hit counter script
Sanyo PJLINK PLC-WM4500 Owner's Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Projector
  5. PLC-WM4500
  6. Owner's manual
Sanyo PJLINK PLC-WM4500 Owner's Manual

Sanyo PJLINK PLC-WM4500 Owner's Manual

Multimedia projector
Hide thumbs Also See for PJLINK PLC-WM4500:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, User Manual
Multimedia Projector
PLC-WM4500
MODEL
PLC-WM4500L
Owner's Manual
Network Supported
Refer to the Owner's Manual below for
details about network function.
£ Network Set-up and Operation
◊
◊ Projection lens is optional.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PJLINK PLC-WM4500 and is the answer not in the manual?

Questions and answers

Related Manuals for Sanyo PJLINK PLC-WM4500

Summary of Contents for Sanyo PJLINK PLC-WM4500

  • Page 1 Multimedia Projector PLC-WM4500 MODEL PLC-WM4500L Owner’s Manual Network Supported Refer to the Owner's Manual below for details about network function. £ Network Set-up and Operation ◊ ◊ Projection lens is optional.

  • Page 2: Features And Design

    This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology. Functionally Rich This projector has many useful functions such...

  • Page 3: Table Of Contents

    Safety Instructions . . . . . . . . . . . . . . . . . 5 Air Circulation Installing the Projector in Proper Directions Moving the Projector Cautions in Handling the Projector Compliance .

  • Page 4: To The Owner

    SIDE and TOP 0.7’(20cm) 1.5’(50cm) – If the projector is unused for an extended time, unplug the 20cm projector from the power outlet. – Do not project the same image for a long time. The afterimage may remain on the LCD panels by the characteristic of panel.

  • Page 5: Safety Instructions

    The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.

  • Page 6: Air Circulation

    Remove any dirt or dust that has accumulated on the projector. If the projector reaches a time set in the timer setting, a Filter warning icon (Fig. 1) appears on the screen and WARNING FILTER indicator on the top panel lights up (see below), indicating that the filter replacement is necessary.

  • Page 7: Installing The Projector In Proper Directions

    Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal plane.

  • Page 8: Moving The Projector

    – When carrying the projector, use a suitable carrying case. – Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.

  • Page 9: Compliance

    Telephone No. : (818)998-7322 The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada: AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).

  • Page 10: Part Names And Functions

    Infrared Remote Receiver (Back) ⑪ ⑫ Terminals and Connectors Filter Cover & Air Intake Vent ⑬ ⑭ Power Cord Connector ⑮ Hand Grip ⑯ Security Chain Hook Note: This is not a handle for carrying the projector. Do not carry the projector with this hook. ⑰ Adjustable Feet...

  • Page 11: Rear Terminal

    Connect the LAN cable (refer to the owner’s manual of “Network Set-up and Operation”). ③ CONTROL PORT CONNECTOR When controlling the projector with RS-232C, connect the control equipment to this connector with the serial control cable. (p.19) ④ ANALOG OUT TERMINAL This terminal can be used to output the incoming analog RGB signal from INPUT 1-3 terminal to the other monitor (pp.19-20).

  • Page 12: Side Control And Indicators

    Enter the focus, zoom, and lens shift adjustment mode (p.27). ⑦ INPUT button Select an input source (pp.33-35). ⑧ POWER indicator – Light green while the projector is in stand-by mode. – Light green during operations. Side Control and Indicators Indicators (on the top panel) ⑦...

  • Page 13: Remote Control

    ⑭ ⑫ ⑪ ⑩ MOUSE POINTER button ⑩ Move a pointer of the projector or a pointer for wireless mouse operation (p.32). SELECT button ⑪ – Execute the selected item (p.25). – Expand or compress the image in the Digital zoom mode (p.43).
  • Page 14 Part Names and Functions ⑮ ⑯ ⑰ ⑱ ⑲ ㉑ ⑳ D .ZOOM button ⑮ Select the Digital zoom +/- mode and resize the image (p.43). INPUT 1-  buttons ⑯ Select an input source (INPUT 1 – INPUT 3) (pp.33-35).

  • Page 15: Remote Control Battery Installation

    16.4’ (5 m) and 60 degrees in front, back and top of the projector. Infrared Remote Receivers are provided in front, back and top of of the projector. You can conveniently use all of the receivers (pp. 10, 11, 59). Note:...

  • Page 16: Remote Control Code

    Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 58.

  • Page 17: Installation

    For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. (for PLC-WM4500) PNote: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image. • All measurements are approximate and may vary from the actual sizes. 35.4’(10.8 m) 23.6’ (7.2 m) 11.8’ (3.6 m) 4.5'(1.4 m) 100” 40” 63” Screen Size 40”...

