Advertisement
Available languages
Available languages
Quick Links
Features
ENGLISH
IMPORTANT
SAFETY
A
INSTRUCTIONS
When using an electric appliance, basic safety
precautions should always be followed, including
B
the following:
Read all instructions before using this
appliance.
C
DANGER
To reduce the risk of electric shock:
D
1. Do not reach for a corded Groomer that has
fallen into water. Unplug immediately.
2. Use Groomer only in dry condition. Do
not use Groomer while bathing or in a
shower.
3. Do not submerge Groomer in water.
E
4. Do not place or store Groomer where it can
fall or be pulled into a tub or sink. Do not
F
M
place or drop Groomer into water or other
liquid while plugged in.
G
5. Always unplug the Groomer from the
H
electrical outlet immediately after use,
I
except when Groomer is (re)charging.
J
6. Unplug and remove power supply cord from
Groomer before cleaning.
WARNING
To reduce the risk of burns, fire, electric
shock or injury to persons:
1. Close supervision is necessary when this
Groomer is used by, on, or near children or
invalids.
2. Use this Groomer for its intended household
use as described in this manual. Do not use
A Mini Foil Shaver
attachments not recommended by Philips
B Nose/Ear Hair Trimmer
Electronics North America Corporation.
C PrecisionTrimmer
3. Never operate this Groomer if it has a
D Full Size Metal Guard Trimmer
damaged cord or charging plug, if it is not
E Handle
working properly, if it has been dropped or
F On/Off Button
damaged, or dropped into water. For
assistance call 1-800-243-3050.
G Turbo Button
4. Keep the Groomer, cord, charging plug and
H Turbo Status Indicator
any attachments away from heated surfaces.
I
Battery Status Indicator
5. Never drop or insert any object into any
J
Storage Pouch
opening.
K Small Appliance Plug
6. Do not operate, charge, clean or plug in
L Adapter
Groomer outdoors or where aerosol
M Cleaning Brush
(spray) products are being used or where
oxygen is being administered.
N Stubble Comb
7. Always check foil, cutters, cutting unit, combs
O Beard & Moustache Comb
and trimmers before using the Groomer. Do
P Hair Clipping Comb
not use the Groomer if foil, cutters, cutting
Full 2-Year Warranty
unit, combs and trimmers are damaged, as
45-Day Money-Back Guarantee
injury may occur.
8. Always attach plug to Groomer first,
then outlet. To disconnect, turn Groomer
The tap symbol on the
"OFF", then remove plug from outlet.
groomer indicates that the
9. To prevent possible damage to the cord, do
groomer can be rinsed under
not wrap cord around the Groomer.
running tap water.
10. Never put the Groomer in direct sunlight or
store at a temperature above 140°F.
11. The Groomer. is for use on human hair only.
Put It To The Test
Do not use the Groomer for any other pur-
pose.
Like many new products, your Philips Norelco
12. Only use the power plug and other
Multigroom Grooming Kit may take a little getting
accessories supplied with the Groomer.
used to. If you are using an electric Groomer for
the first time, or if you've been using a different
SAVE THESE
brand, take the time to acquaint yourself with your
new Grooming Kit.
INSTRUCTIONS
Your Multigroom Grooming Kit features head and
facial styling with a powerful battery combined
IMPORTANT: The power plug contains
with all the attachments to make trimming facial
a transformer. Do not cut off the power
hairs or hair clipping goof proof.
plug to replace it with another plug as this
will cause a hazardous condition.
Throw your scissors away and put your new
Multigroom Grooming Kit to the test. We
IMPORTANT: YOUR GROOMER
guarantee precise, professional results or Philips
CONTAINS NICKEL METAL HYDRIDE
Norelco will refund you the full purchase price as
RECHARGEABLE BATTERIES.
long as the request is received within 45 days of
purchase.
See Battery Removal Instructions.
Registration
Congratulations on your purchase and welcome
to Philips Norelco!
To fully benefit from the support that Philips
Norelco offers, register your product at
www.norelco.com/register
12_QG3360.indd 1
Cordless Trimming
1
2
3
1
Charge according to directions. Unplug
Groomer from outlet and remove cord.
1
P
2
2
Press ON/OFF button ON to begin trimming.
/
-
/
in
3
If the battery runs low (approximately 10
1
25
8
32
4
5
6
3-20mm
minutes of grooming time left) the Battery
2
Status Indicator will light up orange indicating
Groomer needs to be (re)charged.
