Page 2
Accessories supplied - Remote control and 2 AAA batteries - User manual Optional accessory - A wireless Philips USB adaptor(named WUB1110,sold separately) - Multimedia connections:Wi-Fi 802.11b/g/n - Connectivity: USB - Ambient temperature:5 degC to 40 degC - Dongie dimensions (W X H X D):28.4 X 82 X13.4mm...
Page 3
1.1 PCBs Location PSU PCBA MAIN BOARD VERSION VARIATIONS Type/Versions: BDP2930 Service policy Board in used: MAIN BOARD PSU PCBA *TIPS: C -- Component Lever Repair. M -- Module Lever Repair X -- OCX...
Page 4
6) Restart the set. B) Update software via USB Flash Drive: 1) Go to www.philips.com/support to check if the latest software version is available for this player. 2) Download the software onto a USB flash drive' s root DIR named "UPG_ A L L " .
Page 5
2.0 Safety instruction 1. General safety 2. Laser safety Safety regulations require that during a repair: This unit employs a laser. Only qualified service . Connect the unit to the mains via an isolation personnel transformer. May remove the cover, or attempt to service this .
Page 6
3.0 Instruction for Use You can download this information from the following websites: http://www.philips.com/support http://www.p4c.philips.com...
Page 7
4.0 MECHANICAL AND DISMANTLING INSTRUCTIONS The following guidelines show how to dismantle the player. Step1: Remove 3 screws around the Top Cover, and then remove the Top Cover Step2: Dismantling Front Panel,the CD door should be removed first, then gently pull the Panel out from the set. use an acuate press the reset hole to release the disc tray;...
Page 8
Trouble shooting chart No display , and buttons do not work No display on LED DISPLAY, and buttons do not work Check every supply voltage on main board is Refer to Power supply board part normal Check +5V,+12V, voltage on the power Fix the power board board Check the signals of the PU4's...
Page 9
Trouble shooting chart Remote control does not work Remote control does not work Check whether the remote Replace the battery for remote controller’s battery controller exhausted or not. Check the Power supply board part Check the IR1 power supply is OK Check whether bad solder exits on IR1'pins Fix the connection Replace IR1...
Page 10
Trouble shooting chart Can’t read disc or can’t open the disk door Can’t read disc or can’t open the disk door Check whether Check the connection of the 16PIN cable DVD loader running is from PJ1 on the Power Board. normal Check 40pin and 8pin cable Fix the connection...
Need help?
Do you have a question about the BDP2930 /12 and is the answer not in the manual?
Questions and answers