hit counter script
Philips 298P4QJEB/00 Service Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Monitor
  5. 298P4QJEB/00
  6. Service manual

Philips 298P4QJEB/00 Service Manual

29" lcd color monitor chassis: meridian 3
Hide thumbs
Table of Contents

Advertisement

Quick Links

29 LCD Color Monitor
298X4QJAB/00
Service
298X4QJAB/93
Service
298X4QJAB/27
Service
298X4QJAB/96
298X4QJAB/75
298X4QJAB/69
298X4QJAB/11
Description
Table of Contents......................................................1
Revision List.............................................................2
Important Safety Notice............................................3
1. Monitor Specifications............................................5
2. LCD Monitor Description........................................7
3. Operation Instructions............................................8
3.1General Instructions........................................8
3.2 Control Buttons..........................................8
3.3 OSD Menu......................................................9
4. Input/output Specification..................................10
4.1 Input Signal Connector.......................................10
4.2 Resolution & Preset Modes.................................11
4.3 Pixel Defect Policy.......................................12
4.4 Failure Mode of Panel...................................14
5. Block Diagram...............................................15
5.1 Scaler Board.....................................................15
5.2 Power Board.....................................................16
6. Schematic Diagram.............................................. 17
6.1 Scaler Board..............................................17
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE
CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN
SERVICING ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES.
CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING
REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES
Copyright 2013 Philips Consumer Lifestyle
298P4QJEB/00
298P4QJEB/96
298P4QJEB/69
298P4QAJEB/93
298P4QJEB/93
298P4QJEB/01
298P4QJEB/94
298P4QJEB/75
298P4QJEB/27
298P4QJEB/57
Page
SAFETY NOTICE
Subject to modification
Description
6.2 Power Board.......................................................32
6.3 Key Board..................................................34
6.4 Head Phone Jack Board.........................35
7. PCB Layout..................................................36
7.1 Scaler Board...............................................36
7.2 Power Board...............................................37
7.3 Key Board..................................................38
7.4 Head Phone Jack Board.........................38
8. Wiring Diagram.............................................39
9. Scaler Board Overview...................................40
10. Mechanical Instructions.................................41
11. Repair Flow Chart........................................45
12. ISP Instructions..................................................49
13. DDC Instructions................................................55
15. Monitor Exploded View.......................................91
16. Recommended & Spare Parts List......................93
17. General Product Specification.........................97
Oct. 18.2013
K
Chassis: Meridian 3
Page

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 298P4QJEB/00 and is the answer not in the manual?

Questions and answers

Related Manuals for Philips 298P4QJEB/00

Summary of Contents for Philips 298P4QJEB/00

  • Page 1: Table Of Contents

    CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES. CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES Copyright 2013 Philips Consumer Lifestyle Subject to modification Oct. 18.2013...

  • Page 2: Revision List

    Meridian 3 Revision List Version Release Date Revision History Feb.7, 2013 Initial release, Draft Version Feb.22, 2013 Add CTN model 298P4QJEB/69 & 298P4QJEB/93 Mar.1, 2013 Add CTN model 298P4QJEB/94 Mar.8, 2013 Add CTN model 298P4QJEB/75 & 298X4QJAB/00 Apr.3, 2013 Add CTN model 298X4QJAB/93 Apr.12, 2013 Add CTN model 298P4QJEB/27 &...

  • Page 3: Important Safety Notice

    Meridian 3 Important Safety Notice This electronic user guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor. The...
  • Page 4 Meridian 3 IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging”...

  • Page 5: Monitor Specifications

    Meridian 3 1. Monitor Specifications...
  • Page 6 Meridian 3 Note: 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the latest...

  • Page 7: Lcd Monitor Description

    Meridian 3 2. LCD Monitor Description The LCD monitor will contain a scaler board, a power board, a head phone jack board and a key board. The scaler board houses the flat panel control logic, brightness control logic and DDC. The power board will provide AC to DC inverter voltage to drive the backlight of panel and the scaler board chips each voltage.

  • Page 8: Operation Instructions

    Meridian 3 3. Operating Instructions Connecting to your PC 3.1 General Instructions Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor. By changing these setting, the picture can be adjusted to your personal preference.

  • Page 9: Osd Menu

    3.3 OSD Menu On-screen Display (OSD) is feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.

  • Page 10: Input/Output Specification

    Meridian 3 4. Input/ Output Specification 4.1 Input Signal Connector Ground Ground DVI Connector AUX_CH (P) Pin No. Signal Name Ground T.M.D.S. data2- AUX_CH (N) T.M.D.S. data2+ Hot Plug Detect T.M.D.S. data2 shield Return DP_PWR No Connect DP_PWR No Connect DDC clock DDC data HDMI Connector...