  • Page 18: Lens Installation

    Attaching the lens to the projector Remove the lens mount cover. Fit the lens to the projector by aligning the red dot on the lens with the red dot of the projector. Slowly turn the lens clockwise until it clicks. Make sure that the lens is fully inserted to the projector.

  • Page 19: Connecting To A Computer (Digital And Analog Rgb)

    Monitor Output Serial out Serial Cross cable cable G B R H/V V CONTROL PORT Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. = Cables not supplied with this projector.) ⁄ • Serial Cross cable ⁄ • USB cable ⁄ Monitor Output Monitor Input • cable...

  • Page 20: Connecting To Video Equipment (Video, S-Video, Hdmi)

    Component Composite Video Output Video (Y, Pb/Cb, Cr/Pr) cable Video Y - Pb/Cb - Pr/Cr = Cables not supplied with this projector.) ⁄ Analog Out Signal Table ⁄ ⁄ Input Terminal Monitor Out RGB (PC analog) D-sub15 RGB (SCART)

  • Page 21: Connecting For Audio Signal

    Connecting for Audio Signal Cables used for connection • Audio cable ⁄ Audio Output Audio cable (stereo) Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. = Cables not supplied with this projector.) ⁄ External Audio Equipment Audio Output (R) (L) Audio Input Audio Audio cable cable (stereo)

  • Page 22: Connecting The Ac Power Cord

    NOTE ON THE POWER CORD AC power cord must meet the requirements of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If the supplied AC power cord does not match your AC outlet, contact your sales dealer.

  • Page 23: Basic Operation

    After the countdown, the input source that was selected the last time and the Lamp control status icon (see page 57) appear on the screen. If the projector is locked with a PIN code, PIN code input dialog box will appear. Note: • When the Logo select function is set to Off, the logo will not be...

  • Page 24: Turning Off The Projector

    What is PIN code? PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector. A PIN code consists of a four-digit number. Refer to the PIN code lock function in the Setting Menu on pages 61-62 for locking operation of the projector with your PIN code.

  • Page 25: How To Operate The On-Screen Menu

    How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual.

  • Page 26: Menu Bar

    Used to adjust the volume or mute the sound (p.28). á Setting Used to set the projector’s operating configurations (pp.51-64). à Information Display the input source information: Input, H-sync freq ., V-sync freq ., Screen, Language, Lamp status, Lamp counter, Filter counter, Power management, Key lock, PIN code lock, Simple mode, Remote control, and SERIAL NO .

  • Page 27: Operating With Projector Control

    INFO . button Information display can be used to confirm the current operating condition of the projector and the signal being projected through the projector. Press the INFO. button on the remote control to display the information window on the screen. To hide the information window, press the INFO.

  • Page 28: Sound Adjustment

    Basic Operation Direct Operation Volume Press the VOLUME+/– buttons on the side control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Mute Press the MUTE (Point q) button on the remote control to select On to temporarily turn off the sound.

  • Page 29: Operating With Remote Control

    Operating with Remote Control Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. AUTO PC button Press the AUTO PC button on the remote control to operate the Auto PC adj.
  • Page 30 Basic Operation MOUSE POINTER button Move the pointer on the screen with this button. POINTER button Press POINTER button on the remote control to display the Pointer on the screen. (pp.32, 60) P-TIMER button Press the P-TIMER button on the remote control to operate the Count up/Count down function.

  • Page 31: Keystone Correction

    If a projected picture has keystone distortion, correct the image with Keystone adjustment. It is not available when On-Screen menu is displayed. Press the KEYSTONE button on the remote control. The keystone dialog box appears. Correct keystone distortion by pressing the Point pq buttons on the remote control.

  • Page 32: Pointer Function

    Basic Operation You can move the Pointer of the projector with the remote control to emphasize a part of the projected image. Press the POINTER button to activate the Pointer function. Use the MOUSE POINTER button to move the Pointer.

  • Page 33: Input Selection

    Side Control/Remote Control Operation Side Control INPUT button * Only the Input button function is set Mode 1 in the Setting menu, the INPUT button is used for switching input source. (p.51) The input source changes each time you press the INPUT button on the side control or the remote control as follows: Input 1 ®...

  • Page 34: Computer Input Source Selection

    Input Selection Menu Operation Press the MENU button to display the On-Screen Menu. Use the Point pq buttons to select Input and then press the Point u or the SELECT button. Use the Point pq buttons to select the desired input and then press the Point u button to access the submenu items.

