hit counter script
Philips 200WP7EB/00 Service Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Monitor
  5. 200WP7EB/00
  6. Service manual

Philips 200WP7EB/00 Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

20.1" LCD Monitor
Service
Service
Service
Description
Important Safety Notice----------------------------------2
Technical Data------------------------------------------3~4
Connection to PC------------------------------------------5
On-screen Display(OSD) ---------------------------- 6~9
Safety Test Requirement-------------------------------10
Aging Mode/OSD Lock/unlock ------------------------11
Factory Mode---------------------------------------------12
Definition of pixel defects ------------------------------13
Panel Failure Mode--------------------------------------14
Trouble Shooting------------------------------------15~16
Mechanical Instructions ---------------------------17~18
Display Adjustments -------------------------------19~20
DDC Instructions & DDC Data--------------------21~28
Firmware Upgrade for CPU----------------------- 29~30
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS
AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC
EQUIPMENT CONTAINING HIGH VOLTAGES.
CAUTION: USE A SEPARATE ISOLATION TRANSFORMER FOR THIS UNIT WHEN SERVICING.
REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES
Published by BCU Monitors
Printed in Suzhou
200WP7EB/00
200WP7ES/00
200WP7ES/01

TABLE OF CONTENTS

Description
Page
Electrical Instructions------------------------------ 31~32
Repair Tips------------------------------------------- 33~34
«
Repair Flow Chart----------------------------------- 35~37
Function Block Diagram---------------------------------38
Scaler Schematic Diagram & C.B.A(for */00) --39~46
Power Schematic Diagram & C.B.A--------------47~50
USB Diagram & C.B.A ------------------------------51~53
Control Schematic Diagram & C.B.A------------ 54~55
Exploded View------------------------------------------ --56
General Product Specification --------------------57~81
Recommended/Spare parts list-------------------82~86
Different Parts List ---------------------------------------87
Scaler Schematic Diagram & C.B.A(for */01) --88~95
Updated Parts---------------------------------------------96
Revision List-----------------------------------------------97
SAFETY NOTICE
Copyright reserved
Subject to modification F Jun. 02 2006
Hudson 7
Horizontal frequencies
30 - 98 KHz
Page
GB
GB
3138 106 10504

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 200WP7EB/00 and is the answer not in the manual?

Questions and answers

Related Manuals for Philips 200WP7EB/00

Summary of Contents for Philips 200WP7EB/00

  • Page 1: Table Of Contents

    Hudson 7 20.1" LCD Monitor Service Service 200WP7EB/00 Service 200WP7ES/00 200WP7ES/01 Horizontal frequencies 30 - 98 KHz TABLE OF CONTENTS Description Page Description Page Electrical Instructions------------------------------ 31~32 Important Safety Notice----------------------------------2 Repair Tips------------------------------------------- 33~34 Technical Data------------------------------------------3~4 « Repair Flow Chart----------------------------------- 35~37...

  • Page 2: Important Safety Notice

    TO ENSURE THE CONTINUED RELIABILITY OF THIS Company** Equipment. The service procedures PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S recommended by Philips and described in this service REPLACEMENT PARTS, WHICH ARE LISTED WITH manual are effective methods of performing service THEIR PART NUMBERS IN THE PARTS LIST SECTION operations.

  • Page 3: Technical Data

    Technical Data 200WP7 LCD Go to cover page ELECTRICAL SPECIFICATION 1). VESA Analog Input signal: Video, Hsync., Vsync General 1.1. Product description " The Hudson 7, 20.1 WSXGA TFT flat panel monitor is specified Video: 0.7 Vp-p, input impedance, 75 ohms @DC as a display peripheral with Analog video signal input, Digital video input 20.1 TFT LCD display.
  • Page 4 Technical Data 200WP7 LCD Go to cover page Signal interface 15Pins, D-sub male with DDC2B Pin assignments 24Pins, DVI-D male with DDC2B Pin assignments Sync polarity: -Hori.sync positive/negative -Vert.sync positive/negative 1.3.7. Controls: Front side: - DC power switch - OSD function key (OK) - UP - DOWN - RIGHT...