  • Page 11: Resolution & Preset Modes

    Meridian 3 4.2 Resolution & Preset Modes Maximum Resolution 2560 x 1080 at 60 Hz (digital input) Recommended Resolution 2560 x 1080 at 60 Hz (digital input) Power Management Definition Note: This data is subject to change without notice.

  • Page 12: Pixel Defect Policy

    Meridian 3 4.3 Pixel Defect Policy defects and several types of sub pixel defects within Philips strives to deliver the highest quality products. each category. We use some of the industry's most advanced Bright Dot Defects manufacturing processes and practice stringent quality Bright dot defects appear as pixels or sub pixels that control.
  • Page 13 In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.

  • Page 14: Failure Mode Of Panel

    Meridian 3 4.4 Failure Mode Of Panel Quick reference for failure mode of LCD panel this page presents problems that could be made by LCD panel. It is not necessary to repair circuit board. Simply follow the mechanical Polarizer has bubbles instruction on this manual to eliminate failure by replace LCD panel.
  • Page 25 30K 1/16W...
  • Page 26 D403 RLZ5.6B C423 D401 RLZ5.6B C422 D402 RLZ5.6B C421 C420 NC/0.1UF 16V C419 NC/0.1UF 16V D404 NC/RLZ5.6B...
  • Page 31 USB3.0 USB3.0 USB3.0 USB3.0 USB3.0...

  • Page 36: Scaler Board

    Meridian 3 7. PCB Layout 7.1 Scaler Board (715G5497M01001005K) Remark: Parts position can be searched by using FIND function in PDF. CN5581 C4284 F7732 C7728 C7789 C7724 FB7736 AC17 D4263 R4262 C7790 C4283 C4276 CN410 R7739 C7791 L4262 C4272 C4269 R4278 C5584 CN7735...

  • Page 37: Power Board

    Meridian 3 7.2 Power Board (715G5622P01001001R) Remark: Parts position can be searched by using FIND function in PDF. GND4 GND3 C809 C817 J924 D950 J914 C945 D973 FB905 L951 C975 CN805 C973 CN804 CN806 C946 J920 T902 J912 CN902 L980 C953 FB801 C954...

  • Page 38: Key Board

    Meridian 3 7.3 Key Board (715G5620K01000004K) Remark: Parts position can be searched by using FIND function in PDF. LED001 CN001 SW001 Remark: Parts position can be searched by using FIND function in PDF. 7.4 Head Phone Jack Board (715G5462T01000004Q) Remark: Parts position can be searched by using FIND function in PDF. U682 CN683 CN681...

  • Page 40: Scaler Board Overview

    Meridian 3 9. Scaler Board Overview FFC Cable Only for 298P4 DC-DC Scaler IC Audio DVI EEPROM HDMI EEPROM HDMI EEPROM Flash ROM Flash ROM...

  • Page 41: Mechanical Instructions

    Meridian 3 10. Mechanical Instructions 298P4 open all the latches along the edge of the Rear Cover. Remove the key board and disconnect all the connectors to separate the rear cover from the panel. Step 1: Remove the STAND ASSY 1.
  • Page 42 Meridian 3 Remove the screws and disconnect all the The Power board connectors to remove the boards. Step 3: Separate the DECO bezel and the panel 1. Remove all the screws to separate middle frame from the panel. The middle frame The Key board The Phone jack board The Deco bezel...
  • Page 43 Meridian 3 298X4 the edge of the Rear Cover. Remove the key board and disconnect all the connectors to separate the rear cover from the panel. Step 1: Remove the STAND and BASE Remove the screws and remove the STAND and BASE.
  • Page 44 Meridian 3 Step 3: Separate the DECO bezel and the panel 2. Remove all the screws to separate middle frame from the panel. The middle frame The Key board The Phone jack board The Deco bezel The Scaler board The panel The Power board...

