) •...
If the problem remains unsolved, register your DVD player and get support at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of your DVD player. The model number and serial number are on the back or bottom of your DVD player.
11 Glossary Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-deÀ nition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen.
Need help?
Do you have a question about the DVP3320/55 and is the answer not in the manual?
Questions and answers