Page 1
W770 W770 Wireless PC Link Micro Need help? Call us! Return Philips representatives are ready to help you with your Warranty any questions about your new product. We can guide you Registration Card within 10 days through Connections, First-time Setup, or any of the Features.
Page 2
Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to. • Once your Philips purchase is registered, • So complete and return the Warranty you’ r e eligible to receive all the privileges Registration Card enclosed with your of owning a Philips product.
Page 3
As a member of the Philips “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.
Page 4
Canada English: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Français: Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le Règlement sur le Brouillage Radioélectrique édicté...
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Use only with the cart, stand, tripod, bracket, or table specified Keep these instructions. by the manufacturer or sold with Heed all warnings. the apparatus.When a cart is used, use caution when moving Follow all instructions. the cart/apparatus combination Do not use this apparatus near to avoid injury from tip-over.
Contents Technical data _________________ 10 Basic functions Switching on, switching to standby ____ 22 Demonstration mode ______________ 22 General information Setting the clock __________________ 23 Supplied accessories _______________ 10 Displaying the clock _______________ 23 Environmental information __________ 11 Dim mode ______________________ 23 Maintenance _____________________ 11 Volume control ___________________ 24 Disc handling ____________________ 11...
Page 9
Contents The set complies with the FCC-Rules, Playback features Part 15 and with 21 CFR 1040.10. Album and track name display (on Operation is subject to the following MP3-CDs only) __________________ 28 two conditions: SHUFFLE and REPEAT _____________ 28 1.This device may not cause harmful Repeating a track, a disc or a interference, and program _____________________ 28...
Technical data / General information Technical data Tuner Subject to modification without notice. Wave range FM ________________ 87.5–108 MHz General 100 kHz Grid AC Power ______________ 120V / 60 Hz AM ________________ 530–1700 kHz Power consumption Active ______________________ 45 W 10 kHz Grid Standby ___________________ <...
General information Environmental information Disc handling All redundant packing material has been To take a disc out of omitted.We have done our utmost to its box easily, press the make the packaging easily separable into center spindle while lifting three mono materials: cardboard (box), it.
Remote control Remote control use Remote control keys TUNER PC LINK CD 3 CD 1 CD 2 CD 4 CD 5 Open the battery compartment of the ALBUM BROWSE remote control and insert 2 alkaline batteries, type AA (R06, UM-3). Close the battery compartment.
Page 13
Remote control DISPLAY switches the unit to (Eco Power) standby CD: displays the album and track name on an MP3-CD Source buttons PC LINK: switches between displaying the elapsed playing time, the track name and selects the CD changer the file name TUNER selects the tuner and toggles between the SHUFFLE...
Controls and connections ≤£™ ¡ & On the back On the front SPEAKERS 6 Ω L/R DISC 1, DISC 2, DISC 3, DISC 4, connect to the supplied speakers DISC 5 selects a disc tray and starts playback AC MAINS ~ After all other connections have been OPEN/CLOSE made, connect the power cord to the...
Page 15
Controls and connections ¢ sensor for the infrared remote control Note: Always point the remote control – selects the next track towards this sensor. – searches forward (press and hold the button) within the current track display TUNER: tunes to a higher radio frequency source control lights (press and hold the button for more than when a source is active the respective...
Installation Warning: Fit the plug of the loop antenna to Never make or change connections AM ANTENNA as shown below. with the power supply switched on. Speaker connections Use the supplied speakers only. Using other speakers can damage the unit or F M A N T E N A M A N T E N the sound quality will be negatively...
Installation Installing a PC server Power See chapter “Quick installation of the The type plate is located on the rear of wireless connection to a PC server”. the unit. Check whether the power voltage as Connecting an additional shown on the type plate corresponds to appliance your local power voltage.
Wireless PC link Notes:The installation process also includes PC system requirements the installation of the Musicmatch Media – Windows 98SE/ME/2000/XP software. Please use this software for your – Pentium Class 300MHz processor or PC LINK application. Musicmatch Media higher software is supposed to support the wireless –...
Musicmatch for the wireless PC link and it instruction on the PC side. can also be used as an independent PC music player. Firmware upgrade Occasionally, Philips releases new software (firmware) for your unit. Please visit our website www.philips.com/support for future possible software upgrade.
Wireless PC link PC LINK function How to display the current server PC LINK enables you to playback your name music collection from the PC via the unit. To display the current server name press PC LINK A while the display shows Before playback can be started the connection to an installed network/server neither a server name nor a network...
Wireless PC link Press 4 or ¢ repeatedly to select a Track navigation and playback track within the selected item. For easie finding of a desired track you can The name of the selected item (e.g. first select following BROWSE modes: ALBUM, album name) and the name of the ARTIST, GENRE, PLAYLIST and TRACKS.
Basic functions Switching on, switching to Demonstration mode standby The demonstration mode displays various features of the unit. TUNER PC LINK CD 3 CD 1 CD 2 CD 5 CD 4 ALBUM BROWSE To switch the unit to an active mode press one of the source keys on the remote To activate the demonstration mode Ç...