  • Page 45: Repair Flow Chart

    Meridian 3 11. Repair Flow Chart 1. No Power No power Check power cable is Re-plug the power cable tightened? Check Power “On/Off” Turn on the Power “On/Off” switch is “On”? Check the LED Check the AC power indicator is OK? Replace the power board and check connections Replace main board and check connections Replace key board and check connections...
  • Page 46 Meridian 3 Video (Power LED White) No Video (Power LED White) Press the power Replace the main board button is OK? Replace the power The end board and connection Replace the main The end board and connection Check the FFC cable Replace the FFC cable or panel or panel...
  • Page 47 Meridian 3 3. DIM DIM (image overlap, focus or flicker) Reset in factory mode The end Set to the optimal The end frequency, select the recommended frequency Readjust the phase and pixel The end clock in the user mode Pull out signal cable and Check the signal cable check “Self Test Feature and the PC...
  • Page 48 Meridian 3 4. Color is not optimal Color is not optimal Color shift Miss color Reset the factory mode Replace the signal cable In the user mode, set the “color settings” until customer satisfy The end Pull out the signal cable and check the screen color display is normal? Replace the signal cable or PC...

  • Page 49: Isp Instructions

    Meridian 3 12. ISP Instruction Note: Take the 272P4 SOP for example (the 298P4 SOP are almost the same as 272P4’s) When do the parts, need the tools as follow: Monitor ISP tool: Driver Driver New F/W 12.1. Connect the ISP board, PC and monitor as follow:...
  • Page 50 Meridian 3 12.2 Install the LPT driver. 1. Double- clicks the icon to install “NET Framework 2.0 Redistributable Package (x86)”.
  • Page 51 Meridian 3 2. Double- clicks the icon to install “Visual C++ 2008 SP1 Redistributable Package (x86)”. 3. The way to factory menu: Press “MENU” and “+” keys synchronously (The rightmost and leftmost keys in the touch keyboard), and DC on. When the screen lights, release the two keys and press “MENU” again to open factory menu.
  • Page 52 Meridian 3 12.3 Run ISP tool. 1. Double- clicks the icon to run it. 2. Click “File” and “Open” to open the file of F/W. 3. Load the correct F/W.
  • Page 53 Meridian 3 4. Click “Yes” to start programming. 5. After about 2minutes, there will pop up message as below figure which promotes the upgrade success.
  • Page 54 Meridian 3 12.4 Check the firmware version: 1. The way to open factory menu. (1)Connect source to monitor and AC on. (2)The way to factory menu: Press “MENU” and “+” keys synchronously (The rightmost and leftmost keys in the touch keyboard), and DC on. When the screen lights, release the two keys and press “MENU” again to open factory menu.