3 - 20
O
3 - 20
1
4
Connect appliance plug to Groomer. A quick
charge for 5 minutes gives you 5 minutes of
3
/
-
23
/
in
64
32
7
8
9
trimming time.
1-18mm
2
5
If the charge runs out while trimming, simply
3 - 20
1
connect cord provided to Groomer and
outlet to continue trimming.
N
3
10
11
12
Hair Clipping
/
-
/
in
3
15
64
32
1-12mm
Use this Groomer for its intended household
w
use as described in this manual.
L
Make sure that the Groomer is fully charged
w
before you start clipping.
Before you start clipping, make sure that the
w
13
14
15
head of the person whose hair you are cutting
K
2
1
is at the same level as your chest so that all
parts of his/her head are clearly visible and
2
within easy reach.
1
Make sure hair is clean and dry.
w
Before you begin, comb the hair in the
w
16
17
18
direction of growth (fig. 2).
To achieve optimal clipping results, always move
1
w
the appliance slowly through the hair against
the direction of hair growth.
2
Do not move the Groomer too fast. Make smooth
19
20
21
and gentle movements.
Clipping with hair clipping comb
1
Put the trimmer on Groomer handle
(1) and turn clockwise (2) (fig. 3).
22
23
24
2
Slide the hair clipping comb into the guiding
grooves on both sides of Groomer handle
(fig. 4).
3
Press the Hair Length Setting Selector (1)
and slide the comb to the desired setting (2)
25
(fig. 5).
The hair clipping comb cuts hair to a length of
1/8 - 25/32in / 3-20mm.
4
The setting selected is shown on the back
of the Groomer.
When you are clipping for the first time, start at
To Charge/Recharge
the maximum clipping length setting (25/32in /
20mm) to familiarize yourself with the appliance
Fully charge Groomer before using for the first
w
and prevent accidentally trimming hairs too short.
time or after non-use for a long period of time.
As you become familiar with the settings, adjust
Charging, recharging or using Groomer at
w
the Hair Length Setting Selector to desired trim-
temperatures below 40˚F or higher than 95˚F
ming length. Selector will 'click' into position at
adversely affects lifespan of the battery.
each setting.
If the Groomer is subjected to a major change
w
in temperature, pressure or humidity, let the
5
Turn the Grooomer ON (fig. 6).
Groomer acclimatize for 30 minutes before
using.
6
Make sure that the flat part of the comb is
always in full contact with the scalp to obtain
1
Be certain Groomer is OFF.
an even result (fig. 7).
2
Connect appliance plug to Groomer and plug
7
Move the appliance slowly over the crown
the adapter into any 120V AC outlet (fig. 1).
from different directions to achieve an even
Use only the cord provided.
result (fig. 8).
An adaptor plug may be necessary for power
w
8
Always move the appliance against the
cord usage in some foreign countries. Use an
attachment plug adaptor of the proper
direction of hair growth. Press lightly.
configuration for the power outlet.
9
Make overlapping passes over the head to
ensure that all hair that should be cut has
3
It will take approximately 1 hour to fully
been cut.
charge the Groomer for a cordless trimming
time of up to 50 minutes.
10
Turn the Groomer off and remove the hair
4
The Battery Status Indicator will blink green
clipping comb often to blow and/or shake
out hair that has accumulated.
to indicate Groomer is charging.
REMEMBER: You must reset the hair length
5
Disconnect the cord and unplug from
w
selector back to your desired setting every
electrical outlet.
time you replace the hair clipping comb on the
appliance.
Turbo Power
Simply press the Turbo Button for a turbo
TIP: Write down the settings you have used to create
w
power boost for fast results and the Turbo
a certain hairstyle as a reminder for future clipping
indicator will light up green. The memory
sessions.
function will remember the last used setting.
Contouring without the hair clipping
comb
Corded Trimming
Groomer does not recharge during corded
Use the Groomer without a comb to clip hair
w
w
very close to the skin (3/64in./1mm) or to
trimming.
contour the neckline and area around the ears.
1
Connect cord provided to Groomer and plug
1
Remove the hair comb by pressing the Hair
Groomer into electrical outlet.
Length Setting Selector (1) and slide the
comb upwards (2). Pull comb off Groomer
2
If battery is completely empty, wait a few
minutes before turning Groomer ON.
(fig. 9).
