SERVICE MANUAL
Ver 1.0 2002. 01
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
300 watts minimum continuous average power into 4 ohms, 20 Hz to
300 Hz with no more than 0.2% total harmonic distortion per Car
Audio Ad Hoc Committee standards.
Other Specifications
Circuit system
OTL (output transformerless) circuit
Pulse power supply
Inputs
RCA pin jacks
High level input connector
Outputs
Speaker terminals
Through out pin jacks
1 – 8 Ω
Speaker impedance
600 W (at 4 Ω)
Maximum outputs
1200 W (at 2 Ω)
Rated outputs (supply voltage at 14.4 V)
300 W (20 Hz – 300 Hz, 0.2% THD, at 4 Ω)
600 W (20 Hz – 300 Hz, 0.6% THD, at 2 Ω)
1000 W (20 Hz – 300 Hz, 1.2% THD, at 1 Ω)
Frequency response
5 Hz – 300 Hz (
0.06% or less (at 100 Hz, 4 Ω)
Harmonic distortion
Sony Corporation
9-873-465-01
2002A0400-1
e Vehicle Company
© 2002. 1
Published by Sony Engineering Corporation
XM-1600GSD
SPECIFICATIONS
+0.5
dB)
–3
Input level adjustment range
0.2 – 6.0 V (RCA pin jacks)
0.4 – 12.0 V (High level input)
Low-pass filter
50 – 300 Hz, –18 dB/oct
Low boost
0 – 10 dB (40 Hz)
Power supply voltage
10.5 – 16 V
at rated output : 40 A (4 Ω)
Current drain
Remote input : 2 mA
Approx. 358 × 50 × 264 mm (w/h/d)
Dimensions
× 2 × 10
(14
1/8
projecting parts and controls
Mass
Approx. 3.5 kg (7 lb. 11 oz.) not incl. accessories
Supplied accessories
Mounting screws (4)
Design and specifications are subject to change without
notice.
Notes on Chip Component Replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be
damaged by heat.
MONAURAL POWER AMPLIFIER
US Model
Canadian Model
in.) not incl.
1/2
1
Need help?
Do you have a question about the XM-1600GSD and is the answer not in the manual?
Questions and answers