  • Page 55: Ddc Instructions

    Meridian 3 13. DDC Instruction Note: Take the 272P4 EDID SOP for example (the 298P4 SOP are almost the same as 272P4’s) General DDC Data Re-programming In case the main EEPROM with Software DDC which store all factory settings were replaced because a defect repaired monitor’...
  • Page 56 HDMI2 EDID WH2.dat HDMI EDID WH.dat Display EDID DP.dat 2. Copy these five files to one folder named as PHILIPS 272P4 which must contains “config.ini” file. 3. Copy PHILIPS 272P4 to DDC folder and put DDC and ISP tool together.
  • Page 57 Meridian 3 13.4 Run the ISP tool 1. Double-click the icon to open the tool. 2. Select the EDID folder.
  • Page 58 Meridian 3 3. Load EDID successful. 4. Tick the “Only connect DVI” and “write SN”, then click “Lock” and “Debug Information”.
  • Page 59 Meridian 3 5. Type in the 14 digit S/N. Notes: the SN fourth digit must is A. 6. Start to writing. Click “write EDID” to start writing. When The green “PASS” appear, the process is finished.
  • Page 60 Meridian 3 7. Check the S/N in monitor user menu. Press “MENU” and select “Information”—“SN”, you can check the SN. 13.5 Troubleshooting. Can’t write! (1) AC on the monitor and turn on it.(Restart the monitor) (2)Take apart the monitor and connect the 7pin of EEPROM to GND to diable write protection then write EDID one by one.
  • Page 61 Meridian 3 298P4Q EDID Analog 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F ----------------------------------------------- 00| 00 FF FF FF FF FF FF 00 41 0C BE C0 01 01 01 01 10| 16 16 01 03 6E 43 1C 78 2A 8E 05 AD 4F 33 B0 26 20| 0D 50 54 BD 4B 00 D1 00 D1 C0 81 80 95 0F 95 00 30| B3 00 81 C0 A9 40 28 3C 80 A0 70 B0 23 40 30 20 40| 36 00 A1 1C 21 00 00 1A 00 00 00 FF 00 0A 20 20...
  • Page 62 1680 x 1050 @ 60Hz 1280 x 720 @ 60Hz 1600 x 1200 @ 60Hz <-Detailed Timing Descriptions:-> FC (Monitor Name) : Philips 298P4 FD (Monitor Limits): Min. V. rate: 56 Hz Max. V. rate: 76 Hz Min. H. rate: 30 KHz Max.
  • Page 63 Meridian 3 Digital 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F ----------------------------------------------- 00| 00 FF FF FF FF FF FF 00 41 0C BE C0 01 01 01 01 10| 1B 16 01 03 80 43 1C 78 2A 8E 05 AD 4F 33 B0 26 20| 0D 50 54 BD 4B 00 D1 00 D1 C0 81 80 95 0F 95 00 30| B3 00 81 C0 A9 40 CD 46 00 A0 A0 38 1F 40 30 20 40| 3A 00 A1 1C 21 00 00 1A 00 00 00 FF 00 0A 20 20...
  • Page 64 1680 x 1050 @ 60Hz 1280 x 720 @ 60Hz 1600 x 1200 @ 60Hz <-Detailed Timing Descriptions:-> FC (Monitor Name) : Philips 298P4 FD (Monitor Limits): Min. V. rate: 50 Hz Max. V. rate: 76 Hz Min. H. rate: 30 KHz Max.
  • Page 65 Meridian 3 Display port 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F --------------------Block 0-------------------- 00| 00 FF FF FF FF FF FF 00 41 0C BE C0 00 00 00 00 10| 03 17 01 04 A5 43 1C 78 3A 8E 05 AD 4F 33 B0 26 20| 0D 50 54 BD 4B 00 D1 00 D1 C0 81 80 95 0F 95 00 30| B3 00 81 C0 A9 40 CD 46 00 A0 A0 38 1F 40 30 20 40| 3A 00 A1 1C 21 00 00 1A 00 00 00 FF 00 0A 20 20...
  • Page 66 1600 x 1200 @ 60Hz <-Detailed Timing Descriptions:-> Detailed Timing : 2560x1080 @ 60Hz FF (Monitor SN) : FC (Monitor Name) : Philips 298P4 FD (Monitor Limits): Min. V. rate: 23 Hz Max. V. rate: 76 Hz Min. H. rate: 15 KHz Max.
  • Page 67 Meridian 3 Extension Flag : 01 Block0 Checksum : CF ------------------------------------------------------- Block 1: Extended Block Type: CEA 861B Detailed Timing Blocks start at Byte: 18 DTV Underscan YES DTV Basic Audio YES YCbCr (4:4:4) YES YCbCr (4:2:2) YES <-Video Short Block Description:-> 640 x 480 P 59.94/60Hz 4:3 720 x 480 P 59.94/60Hz 4:3 720 x 480 P 59.94/60Hz 16:9...
