IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide. Note: • HDBaseT™ is available for the PowerLite L510U/L610U/L610W/L615U only. • The wireless LAN module accessory is available for the PowerLite L400U/L500W/L510U/L610/L610W only.
Turning the Projector On Displaying a Test Pattern Note: See the online User’s Guide for 1. Turn on your computer or image instructions on displaying a test pattern from source. the remote control using the Settings menu. 2. Press the power button on the 1.
If your image is uneven on the sides, you can use the projector’s distortion Note: Lens shift is not available on the correction features, such as PowerLite L400U/L500W. See the online User’s Guide for instructions on adjusting H/V-Keystone, Quick Corner , and Arc ®...
For more information about using the projector, you can view or download the Make sure the status light on the • online manuals from the Epson website, projector is blue and not flashing. as described below. Make sure the cables are connected •...
Remote Control Map Switch image sources Turn the projector on or off Select a source Display settings for device in HDMI port Automatically adjust Select color modes computer image Change the aspect ratio Hold down and use numeric buttons to enter numbers Hold down and use numeric buttons to select which projector Open projector menus...
See “Where to Get Help” inside this card for more information. EPSON, PowerLite, Quick Corner, and Instant Off are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.
Need help?
Do you have a question about the PowerLite L400U and is the answer not in the manual?
Questions and answers