Advertisement
Quick Links
Download this manual
See also:
User Manual
Philips Portable DVD Player PET717
1
Charge the built-in battery
Step 1 Switch the
POWER ON / OFF/CHR
OFF/CHR
position.
Step 2 Connect the supplied AC adaptor to the
on the DVD Player and to the AC outlet.
The red charge indicator turns on. It takes about 4 hours to fully
charge the battery.
When the battery is fully charged, the red charge indicator turns off.
Tip
-
You can only charge the batter y when the temperature is
between 0°C and 35°C.
-
When headphones are connected to the DVD Player, the fully
charged battery lasts about 2.5 hours.
2
Install remote control battery
Step 1 Open the battery compartment.
Step 2 Insert 1 CR2025 battery with correct polarity (+/-) as indicated.
Step 3 Close the battery compartment.
CR2025
1
2
Quick Start Guide
slide selector to the
DC IN 12V
CR2025
Play discs
3
Step 1 Lift the display panel.
Step 2 Switch the
compartment.
socket
• (For the fi rst time) Remove the protective card.
Step 3 Insert a disc with the printed side facing up.
Step 4 Push the lid down to close the disc compartment.
Disc starts to play automatically. If not, press
If a menu appears, select an item and then press
4
Connect a TV
On the DVD Player,
Step 1 Connect the black end of the supplied AV cable to the
OUT
socket.
On the TV,
Step 1 Connect the white end to the left audio input socket and the
red end to the right audio input socket.
Step 2 Connect the yellow end to the video input socket.
OPEN
slide selector to the right to open the disc
TV
VI E
PET717_93_QSG_V2.0
OK
or 2; .
OK
to start play.
AV
I
I
I
Advertisement
Need help?
Do you have a question about the PET717/93 and is the answer not in the manual?
Questions and answers