  • Page 68 Meridian 3 Detailed Timing Descriptions: 1920x1080 @ 60Hz H Image Size: 673 mm V Image Size: 284 mm Pixel Clock: 148 Hz Refreshed Mode: Non-Interlaced Detailed Timing Descriptions: 1920x1200 @ 60Hz H Image Size: 673 mm V Image Size: 284 mm Pixel Clock: 154 Hz Refreshed Mode: Non-Interlaced Detailed Timing Descriptions: 1280x720 @ 50Hz...
  • Page 69 Meridian 3 EDID Structure Version/Revision: 01 03 <-Vendor/Product Identification:-> ID Manufacturer Name: PHL ID Product Code: C0BE ID Serial Number: No Use Week of Manufacture: Year of Manufacture: 2013 <-Basic Display Parameters/Features:-> Video i/p definition: Digital Max. H. Image Size : 67cm Max.
  • Page 70 1600 x 1200 @ 60Hz <-Detailed Timing Descriptions:-> Detailed Timing : 2560x1080 @ 60Hz Detailed Timing : 1920x1080 @ 60Hz FC (Monitor Name) : Philips 298P4 FD (Monitor Limits): Min. V. rate: 23 Hz Max. V. rate: 76 Hz Min. H. rate: 15 KHz Max.
  • Page 71 Meridian 3 1920 x 1080 P 59.94/60Hz 16:9 720 x 576 P 50Hz 4:3 720 x 576 P 50Hz 16:9 1280 x 720 P 50Hz 16:9 1920 x 1080 I 50Hz 16:9 720(1440) x 576 I 50Hz 4:3 720(1440) x 576 I 50Hz 16:9 1920 x 1080 P 50Hz 16:9 1280 x 720 P 59.94/60Hz 16:9 <-Audio Short Block Description:->...
  • Page 72 Meridian 3 HDMI 2 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F --------------------Block 0-------------------- 00| 00 FF FF FF FF FF FF 00 41 0C BE C0 01 01 01 01 10| 03 17 01 03 80 43 1C 78 2A 8E 05 AD 4F 33 B0 26 20| 0D 50 54 BD 4B 00 D1 00 D1 C0 81 80 95 0F 95 00 30| B3 00 81 C0 A9 40 CD 46 00 A0 A0 38 1F 40 30 20 40| 3A 00 A1 1C 21 00 00 1A 02 3A 80 18 71 38 2D 40...
  • Page 73 1600 x 1200 @ 60Hz <-Detailed Timing Descriptions:-> Detailed Timing : 2560x1080 @ 60Hz Detailed Timing : 1920x1080 @ 60Hz FC (Monitor Name) : Philips 298P4 FD (Monitor Limits): Min. V. rate: 23 Hz Max. V. rate: 76 Hz Min. H. rate: 15 KHz Max.
  • Page 74 Meridian 3 Extension Flag : 01 Block0 Checksum : E5 ------------------------------------------------------- Block 1: Extended Block Type: CEA 861B Detailed Timing Blocks start at Byte: 24 DTV Underscan NO DTV Basic Audio YES YCbCr (4:4:4) YES YCbCr (4:2:2) YES <-Video Short Block Description:-> 640 x 480 P 59.94/60Hz 4:3 720 x 480 P 59.94/60Hz 4:3 720 x 480 P 59.94/60Hz 16:9...
  • Page 75 Meridian 3 <-Detailed Timing Descriptions: -> Detailed Timing Descriptions: 1920x1080 @ 50Hz H Image Size: 673 mm V Image Size: 284 mm Pixel Clock: 148 Hz Refreshed Mode: Non-Interlaced Detailed Timing Descriptions: 1920x540 @ 60Hz H Image Size: 673 mm V Image Size: 284 mm Pixel Clock: 74 Hz Refreshed Mode: Interlaced...
  • Page 76 Meridian 3 298X4Q EDID Digital 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F ----------------------------------------------- 00| 00 FF FF FF FF FF FF 00 41 0C BD C0 01 01 01 01 10| 1B 16 01 03 80 43 1C 78 2A 8E 05 AD 4F 33 B0 26 20| 0D 50 54 BD 4B 00 D1 00 D1 C0 81 80 95 0F 95 00 30| B3 00 81 C0 A9 40 CD 46 00 A0 A0 38 1F 40 30 20 40| 3A 00 A1 1C 21 00 00 1A 00 00 00 FF 00 0A 20 20...
  • Page 77 1680 x 1050 @ 60Hz 1280 x 720 @ 60Hz 1600 x 1200 @ 60Hz <-Detailed Timing Descriptions:-> FC (Monitor Name) : Philips 298X4 FD (Monitor Limits): Min. V. rate: 50 Hz Max. V. rate: 76 Hz Min. H. rate: 30 KHz Max.