  • Page 5: Connection To Pc

    USB 1.1 or USB 2.0 depends on your PC's specification 5 USB upstream and downstream Connect to PC Connect the power cord and DVI cable to the back of the monitor firmly. (Philips has pre-connected VGA cable for the first installation.)
  • Page 6 Description of the On Screen Display What is the On-Screen Display? This is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance of the monitors directly through an on-screen instruction window. The user interface provides user-friendliness and ease-of-use when operating the monitor.
  • Page 7 On Screen Display 200WP7 LCD Go to cover page...
  • Page 8 On Screen Display 200WP7 LCD Go to cover page...
  • Page 9 On Screen Display 200WP7 LCD Go to cover page...
  • Page 10 200WP7 LCD Go to cover page 3. Equipments and Connection All units that are returned for service or repair must pass the original manufactures safety tests. Safety testing requires both Hipot Ground Continuity testing. 3.1. Equipments For example : HI-POT TEST INSTRUCTION - ChenHwa 9032 PROGRAMMABLE AUTO SAFETY TESTER 1.Application requirements...
  • Page 11 200WP7 LCD Go to cover page Front View WAIT FOR AUTOMATIC ADJUSTMENT This screen appears when you press the "AUTO" buttons at the same time. It will disappear when the monitor is properly adjusted ATTENTION SIGNAL WAITING FOR AUTOMATIC ADJUSTMENT Access Aging..
  • Page 12 200WP7 LCD Go to cover page Front Control Panel Access Factory Mode How to get into Factory Mode Menu Step1: Turn off monitor. Step2: [Push " " & " " buttons at the same time and hold it] +[Press power " "...
  • Page 13 Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or subpixel defects exceeding the tolerances listed in the following tables.

  • Page 14: Failure Mode Of Panel

    Failure Mode Of Panel 200WP7 LCD Go to cover page Quick reference for failure mode of LCD panel this page presents problems that could be made by LCD panel. It is not necessary to repair circuit board. Simply follow the mechanical Polarizer has bubbles instruction on this manual to eliminate failure by replace LCD panel.

  • Page 15: On-Screen Display(Osd)

    200WP7 LCD Go to cover page This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Common Problems Having this problem Check these items ·...
  • Page 16 Green, red, blue, dark, and white dots remains The remaining dots are normal characteristic of the liquid crystal used in today’ s technology For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative...

  • Page 17: Mechanical Instructions

    Mechanical Instructions 200WP7 LCD Go to cover page 1.Back view as Fig.1 Fig.1 Fig.6 3. Remove cable base as Fig7 and Fig.8 2.remove the base - Step 1: Place the monitor face down on a smooth surface as Fig 2. Be carefully to prevent the scratch and injury during the uninstallation.

  • Page 18: Mechanical Instructions

    Mechanical Instructions 200WP7 LCD Go to cover page Fig.11 Fig.15 8. Remove the control board 6.Remove the power board and scaler board -unscrew the screws and disconnect the connector as Fig.16 -unscrew the screws and disconnect the connectors as Fig.13,Fig.14 Fig.16 Fig.13 Fig.14...

  • Page 19: Display Adjustments

    Display Adjustment 200WP7 LCD Go to cover page TO access factory mode 2. Apply a 1280x1024/60Hz signal with white pattern.Set 1. Turn off monitor(do not turn off PC) 2. Press AUTO , OK and the power simultaneously on the frond control brightness control at 100% and contrast control at 50%.
  • Page 20 200WP7 LCD Go to cover page 2.9 Adjust the R, G, B Sub-Gain on factory mode for the screen center, the 1931 CIE chromaticity (X, Y) co-ordinates shall be as follows. 9300°K 6500°K 0.283 ± 0.005 0.313 ± 0.005 x (center) 0.297 ±...

  • Page 21: Ddc Instructions

    DDC Instructions 200WP7 LCD Go to cover page General Pin Assignment Input DVI-D connector pin assignment DDC Data Re-programming In case the DDC data memory IC or main EEPROM which storage all factory settings were replaced due to a defect, the serial numbers have Fig.
  • Page 22 DDC Instructions 200WP7 LCD Go to cover page Configuration and procedure 3. At the submenu, type the letter of your computer's hard disk drive followed by :EDID45 (for example, C:\EDID45, as shown in Fig. 7). There are 3 chips contained OSD string, serial number..etc on the circuit board, main EEPROM which storage all factory settings,OSD string.
  • Page 23 DDC Instructions 200WP7 LCD Go to cover page Re-programming Analog DDC IC Step 3: Modify DDC data (verify EDID version, week, year) Step 1: After initialize alignment box, connecting all cables and Click (new function) icon from the tool bar, bring up box as shown in Fig.
  • Page 24 DDC Instructions 200WP7 LCD Go to cover page Step : 8 Modify serial number in OSD 2. Access Factory Mode -1. Unzip the serial number.zip to your computer, then open the folder as shown in Fig.20. - Turn off monitor. -2.
  • Page 25 DDC Instructions 200WP7 LCD Go to cover page Step 3: Modify DDC data (verify EDID version, week, year) Re-programming Digital DDC IC Step 1: After initialize alignment box, connecting all cables and Click (new function) icon from the tool bar, bring up box as shown in Fig.
  • Page 26 DDC Instructions 200WP7 LCD Go to cover page Step 5: Write DDC data BOM Code 1. Configuration should be as Fig. 31. And press OK. Panel Supplier CODE LPL(LG) B Z 3 A 0 6 0 1 0 0 0 0 0 1 SERIAL NO YEAR/WEEK Fig.