  • Page 35: Video Input Source Selection

    Video Input Source Selection Menu Operation Press the MENU button to display the On-Screen Menu. Use the Point pq buttons to select Input and then press the Point u or the SELECT button. Use the Point pq buttons to select the desired input and then press the Point u button to access the submenu items.

  • Page 36: Computer Input

    This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 81-82)

  • Page 37: Auto Pc Adjustment

    To store the adjusted parameters . The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.36). See “Manual PC Adjustment” on pages 38-39.

  • Page 38: Manual Pc Adjustment

    Computer Input Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.

  • Page 39: Mode Free

    SELECT button. Move the highlight to one of the Modes 1 to 10 in which you want to store, and then press the SELECT button. PNote: • Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i , 1080i or 1080p is selected in the PC System Menu (p.36). • When input computer signal to the projector, PC adjust function will become available. Computer Input Mode free This mode has stored parameters.

  • Page 40: Image Level Selection

    SELECT button. Dynamic For viewing pictures in a bright room. Standard Normal picture level preset on the projector. Real Picture level with improved halftone for graphics. Image 1–10 User preset picture adjustment in the Image adjust Menu. (pp.41-42) Image Level Selection or the SELECT button.

  • Page 41: Image Adjustment

    Press the MENU button to display the On-Screen Menu. Use the Point buttons to select Image adjust and then press the Point the SELECT Use the Point buttons to select the desired item and then press the SELECT button to display the adjustment dialog box.

  • Page 42: Screen Size Adjustment

    True Provide the image in its original size. When the original image size is larger than the screen size (1280 x 800), the projector enters to the panning mode automatically. Use the Point pqt u buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.
  • Page 43 Custom adj . Adjust the screen scale and position manually with this function. Press the Point u button or the SELECT button at Custom adj . and Custom adj . is displayed on the screen, you can use the Point pq buttons to choose the item you want to adjust.
  • Page 44 When this function is set to On, the picture will be top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be left/right reversed.

  • Page 45: Video Input

    When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4 .4/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4 .4, PAL-M, and PAL-N. y, Pb/Cb, Pr/Cr jacks...

  • Page 46: Image Level Selection

    Use the Point pq buttons to select the desired item and then press the SELECT button. Dynamic For viewing pictures in a bright room. Standard Normal picture level preset on the projector. Natural Naturally picture level preset on the projector. Cinema Picture level adjusted with fine tone.

  • Page 47: Image Adjustment

    Press the MENU button to display the On-Screen Menu. Use the Point pq buttons to select Image adjust and then press the Point u or the SELECT button. Use the Point pq buttons select the desired item and then press the SELECT button to display the adjustment dialog box.

  • Page 48: Noise Reduction

    Press the Point t u buttons to change the progressive scan mode. Off ... Progressive scan mode is Off. On ... Progressive scan mode is On . Film ... For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the SELECT button.

  • Page 49: Screen Size Adjustment

    Press the MENU button to display the On-Screen Menu. Use the Point pq buttons to select Screen and then press the Point u or the SELECT button. Use the Point buttons to select the desired item and then press the SELECT button. Normal Provide the image within a screen size keeping its original aspect ratio.
  • Page 50 When this function is set to On, the picture will be top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be left/right reversed.

  • Page 51: Setting

    This projector has a Setting menu that allows you to set up the other various functions described below. Press the MENU button to display the On-Screen Menu. Press the Point pq buttons to select Setting and press the Point u or the SELECT button to access the submenu items.
  • Page 52 The factory default setting is in this option. Countdown Off ... Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.
  • Page 53 After capturing the projected image, go to the Logo select function and set it to User. Then the captured image will be displayed the next time you turn on the projector. To cancel the capture function, select yes in the "Quit?" confirmation box.
  • Page 54 Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector. If you entered an incorrect Logo PIN code, Logo PIN code and the number (⁄⁄⁄⁄) will turn red for a moment.
  • Page 55 Picture in Picture This function is used to project two images simultaneously by placing a separate small sub screen within or next to the main screen. Use the Point pq buttons to select Picture in Picture and then press the SELECT button to display a dialog box. You can also display the dialog box by pressing and holding the PIP button on the remote control for more than 3 seconds.
  • Page 56 Setting Frame lock Set the Frame Lock to Main picture or Sub picture. Reset Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at yes. Mode free Delete the data stored in the Mode and return to Free. Use the Point pq buttons to select Mode free and press the SELECT button to show the Where to free? dialog box.