  • Page 78 Meridian 3 Display port 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F --------------------Block 0-------------------- 00| 00 FF FF FF FF FF FF 00 41 0C BD C0 00 00 00 00 10| 03 17 01 04 A5 43 1C 78 3A 8E 05 AD 4F 33 B0 26 20| 0D 50 54 BD 4B 00 D1 00 D1 C0 81 80 95 0F 95 00 30| B3 00 81 C0 A9 40 CD 46 00 A0 A0 38 1F 40 30 20 40| 3A 00 A1 1C 21 00 00 1A 00 00 00 FF 00 0A 20 20...
  • Page 79 1600 x 1200 @ 60Hz <-Detailed Timing Descriptions:-> Detailed Timing : 2560x1080 @ 60Hz FF (Monitor SN) : FC (Monitor Name) : Philips 298X4 FD (Monitor Limits): Min. V. rate: 23 Hz Max. V. rate: 76 Hz Min. H. rate: 15 KHz Max.
  • Page 80 Meridian 3 Extension Flag : 01 Block0 Checksum : C8 ------------------------------------------------------- Block 1: Extended Block Type: CEA 861B Detailed Timing Blocks start at Byte: 18 DTV Underscan YES DTV Basic Audio YES YCbCr (4:4:4) YES YCbCr (4:2:2) YES <-Video Short Block Description:-> 640 x 480 P 59.94/60Hz 4:3 720 x 480 P 59.94/60Hz 4:3 720 x 480 P 59.94/60Hz 16:9...
  • Page 81 Meridian 3 Detailed Timing Descriptions: 1920x1080 @ 60Hz H Image Size: 673 mm V Image Size: 284 mm Pixel Clock: 148 Hz Refreshed Mode: Non-Interlaced Detailed Timing Descriptions: 1920x1200 @ 60Hz H Image Size: 673 mm V Image Size: 284 mm Pixel Clock: 154 Hz Refreshed Mode: Non-Interlaced Detailed Timing Descriptions: 1280x720 @ 50Hz...
  • Page 82 Meridian 3 ------------------------------------------------------- Block 0: EDID Structure Version/Revision: 01 03 <-Vendor/Product Identification:-> ID Manufacturer Name: PHL ID Product Code: C0BD ID Serial Number: No Use Week of Manufacture: Year of Manufacture: 2013 <-Basic Display Parameters/Features:-> Video i/p definition: Digital Max. H. Image Size : 67cm Max.
  • Page 83 1600 x 1200 @ 60Hz <-Detailed Timing Descriptions:-> Detailed Timing : 2560x1080 @ 60Hz Detailed Timing : 1920x1080 @ 60Hz FC (Monitor Name) : Philips 298X4 FD (Monitor Limits): Min. V. rate: 23 Hz Max. V. rate: 76 Hz Min. H. rate: 15 KHz Max.
  • Page 84 Meridian 3 1920 x 1080 I 59.94/60Hz 16:9 720(1440) x 480 I 59.94/60Hz 4:3 720(1440) x 480 I 59.94/60Hz 16:9 1920 x 1080 P 59.94/60Hz 16:9 720 x 576 P 50Hz 4:3 720 x 576 P 50Hz 16:9 1280 x 720 P 50Hz 16:9 1920 x 1080 I 50Hz 16:9 720(1440) x 576 I 50Hz 4:3 720(1440) x 576 I 50Hz 16:9...
  • Page 85 Meridian 3 Pixel Clock: 27 Hz Refreshed Mode: Non-Interlaced Block1 Checksum : 4A HDMI 2 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F --------------------Block 0-------------------- 00| 00 FF FF FF FF FF FF 00 41 0C BD C0 01 01 01 01 10| 03 17 01 03 80 43 1C 78 2A 8E 05 AD 4F 33 B0 26 20| 0D 50 54 BD 4B 00 D1 00 D1 C0 81 80 95 0F 95 00 30| B3 00 81 C0 A9 40 CD 46 00 A0 A0 38 1F 40 30 20...
  • Page 86 1680 x 1050 @ 60Hz 1280 x 720 @ 60Hz 1600 x 1200 @ 60Hz <-Detailed Timing Descriptions:-> Detailed Timing : 2560x1080 @ 60Hz Detailed Timing : 1920x1080 @ 60Hz FC (Monitor Name) : Philips 298X4 FD (Monitor Limits): Min. V. rate: 23 Hz...
  • Page 87 Meridian 3 Max. V. rate: 76 Hz Min. H. rate: 15 KHz Max. H. rate: 99 KHz Max. P Clock: 210 MHz Extension Flag : 01 Block0 Checksum : DE ------------------------------------------------------- Block 1: Extended Block Type: CEA 861B Detailed Timing Blocks start at Byte: 24 DTV Underscan NO DTV Basic Audio YES YCbCr (4:4:4) YES...
  • Page 88 Meridian 3 Audio Supported: 48KHz 44KHz 32KHz Audio Bit Rate: 24bit 20bit 16bit <-Speaker Allocation:-> Speaker Allocation: FL/FR <-Detailed Timing Descriptions: -> Detailed Timing Descriptions: 1920x1080 @ 50Hz H Image Size: 673 mm V Image Size: 284 mm Pixel Clock: 148 Hz Refreshed Mode: Non-Interlaced Detailed Timing Descriptions: 1920x540 @ 60Hz H Image Size: 673 mm...