  • Page 27: Ddc Data

    Serial Number White Y coordinate : 0.329 Monitor Descriptor #3 Established Timings Monitor Name : Philips 200WP Established Timings I Monitor Descriptor #4 720 x 400 @70Hz (IBM,VGA) Monitor Range Limits 640 x 480 @60Hz (IBM,VGA) Min. Vt rate Hz...
  • Page 28 Standard Default Color Space : Primary color space Monitor Descriptor #3 Preferred Timing Mode : Detailed timing block 1 Monitor Name : Philips 200WP Color Characteristics Monitor Descriptor #4 Red X coordinate : 0.64 Monitor Range Limits Red Y coordinate : 0.352...

  • Page 29: Isp Instruction

    ISP Instruction 200WP7 LCD Go to cover page Double click the shortcut on the desktop Configuration and procedure Fig. 4 "Easywriter " The software is provided by Novatek to upgrade the firmware of CPU. It is a windows-based program, which cannot be run in MS-DOS. The tool (3138 106 10396) is for the interface between "Parallel Port of To Printer port...
  • Page 30 ISP Instruction 200WP7 LCD Go to cover page Press the file exit to end program, as shown in Fig.9 Fig.9 If there is a warring message coming as shown in Fig 10. , you have to check the AC power, Video cable, or Novatek MCU. You can enter factory mode to confirm the CPU version...

  • Page 31: Electrical Instructions

    Electrical instructions 200WP7 LCD Go to cover page General points Item H.Freq. Mode Resolution V.Freq. (KHz) (Hz) During the test and measuring, supply a distortion free AC mains voltage to the apparatus via an isolated transformer 48.363 VESA 1024x768 60.004 with low internal resistance.

  • Page 32: Electrical Instructions

    Electrical instructions 200WP7 LCD Go to cover page 67.500 VESA 1152x864 75.000 sRGB 68.700 MACINTOSH 1152x870 75.000 0.313 ± 0.008 x(center) 0.329 ± 0.008 61.845 SUN WS 1152x900 66.004 y(center) 220 ± 10 Ynits 71.810 SUN WS 1152x900 76.150 60.000 VESA 1280x960 60.000...

  • Page 33: Repair Tips

    Repair Tips 200WP7 LCD Go to cover page 0. Warning preferably be equipped with a thermal control (soldering temperature: 225 to 250 C). All ICs and many other semi-conductors are susceptible to - The chip, once removed, must never be reused. electrostatic discharges (ESD).
  • Page 34 200WP7 LCD Go to cover page 3. Lead-free product identification You can identify lead-free product by Philips-lead-free logo on PCB. 4. Lead-free product repair instruction 4.1 Use only lead-free Solder Alloy 0622 149 00106(1.2mm SAC305) or 0622 149 00108(1.0mm SAC305).

  • Page 35: Repair Flow Chart

    Repair Flow Chart 200WP7 LCD Go to cover page AC IN Power Board Control Board Scaler Board LCD Panel No power (power indicator off) Check 12V/5V/3.3V Bad power board Bad Scaler Board Check Scaler Board Check Control Board Check Control Wires Check LCD Panel...
  • Page 36 200WP7 LCD X 21 Repair Flow Chart Go to cover page Bad Power Board Power Board Check Scaler Board Bad Scaler Board...
  • Page 37 Repair Flow Chart 200WP7 LCD Go to cover page Check Power Board Check LCD Panel Control Board Board...