Basic functions Setting the clock Displaying the clock This function shows the set time. In any mode (except in clock or timer ALBUM setting) press CLOCK on the remote BROWSE control repeatedly to switch between the clock display and the normal display. Note: If you press a button during the clock display that changes the display, the information related to the pressed button will...
Basic functions Volume control Sound control In order to reach an optimal sound, you can Volume adjustment adjust only one of the following sound controls at a time: DSC or VEC. TUNER PC LINK Digital Sound Control enables you to CD 1 CD 2 CD 3...
Playback Playable discs Loading discs For playback on this unit you can use the following discs (logos shown below): – All pre-recorded audio CDs Press OPEN/CLOSE on the unit. – All finalised audio CDR and CD and SELECT DISC are displayed. CDRW discs Press one of the disc keys (DISC 1, DISC 2, DISC 3, DISC 4, or DISC 5) on the unit to...
Playback Press É Å to start playback. Playing discs Playback starts from the first track of the Direct selection and playback of one current disc. All loaded discs will be particular disc played. If one of the trays is empty, the next available disc will be selected.
Playback features Selecting and searching Additional selecting and searching (on MP3-CDs only) Selecting a track when playback is stopped Selecting an album when playback is stopped ALBUM BROWSE ALBUM BROWSE Press 4 or ¢ repeatedly to skip to the Press ALBUM 5 or ALBUM ∞ repeatedly to desired track number.
Playback features Playback starts in the selected mode. Album and track name display (on MP3-CDs only) To return to normal playback, press REPEAT on the remote control repeatedly until OFF is displayed. Notes: Not all REPEAT modes are possible during SHUFFLE or while playing a program.
Playback features Press 4 or ¢ repeatedly to select the Programming track numbers desired track. Programming tracks is possible when playback is stopped.You can select up to 99 MP3-CD only: Press ALBUM 5 or ALBUM ∞ to find the tracks (also MP3 tracks) and store them in the memory.
Tuner Tuning to radio stations Storing radio stations You can store up to 40 radio stations in the TUNER PC LINK memory, starting from FM and followed by AM wavebands. Stations can be stored automatically or manually, or by using the CD 1 CD 2 CD 3...
Tuner Storing by automatic programming Storing by manual programming You can start the automatic programming You can use manual programming to store from a selected preset number. If no preset your favorite radio stations only. number is selected, automatic programming Tune to your desired radio station (see starts at preset number 1 and all your “Tuning to radio stations”).
Timer You can select different timer functions Press SOURCE on the unit repeatedly or press CD,TUNER or PC LINK A on the which will be activated at a preset time. Make sure the clock is set before remote control to select the source you using one of these features.
Timer Sleep timer Activating or deactivating the timer You can set a certain period of time after which the unit will switch to standby. REPEAT PROGRAM SHUFFLE DISPLAY REPEAT PROGRAM SHUFFLE DISPLAY SLEEP CLOCK TIMER TIMER ON/OFF SLEEP CLOCK TIMER TIMER ON/OFF RDS/NEWS Press TIMER ON/OFF on the remote...
Troubleshooting WARNING Under no circumstances should you try to repair the unit yourself as this will invalidate the guarantee. Do not open the unit as there is a risk of electric shock. If a fault occurs, first check the points listed before taking the unit for repair.
Troubleshooting Problem Solution Poor radio reception – Direct the antenna for optimum reception. – Make sure the antenna is not positioned near a radiation source such as a TV,VCR, etc. NO DISC indication or – Make sure the disc is not scratched or dirty. Replace or clean disc cannot be played the disc.
MC W770 Philips audio system and placing the wireless USB adapter as close as possible to the front side of the MC W770. Start the installation again.
Page 37
I have lost my supplied wireless You can order the wireless USB adapter USB adapter, what can I do? at your local Philips Service organization. The MC W770 PC link mode will also work with most other WiFi certified wireless adapters.
Page 38
Philips audio system MC W770? audio system MC W770. Can I have more than one Philips Yes, you can add more than one Philips audio system MC W770 to connect audio system MC W770 to connect to to my PC? your PC.
Page 39
Frequently asked questions I want to use the PC link function The MC W770 is meant to be used with the in a wireless network which is supplied wireless adapter. However, it is already installed.What can I do? possible to use the MC W770 together with most other WiFi certified wireless adapters as well as in infrastructure mode networks using Access Point.
Frequently asked questions My PC Link has already worked It is possible that in your area or close nicely, but since recently this is neighborhood a new network has been no longer the case. installed. Use the installation CD to switch to another channel.
PUERTO RICO, OR U.S. VIRGIN ISLANDS... only for the original warranty period.When the warranty Take the product to a Philips factory service center (see on the product expires, the warranty on all replaced and enclosed list) or authorized service center for repair.When repaired parts also expires.
Need help?
Do you have a question about the MCW770 and is the answer not in the manual?
Questions and answers