  • Page 89: White Balance, Luminance Adjustment

    Meridian 3 14. White Balance, Luminance Adjustment 1. Apparatuses and program: analyzer CA-210, PC, tool, FGA adjustment program (Philips LEDFGA.DDCI), Pattern generator. 2. Equipment installation: a. Connect analyzer CA-210 to PC by USB connector, install drive program CA-SDK Ver4.00 for CA-210 and restart PC after finish installing b.
  • Page 90 Meridian 3 5. Color Temp confirmation Connect the signal to the monitor, the monitor displays white-picture, use CA-210 to measure the Color Temp of the screen center and select the OSD to make sure whether the Color Temps accord with the SPEC. CIE coordinates (x,y) 11500K...

  • Page 93: Recommended & Spare Parts List

    16. Recommended & Spare Parts List Note: Take the 298P4QJEB/00 BOM for example. The following information of initial version BOM are only for reference of repair, not place the order as the basis and are subject to change without notice. Please base on RSPL or Service BOM (http://cs.tpv.com.cn) , thank you!
  • Page 94 Meridian 3 U7781 056G4LVCG08 PP IC 74LVC1G08GW TSSOP-5 U706 356G0563412 LDO UP0113CHA3-33 1.5A 3.3V TO-252 5.5V U4262 356G0563419 DC/DC APW7089KAI-TRG 4A 26V SOP-8P U7733 356G0659088002 USB VL811-Q8P QFN88 U7738 356G0667022 POWER SWITCH APL3510BKI-TRG SOP-8 150C U951 056G 139 9 IC EL817M(X) PHOTOCOUPLER DIP-4 U902 056G 379121 IC STR- A6069H DIP-8...
  • Page 95 Meridian 3 U401 056G 562A45 SCALER STDP9320 HSBGA-521 U701 056G 563345 DC/DC AT1528P11U 2A SOP-8 U707 056G 563397 LDO AP2127K-ADJTRG1 0.3A Adj SOT23-5 U708 056G 563X01 LDO G9661-25ADJF11U 2A 300mv drop SOP-8 U4501 056G 615144 DRAM NT5CB64M16DP-CF 1Gb BGA-96 U601 056G 616112 AUDIO APA2606NAI-TRG 2.8W SSOP-24P U504...