  • Page 38: Control Board

    200WP7 Block Diagram Block Diagram 200WP7 LCD Go to cover page Panel Backlight Panel (3 CCFL) • 30 Pin wire harness(LVDS) RGB//DE/Hsync/Vsync Panel Vcc Connector (5V for QDI/AU) Scalar(LVDS interface) AC-DC Power supply Connector Inverter and 30 pin wafer Connector Connector DC-DC converter Dual input...
  • Page 39 Scaler Diagram-1 200WP7 LCD...
  • Page 40 Scaler Diagram-2 200WP7 LCD...
  • Page 41 Scaler Diagram-3 200WP7 LCD...
  • Page 42 Scaler Diagram-4 200WP7 LCD...
  • Page 43 Scaler Diagram-5 200WP7 LCD...
  • Page 44 Scaler Board C.B.A.-1 200WP7 LCD...
  • Page 45 Scaler Board C.B.A.-2 200WP7 LCD...
  • Page 46 Scaler Board C.B.A.-3 200WP7 LCD...
  • Page 47 Power Diagram-1 200WP7 LCD...
  • Page 48 Power Diagram-2 200WP7 LCD...
  • Page 49 Power Board C.B.A.-1 200WP7 LCD...
  • Page 50 Power Board C.B.A.-2 200WP7 LCD...
  • Page 51 200WP7 LCD...
  • Page 52 200WP7 LCD...
  • Page 53 200WP7 LCD...
  • Page 54 200WP7 LCD...
  • Page 55 200WP7 LCD...
  • Page 56 200WP7 LCD X 21 Go to cover page...

  • Page 57: General Product Specification

    . CE ENVIRONMENTAL POLICY . ANTI-GLARE TO REDUCE LIGHT REFLECTION . POWER MANAGEMENT CAPABILITY . SOG SUPPORT . TCO 03 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 58 Test conditions Resolution Brightness Image size 4.4.1 Actual display size 4.4.2 Max. scan size Brightness uniformity Cross-talk White color adjustment 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 59 Display disturbances to external environment 6.4.1 Reliability Mean time between failures Quality assurance requirements Acceptance test Serviceability 10.0 Lcd panel characteristics requirements 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 60 30 minutes that brightness stability is optimal, and follows strictly after panel specification. PRODUCT PROFILE This display monitor unit is a color display monitor enclosed in PHILIPS global styling cabinet, which has an integrated tilt and swivel base. Type NR.
  • Page 61 C-tick, CE (Europe), FCC (USA), IC (Canada), VCCI (Japan), BSMI Ergonomics E2000, Nutek(Sweden), TCO2003 (T-color) & TCO95 (Black/Silver), TUV/GS Compatibility Windows2000, Windows 98/Me, Windows XP, NSTL 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 62 Input signal: Upstream input (V , D+, D-, GND) via USB-B receptacle. Output signal: Downstream output (V , D+, D-, GND) through USB-A receptacle 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 63 Analog V-sync TMDS data1- TMDS data1+ TMDS data1 shield Ground (return for +5V and H/Vsync) Hot plug detect TMDS data0- 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 64 VBUS Data+ Data- 3.2.5 Software control functions via OSD/control adjustable functions: (1) PC Analog only Signal Input Mode Adjustable functions: 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 65 Default starting point Brightness & Contrast Brightness Sliding bar Contrast Sliding bar Color Original 9300K 6500K 6500K sRGB User define 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 66 Exit Brightness & Contrast Brightness Contrast Color Original Color, 9300K,6500K, sRGB, User Define Input Selection Analog(D-Sub), Digital (DVI-D), Analog (DVI-A) 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 67 H-video width (us) 25.422(640 dots) 25.42(720dots) 25.422(640 dots) 21.164(640 dots) H-front porch (us) 0.636(16 dots) 0.636(18dots) 0.636(16 dots) 2.116(64 dots) 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 68 0.043 (4 line) 0.015 (1 line) SYNC. H/V - / - + / + - / - + / + POLARITY 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 69 12.804(1024 lines) 16.000(1200 lines) 16.082(1050 lines) V-front porch (ms) 0.012 (1 line) 0.013(1 lines) 0.046(3 lines) SYNC. H/V POLARITY SEP. SYNC 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 70 In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0) use DDC 2B and EDID 3.0 structure 2.0 Visual characteristics 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 71 22 preset modes Brightness: >=300 nits (at panel color temperature, at center of the screen, set contrast 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 72 9300K CIE coordinates X = 0.283 +/- 0.020 Y = 0.297 +/- 0.020 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 73 Tilt angle ° Swivel angle : Transportation packages 5.4.1 Shipping dimension/Weight Carton dimension : 579(W) X 267(H) X 513(D) mm 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 74 Electrical function ok Test Mechanical function ok Result No serious damage on set appearance Shock For design evaluation only Test Operating 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 75 The serviceability of this monitor should fulfill the requirements which are prescribed in UAW-0346 and must be checked with the check list UAT-0361. 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 76 3 or fewer Total bright dot defects of all types Dark Dot Defects 1 dark subpixel 2 adjacent dark subpixels 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 77 Total black dot defects of all types Total bright or black dot defects of all types *Note: 1 or 2 adjacent subpixel defects= 1 dot defect 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 78 GENERAL PRODUCT SPECIFICATION 200WP7 LCD Fig 1: Brightness Uniformity L/10 W/10 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 79 Fig 2: Cross talk pattern Gray level 46 (64 Gray level) Fig 3: Cross-talk Pattern Center at Gray level 0 (Black) 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 80 GENERAL PRODUCT SPECIFICATION 200WP7 LCD SEPARATE SYNC. VIDEO HORIZONTAL VIDEO VERTICAL COMPOSITE SYNC. VIDEO HORIZONTAL FIG-4 TIMING CHART -1 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...
  • Page 81 GENERAL PRODUCT SPECIFICATION 200WP7 LCD VIDEO VERTICAL COMPOSITE SYNC. & VIDEO ( SYNC. ON GREEN ) HORIZONTAL VERTICAL FIG-5 TIMING CHART -2 20.1" TFT UXGA LCD Monitor (HUDSON 7-200WP7) 8639 000 16908 TYPE : 200WP7ES/00 2006-02-16 BRAND : PHILIPS Jason Wang 2006-02-16...