  • Page 57: Lamp Control

    It is recommended to use Eco 2 when using the projector continuously over a long period of time. The fan noise becomes louder in Eco 2 than in Eco 1. Select the suitable mode for the used environment.
  • Page 58 (Code 1) and the other seven codes (Code  to Code ). The same code should be set on both the projector and the remote control. For example, operating the projector in Code 7, the remote control code also must be switched to Code 7.
  • Page 59 Note: Factory default is Ready: 5 Min. Standby mode This function is available when operating the projector via network. Network ... Supply the power to the network function even after turning off the projector. You can turn on/off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off.
  • Page 60 Setting Direct on When this function is set to On, the projector will be automatically turned on just by connecting the AC power cord to the wall outlet. Note: Be sure to turn off the projector properly (see “Turning Off the Projector” on page 24). If the projector is turned off in the incorrect sequence, the Direct on function does not work properly. Pointer You can emphasize a part of the projected image with this function.

  • Page 61: Key Lock And Pin Code Lock

    On1 ..Enter the PIN code every time turning on the projector. On ..Enter the PIN code to operate the projector once the power cord is disconnected; as long as the AC power cord is connected, the projector can be operated without a PIN code.
  • Page 62 WHEN yOU HAVE CHANGED THE PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO . MEMO ON PAGE 6, AND KEEP IT SECURELy . IF yOU FORGET yOUR PIN CODE, THE PROjECTOR CAN NO LONGER BE STARTED . Enter a PIN code...
  • Page 63 Closed caption Closed caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains closed caption, you can turn on the feature and switch the channels. Press the Point select Off, CC1, CC, CC or CC4. If the closed caption is not clear, you can change the text from Color to White.

  • Page 64: Filter Counter

    Show the total accumulated time of the filter cartridge. Timer ... To set a timer, when the projector reaches the time, the Filter warning icon (Fig. 1) appears on the screen and the total accumulated time turns red, indicating that the filter cartridge replacement is necessary.

  • Page 65: Maintenance And Care

    Maintenance and Care Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector.

  • Page 66: Replacing The Filter Cartridge

    Maintenance and Care Turn off the projector, and unplug the AC power cord from the AC outlet. First, clean up the dust on the projector and around the air vents. Press downwards on the filter cover to release the latch and open the filter cover.

  • Page 67: Resetting The Filter Counter

    Resetting the Filter Counter Be sure to reset the Filter counter after cleaning or replacing the filter. Press the MENU button to display the On-Screen Menu. Use the Point buttons to select Setting and then press the Point or the SELECT button. Use the Point buttons to select Filter counter and then press the SELECT button.

  • Page 68: Lamp Replacement

    Maintenance and Care When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is depending on the lamp mode.

  • Page 69: Lamp Handling Precautions

    Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service.

  • Page 70: Cleaning The Projection Lens

    Do not use any flammable solvents or air sprays on the projector and in its vicinity. The explosion or fire hazard may occur even after the AC power cord is unplugged because the temperature inside the projector is extremely high due to the lamps.

  • Page 71: Warning Indicators

    The WARNING indicators show the state of the function which protects the projector. Check the state of the WARNING indicators and the POWER indicator to take proper maintenance. The projector is shut down and the WARNING TEMP . indicator is blinking red .

  • Page 72: Appendix

    A problem may be noticed with your graphics controller rather than with the projector. (When you reconnect the projector, be sure to turn the computer and monitor off before you turn on the projector. Turn on equipment in the order of the projector and computer.)
  • Page 73 – Projecting from excessive slant angle to the screen may cause keystone distortion and partial imperfect focus. – Make sure the projection screen is at least 4.5’ (1.4 m) away from the projector. – Check if Contrast or Brightness is adjusted properly. (See pages 41, 47) –...
  • Page 74 High voltages are used to operate this projector . Do not attempt to open the cabinet . If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.

  • Page 75: Menu Tree

    Computer Input/ HDMI Inpiut/Video Input Input Input Input 1 Input 2 Input 3 Computer Input System ⁄ System displayed in the System Menu varies depending on the input signal. Image adjust Image adjust Contrast Brightness Color temp. Green Blue Offset Sharpness Gamma Reset...

  • Page 76: Image Adjust

    Appendix Screen Screen Video Input System System PNote: The Menu display varies depending on the input signal. Normal Image adjust Full Wide(16:9) Zoom True Custom Scale H / V Custom adj. H & V On/Off Position H / V Common Reset Digital zoom + Digital zoom - Keystone Store Reset Ceiling...
  • Page 77 Capture Yes/No Off/On Logo PIN code lock Logo PIN code change Normal/Enhanced HDMI/AUDIO 1 Auto/Normal/Eco 1/Eco 2 Mode 1/Mode 2 On/Off Code 1~Code 8 Eco/Network Start/Stop/Restart Reset Exit Projector Remote control Off/On1/On2 Closed caption Off/CC1/CC2/CC3/CC4 Color White/Color Off/600H/900H/1200H/1500H/1800H/2000H Yes/No Appendix...