  • Page 96: General Product Specification

    5 Horizontal Frequency Range 15~99 KHz 6 Vertical Frequency Range 23~76Hz 7 Monitor Name (13 characters max.) Philips 298P4 1 User visible strings on .inf file Philips 298X4 (29inch Wide LCD MONITOR 298X4) 2 Manufacturer ID ( EDID data) 3 Product ID, "xxxx" 4 codes...
  • Page 97 Scaler should be capable of below items. 1) Scaler must support color engine for Image enhancement feature (SmartImage) 2) Scaler must have enough memory to support PerfecTune feature and Philips OSD 3) Scaler must support SmartContras,20M:1 DCR preferred 4) VGA signal Auto adjustment: Monitor automatically adjusts and optimizes resolution and frequency based on input signal defined by “Source”...
  • Page 98 Meridian 3 Allows source to interrogate capabilities of sink. I²C signaling with 100 kHz clock. E-EDID data structure according to EIA/CEA-861D and VESA Enhanced EDID. Content protection: According to High-Definition Content Protection (HDCP) Specification 1.10. HDMI video input should support timing defined in CEA 861-D specification with extended EDID blocks Video Timing Support Format...
  • Page 99 Meridian 3 Interface D-Sub Cable Length : 1.8 M +/- 50 mm Fix with monitor when packing, with transplant pin protective cover. Connector type : D-Sub male with DDC2B pin assignments. Blue connector thumb-operated jack screws Pin assignments: PIN No. SIGNAL Green/ SOG Blue...
  • Page 100 100 Meridian 3 No Connect No Connect T.M.D.S clock shield T.M.D.S. clock+ T.M.D.S. clock- DP CABLE The input signals are applied to the display through DP cable. Length : 1.8 M +/- 50 mm Connector type : DP male with DDC-2B pin assignments White connector thumb-operated jackscrews With transplant pin protective cover.
  • Page 101 Meridian 3 101 TMDS Clock+ TMDS Clock Shield TMDS Clock– Reserved (HDMI 1.0-1.3c), HEC Data- (Optional, HDMI 1.4+ with Ethernet) SCL (I²C Serial Clock for DDC) SDA (I²C Serial Data Line for DDC) DDC/CEC/HEC Ground +5 V Power (max 50 mA) Hot Plug Detect (All versions) and HEC Data+ (Optional, HDMI 1.4+ with Ethernet) Timing requirement...
  • Page 102 102 Meridian 3 POWER ON LOGO Power On Logo: Power On Show up Philips logo 3 seconds Change to input signal. This picture is reference only. The official drawing will send out by PM. Audio Selection Stand-alone – On: Isolate video and audio control input Stand-alone –...
  • Page 103 Meridian 3 103 Power On time include resolution show time 13s (Max.) b. DVI mode / HDMI / DP mode :, Normal node to Power saving mode: 19/s(Max.) DVI Power Saving to Normal mode:9s (Max.) DP Power Saving to Normal mode: 9s (Max.) timing change : 7/s (Max.) Source change :5/s(Max.) Power On time include resolution show time...
  • Page 104 104 Meridian 3 No Audio and USB HUB connect. Note 5 : With Audio and USB HUB connect. VGA Display identification In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability DVI Display identification In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0) use DDC-2B, DDC/CI, and EDID V1.3 DP Display identification DDC /CI Support and Smart Manage/Control...
  • Page 105 Meridian 3 105 3.18.4 Audio Amplifier The amplifier shall provide two channels of audio up to 2.0 Watts per channel from 100 Hz to 20 kHz, based upon an audio signal input of 1.0V RMS per channel. 3.18.5 Volume Control For monitors with a manual volume control, the direction (at the bottom) of the bezel volume control is “-“...
  • Page 106 106 Meridian 3 +- 30 degree (for IR LED ) SENSOR key control, Adjust detection distances (0~4 scales), default is 3 , tolerance : (±10cm) 0 : 0FF 1 : 90 cm tolerance : (±10cm) 2 : 100 cm tolerance : (±10cm) 3 : 110 cm tolerance : (±10cm) 4 : >130 cm...
  • Page 107 Meridian 3 107 Lower down backlight Backlight & LCD panel PowerSensor No ACTION brightness shutdown Power Saving The following set-up’s will be supported: User 2 Monitor 2 Top view Monitor 1 User 1 Fig. 2: 2 monitors standing back to back. The monitors may influence each other.
  • Page 108 108 Meridian 3 Factory requirements Factory requirements are taken into account. It needs to do calibration to make sure the same detection distance. Service requirements Service requirements are taken into account. In the factory mode, it needs to reserve the max. distance adjustment value to adjust distance ranges.
  • Page 109 Meridian 3 109 The 1931 CIE Chromaticity (color triangle) diagram (x ,y) coordinate for the screen center should be: Product specification CIE coordinates (x,y) 11500K x = 0.270 ± 0.02 PerfecTune II y = 0.281 ± 0.02 9300K x = 0.283 ± 0.02 PerfecTune II y = 0.297 ±...
  • Page 110 Base / Pedestal to be Flame Retardant UL 94-HB. All major plastic parts (bezel, back cover) need to be molded from same resin. Plastic resin type selection should be referred to “plastic-Philips Pool monitor”. Texture/Glossing of housing The texture area and texture no should follow Philips make-up sheet.
  • Page 111 Regulatory label / Carton label should follow Philips requirement. China RoHS label Detail document refer to Philips Engineering Reference Book. Product dimension / Weight ( Refer to Philips approved SHT 191/SHT560 ) Unit dimension : Packed unit dimension: Net weight...
  • Page 112 3. Cold Drop test (for design reference) Un-package test 1. Sine vibration (operating) 2. Half sine shock test (non operation) Pallet / Container loading (Refer to Philips approved SHT 560) Transportation standards refer to TYE-M0002 ,UAN-D1534 and UAW-0309. Air shipment - Sea container 20'(pallet/slip sheet)
  • Page 113 According to MIL-STD-1916D Control III level AQL: NA (Please also refer to annual quality agreement) Customer acceptance criteria: UAW0377/00 PHILIPS’ FLAT PANEL MONITORS PIXEL DEFECT POLICY Philips’ Flat Panel Monitors Pixel Defect Policy BRIGHT DOT DEFECTS ACCEPTABLE LEVEL MODEL 298P4...
  • Page 114 114 Meridian 3 Fig 1: Measurement locations of Brightness Uniformity Fig 2: Cross talk pattern Gray level 46 (64 Gray level)
  • Page 115 Worldwide Regulatory EMC Requirements Supplier DVT EMI test result must be submitted prior to DVT samples delivery, and PVT EMI test result must be submitted again prior to PVT samples delivery, which also has to meet Philips' immunity testing specification. RoHS Restriction on the use of certain hazardous substances.
  • Page 116 4. When the HV circuitry is operating properly there is no possibility of an x- tube must be the same type as the original, including suffix letter, or a Philips radiation problem. High voltage should always be kept at the manufacturer's approved type.

This manual is also suitable for:

298p4qjeb/69298p4qjeb/94298p4qjeb/93298p4qjeb/75298p4qjeb/27298p4qjeb/57 ... Show all

Table of Contents