  • Page 82: Recommended Parts List

    200WP7 LCD Recommended Parts List Go to cover page 0004 313815761011 SUPER ERGO BASE ASSY 0030 313815761221 BEZEL ASSY-SILVER 0031 313815418091 BEZEL-SLIVER 0032 313815417771 BEZEL- DECO 0033 313815417781 CONTROL KNOB 0040 313815761001 BACK COVER ASSY-S 0041 313815417791 BACK COVER 0042 313815417811 MIDDLE COVER-SILVER 0043 313815133511 VESA PLATE...
  • Page 83 200WP7 LCD Model:200WP7ES/00(AUO Panel) PCB ASSY 3207 232270260103 RST SM 0603 RC21 10K PM5 R Mechanical Parts 1051 313815867281 SCALER ASSY-200WP7 AUO 3208 232270260103 RST SM 0603 RC21 10K PM5 R 0004 313815761011 SUPER ERGO BASE ASSY 3209 232270260103 RST SM 0603 RC21 10K PM5 R 0030 313815761221 BEZEL ASSY-SILVER...
  • Page 84 200WP7 LCD Go to cover page 2683 223886715279 CER1 0603 NP0 50V 27P PM5 R 3540 232270296001 RST SM 0603 JUMP. MAX 0R05 R 2684 223878615649 CER2 0603 X7R 16V 100N PM10 R 2685 223878615649 CER2 0603 X7R 16V 100N PM10 R 5201 242254944196 IND FXD 0805 EMI 100MHZ 120R R 2691...