  • Page 78: Indicators And Projector Condition

    P-MANAGEMENT FILTER REPLACE STAND-BY blue orange orange The projector is off. (The AC power cord is unplugged.) The projector is in stand-by mode. Press the ON/ ⁄ ⁄ STAND-BY button to turn on the projector. ⁄ ⁄ The projector is operating normally.
  • Page 79 The lamp cannot light up. (The lamp has been cooled down enough and the projector is in stand-by mode and ready to be turned on with the ON/STAND-BY button.) The lamp has been used overtime. Replace the lamp immediately.
  • Page 80 Note: Fig.1 will not appear when the Display function is set to Off (p.52), during “Freeze” (p.30), or No show (p.29). The filter cartridge is not installed in the projector. Check the filter compartment to see if the filter cartridge is installed in the projector. When the filter cartridge is installed and the indicators continue to light and blink, read the column below.

  • Page 81: Compatible Computer Specifications

    Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 140 MHz of Dot Clock. When the input signal is Analog, refer to the chart below. ON-SCREEN RESOLUTION H-Freq .
  • Page 82 1600x1200 D-WUXGA 2 1920 x 1200 D-WSXGA+ 1 1680 x 1050 D-WXGA+ 1 1440x900 PNote: •Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed. •Specifications are subject to change without notice. •You might be able to project images even when signals other than above are inputted, however the functions of the projector could be limited. •Depending on your PC settings, the digital signals of your PC may not be projected correctly. In such a case, confirm your PC settings. •When you project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn on your PC. Be sure to follow this procedure, otherwise an image may not be projected on the screen. If an image is not projected correctly, restart your PC. •Do not disconnect the cable while the projector is running. If the cable has been disconnected and then reconnected, an image may not be correctly projected. The CE Mark is a Directive conformity mark of the European Community (EC). Licensed under USP 5,717,422 USP 6,816,141 Pixelworks ICs used.

  • Page 83: Technical Specifications

    3.5 oz (99 g) (including batteries) Lens Cap (for PLC-WM4500) Lens Mount Cover (for PLC-WM4500L) Lens Antitheft screw * VGA Cable Appendix * Contact the dealer where you purchased the projector or the service center about the Lens Antitheft Screw.

  • Page 84: Optional Parts

    Short Fixed Lens SCART-VGA Cable The lens of this projector can be replaced with other optional lens. This feature enables you to use the projector for wide variety of uses. For installation and replacement of the lens, always contact the sales dealer. The projector lens must be installed or replaced by well-trained sales or service engineers.

  • Page 85: Configurations Of Terminals

    Configurations of Terminals ANALOG/ MONITOR OUT (Mini D-sub 15 pin) HDMI (19 Pin Type A) 1 3 5 7 9 11 13 15 17 19 USB CONNECTOR (Series B) CONTROL PORT CONNECTOR (D-sub 9 pin) Input Red Input +5V Power Green Input Ground (Vert.sync.) Blue Input...

  • Page 86: Pin Code Number Memo

    Appendix Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service center. PIN Code Lock No .

  • Page 87: Dimensions

    Appendix Dimensions Unit: inch (mm) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 16.39(416.2) 3.80(96.6) 4.34(110.3) 19.27(489.5) 7.70(195.5) 6.89(175.0) 6.25(158.8) 5.91(150.0) 3.78(96.0) 6.46(164.0)

  • Page 88: List Of Picture In Picture

    <Picture in Picture is disabled when;> • Inputting signal formats: SXGA20, WUXGA 1, WUXGA 2, WSXGA+ 1, WXGA+2, UXGA 1, UXGA 2, UXGA 3, UXGA4, D-1080p This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port. Operation Connect a RS-232C serial cross cable to CONTROL PORT on the projector and serial port on the PC.
  • Page 89 Functional Execution Command Format The command is sent from PC to the projector with the format below; 'C' [Command] 'CR' Command: two characters (refer to the command table below. -The projector decodes the command and returns the 'ACK' with the format below;...
  • Page 90 'Character string' with the format below; Command Function Status Read Temperature Read The tables on page 89 and 90 show the typical command lists for controlling the projector. Please consult your local dealer for further information of other commands. Projector Projector status Return...
  • Page 91 KP8AL...

This manual is also suitable for:

Plc-wm4500/l - 4500 lumensPlc-wm500lPlc-wm4500l

Table of Contents