Be careful when you are clipping without comb
3
Press ON/OFF button ON to begin
attachment as when the Clipper is turned on it
will remove every hair it touches.
trimming.
4
Turn Groomer OFF and unplug.
2
To contour the hairline around the ears,
comb the hair ends over the ears.
3
Tilt the Groomer in such a way that only
Shaving With Foil Shaver
one edge of the cutter blades touches the
Use the narrow mini shaver to shave along con-
hairs when you shape the contours around
toured edges to remove any stubble while creating
the ears (fig. 10).
a smooth, well-defined beard line.
Be careful not to trim too much. The hairline
should be close to the ear.
Before using the mini shaver, always check it
w
for wear and damage. If the mini shaver shows
4
To contour the nape of the neck or
signs of wear or damage, do not use it as injury
sideburns, turn the Groomer and make
may occur. Do not use the mini shaver until it
downward strokes (fig. 11).
has been replaced.
5
Move the Groomer slowly and smoothly
1
Pre-trim the contours desired with the
following the natural hairline.
trimmer or precision trimmer without a
comb attachment.
Trimming your Beard & Moustache
with Beard & Moustache Comb
2
Put the mini shaver on the Groomer handle.
3
Gently press the mini shaver onto the skin
1
Put the trimmer on Groomer handle (1) and
and shave along contoured edges to remove
turn clockwise (2) (fig. 3).
any stubble. Do not press too hard (fig. 17).
2
Slide the beard & moustache comb into
the guiding grooves on both sides of the
Grooming Nose/Ear Hair
handle (fig. 12) .
1
Be certain the Groomer is in the OFF
position.
3
Press the Hair Length Setting Selector (1)
and slide the comb to the desired setting (2)
2
Remove the trimmer by turning counter-
(fig. 13).
clockwise and pulling it off the Groomer
The beard and moustache comb cuts hair to a
handle.
length of 3/64-23/32in / 1-18mm.
3
Put the nose/ear hair trimmer on the
If you are trimming for the first time, start
w
Groomer handle (1) and turn clockwise (2)
by using the comb at the maximum trimming
(fig. 18).
length setting (23/32 in/18mm) to prevent
accidentally trimming hairs too short. As you
Trimming Nose Hair
become familiar with the settings, adjust Hair
Length Setting Selector to desired trimming
Make sure nasal passages are clean.
length. Selector will "click" into position at each
w
setting.
1
Put the nose/ear hair trimmer on the
Groomer handle (1) and turn clockwise (2)
4
Turn the Groomer ON (fig. 8).
(fig. 18).
5
To trim in the most effective way, move
2
Turn the Groomer ON and insert the tip
the Groomer against the direction of hair
of the attachment into one nostril (fig. 19).
growth. Make sure the surface of the comb
always stays in contact with the skin.
CAUTION: Do Not insert the tip more
NOTE: Since all hairs do not grow in the same
than 3/16 in./5mm into your nostril.
direction, you may want to try different trimming
positions (i.e., upwards, downwards, or across).
3
Slowly move the tip in and out while
Practice is best for optimum results.
turning it around at the same time in order
to remove unwanted hair. For best results,
If a lot of hair has accumulated in the comb,
w
make sure the side of the tip is firm against
remove the comb and blow and/or shake the
skin. This will reduce the tickling effect that
hair out of the comb. You can also use the
can occur during trimming of nose hair.
cleaning brush provided to remove
hair from the comb area.
4
Turn off Groomer. Rinse attachment clean
REMEMBER: You must reset the hair length
w
after each use.
selector back to your desired setting every time
you replace the comb on the appliance.
Trimming Ear Hair
The remaining hair length corresponds with
w
the smallest distance between the cutting
Clean outer area of ear and ear canal. Make
w
blade and the spot where the comb is in contact
sure it is free of wax.
with the skin.
Nose/ear hair trimmer should be on the
w
Groomer.
Trimming for 'Stubble' Look
1
Turn the Groomer ON and move the tip
1
Slide the stubble comb into the guiding
softly around the edge of ear to remove hairs
grooves on both sides of groomer handle (fig.
extending beyond the outer ear (fig. 20).
14).
The stubble comb cuts hair to a length of 3/64 -
2
Carefully insert the tip into outer ear canal
15/32in / 1-12mm.
(fig. 21).
Beard Trimming Without
CAUTION: Do not insert the tip further
Beard & Moustache Comb
than 3/16 in./5mm into the ear as this
could cause damage to the eardrum.