  • Page 85: Spare Parts List

    Spare Parts List 200WP7 LCD 2227 223878615645 CER2 0603 X7R 16V 47N PM10 2443 223878615649 CER2 0603 X7R 16V 100N PM10 Model:200WP7ES/01(LPL Panel) 12NC: 8639 000 17096 2228 223878615645 CER2 0603 X7R 16V 47N PM10 2444 223878615649 CER2 0603 X7R 16V 100N PM10 2229 223878615649 CER2 0603 X7R 16V 100N PM10 2445 223878615649...
  • Page 86 Spare Parts List 200WP7 LCD Go to cover page 3305 212211805637 RST SM 0603 RC0603 22R PM5 1652 242202518955 SOC USB V 4P F 2.5 5411 5204 242254945582 IND FXD 0805 EMI 100MHZ 300R 3306 232270260101 RST SM 0603 RC21 100R PM5 1653 242202518957 SOC USB V 8P F 2.0/2.5 5402 5301 242254945582...
  • Page 87 200WP7 LCD Diversity of 200WP7EB/00 compared with 200P7ES/00 Item 12NC Description 863900017042 200WP7EB/00 0602 313811709571 E-D.F.U. 0130 313815569641 ENERGY STAR LABEL 0004 313815761131 SUPER ERGO BASE ASSY 0140 313800990651 PROCESS BOX 0300 282206240595 INK CARTRIDGE -EP-T 0030 313815761231 BEZEL ASSY...
  • Page 88 Jerry Chen 01. Contents PHILIPS UH7 200P7 SCALER SEHEMATIC FOR PROTOTYPE 2005-11-23 Jerry Chen 02. DSUB/DVI PHILIPS UH7 200WP7 SCALER SEHEMATIC FOR 2nd MODEL 2006-02-09 Jerry Chen 03. MCU 5205 /5206 /5207 change to 3215 /3216/3217 22R 04. SCALER 05. DDR 06.
  • Page 89 Scaler Diagram-2 200WP7 LCD +5V_ESD 5201 6201 6202 1201 A1 BAS 32L 6210 6211 6212 6213 1201 1202 F3 120 OHM 2201 A2 3207 3208 3209 2201 BAS 32L 2202 2202 A4 RX2+ RX2- RX1+ RX1- 0.1uF/16V 0.1uF/16V 2203 B3 BAV99(NC) 2230 BAV99(NC)
  • Page 90 Scaler Diagram-3 200WP7 LCD VCPU +3.3V 1351 A3 5351 1352 B5 1353 C1 VCPU 2351 A4 120 OHM VCPU 2353 A2 3351 2354 A3 2355 A3 2359 2351 2356 B2 1351 1M ? 4.7uF/25V 0.1uF/16V 2358 A5 3382 2359 A4 2360 2360 A1 2358...
  • Page 91 Scaler Diagram-4 200WP7 LCD +3.3AVDD +5V_PWR +3.3VMST +3.3AVDD PANEL_VCC 5402 5401 5403 5414 5417 +3.3AVDD_A 1401 F3 120 OHM +3.3AVDD 120 OHM +3.3AVDD_D 120 OHM (NC) 1402 B10 120 OHM 120 OHM 2401 A4 5413 2402 A4 7405 2401 2403 2404 2451 100R...
  • Page 92 Scaler Diagram-5 200WP7 LCD 5301 +2.5VDDR +2.5V_DMQ 120 OHM 2302 2303 2304 2305 2306 2307 2308 2309 2310 22U/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 2302 A5 7302 +5V_PWR 2303 A5 2304 A5 +2.5VDDR 2305 A6 2306 A6 2307 A6 2308 A7 2332...
  • Page 93 Scaler Diagram-6 200WP7 LCD +3.3V 1501 B6 +3.3V_USB 1505 A1 2501 B2 3501 47 ? 1/16W 2522 2502 B3 1505 BRIGHTNESS_RES 4 2503 B4 3502 47 ? 1/16W 2504 B2 BL_CONTROL 3 3503 47 ? 1/16W 3504 3515 3516 2505 B4 0.1uF/16V 10K? 10K?
  • Page 94 Scaler Board C.B.A.-1 200WP7 LCD 1201 D2 2313 A2 2425 B1 2531 B4 3306 B2 3417 B1 5415 A3 1202 D3 2314 A2 2426 B1 2532 A4 3307 B2 3418 B1 5416 A3 1351 B3 2315 B2 2427 B2 2533 A4 3308 B2 3501 A4 5417 A1 1352 C4 2316 A3 2428 C2 2534 A4 3309 B2 3502 A4 5501 B4 1353 B4 2317 A2 2429 B1 2535 A3 3310 A2 3503 A4 5502 B4 1401 C1 2318 B2 2430 B2 2536 A3 3311 B2 3504 C4 5503 A4...
  • Page 95 Scaler Board C.B.A.-2 200WP7 LCD...

  • Page 96: Updated Parts

    According to the ECO-CA005956,Add QSG-ergo base and Jig on P.E. bag for 200WP7,Following is the detail 1.Item 0129 Qty from 1to 2, and add new Item: 0142-313815524581- QUICK SET GUIDE-ERGO BASE 12NC Description 863900016908 200WP7ES/00 863900017042 200WP7EB/00 863900017096 200WP7ES/01 863900017104 200WP7EB/01 Action Item...
  • Page 97 200WP7 LCD Manual 12NC(VERSION) Release Date Change Instruction 3138 106 10503 Apr-7-06 Initial Release 3138 106 10503 Apr-20-06 Panel changed(P84) 3138 106 10503 Apr-28-06 Add QSG-ergo base and Jig on P.E. bag (P86) 3138 106 10503 Jun-02-06 Change scaler board version(P86) 3138 106 10504 Dec-04-06 Add 200WP7ES/01(P88~P95)

This manual is also suitable for:

200wp7es/00200wp7es/01

Table of Contents