Remove comb if you are:
Defining hair lines
3
Turn off Groomer. Rinse attachment clean
w
after each use.
Trimming nape of neck
w
Removing single, unwanted hairs
w
Cleaning
1
Be certain the Groomer is in the OFF
Clean the attachments after each use.
position.
w
Always switch Groomer OFF, unplug
w
2
Remove the comb by pressing the Hair
and remove power supply cord from
Groomer before cleaning.
Length Setting Selector (1) and slide the
comb upwards (2). Pull comb off Groomer .
Do not use compressed air, abrasive cleaning
w
agents, scourers or liquids such as alcohol,
3
Turn the Groomer ON (fig. 8).
benzene, bleach or acetone to clean the
Groomer and attachments.
Never clean, replace or remove Groomer
4
Make well-controlled movements. Touch the
w
hair/skin lightly with the Groomer.
attachments with motor ON.
Do not apply pressure to cutters.
w
Styling/Contouring with Precision
Do not touch cutters with hard objects as this
w
may damage them.
Trimmer
Use the precision trimmer to cut shapes in
During Use:
w
beard hair or scalp hair.
If cut hairs have accumulated in the comb
Be careful when using the precision trimmer as
w
w
it removes every hair it touches.
area, remove hairs by shaking, blowing or using
cleaning brush provided. Remember to adjust
1
Put the precision trimmer on the Groomer
the trimming length back to your selected set-
ting when you replace the comb on Groomer.
handle (1) and turn clockwise (2) (fig. 3).
2
Make careful and controlled movements with
After Each Use:
the precision trimmer.
1
Make sure the Groomer is turned OFF
and disconnected from the electrical outlet.
3
For best results, move the precision trimmer
against the direction of hair growth making
2
Remove any comb or attachment. Rinse
sure it is in full contact with the skin (fig. 16).
under warm water and allow to air dry
thoroughly.
TIP: For a perfect finish, use the mini foil shaver
to make edges and lines of your beard style even
3
Blow and/or shake out any hair that may
smoother (fig. 17).
have accumulated in the comb or attachment.
4
Clean the combs, attachments and appliance
with the supplied cleaning brush or a dry,
soft cloth.
Place the attachment back on the Groomer
5
handle.
Multigroom
Plus
Cleaning the Mini Shaver
1
Separate the top part of the mini shaver
from the bottom part (fig. 22).
2
Blow and/or shake out any hair that may
have accumulated inside the mini shaver
(fig. 23).
3
Clean the top part of the mini shaver under
warm tap water (fig. 24).
The shaving foil is very delicate and should not
w
be handled.
If foil becomes damaged, do not continue using
w
QG3360
the mini shaver. Do not apply pressure to shav-
Rechargeable Cordless/Cord
ing foil.
Electric Groomer
Do not clean the foil with the supplied brush,
w
as this may cause damage.
Always here to help you
4
Shake excess water from mini shaver and
allow to air dry thoroughly.
Do not use a towel to air dry the mini shaver as
damage to the shaving foil could occur.
Full Two-Year Warranty
This Groomer has no other user-serviceable
parts. For assistance call 1-800-243-3050.
Philips Electronics North America Corporation warrants each new Philips
Norelco product, Model QG3360 (except cutters, combs and foil) against
defects in materials or workmanship for a period of two years from the
Storage
date of purchase, and agrees to repair or replace any defective product
without charge.
IMPORTANT: This warranty does not cover damage resulting from
Be sure Groomer is turned OFF. Remove cord
w
accident, misuse or abuse, lack of reasonable care, the affixing of any
from outlet and Groomer before storing in a
attachment not provided with the product or loss of parts or subjecting
the product to any but the specific voltage.* Use of unauthorized
safe, dry location where it will not be crushed,
replacement parts will void this warranty.
banged, or subject to damage.
PHILIPS ELECTRONICS NORTH AMERICA CORPORATION
WILL NOT PAY FOR WARRANTY SERVICE PERFORMED BY
Store the Groomer and attachments in the
w
A NON-AUTHORIZED REPAIR SERVICE AND WILL NOT
pouch to prevent damage.
REIMBURSE THE CONSUMER FOR DAMAGE RESULTING FROM
WARRANTY SERVICE PERFORMED BY A NON-AUTHORIZED
Do not wrap cord around Groomer when
w
REPAIR SERVICE.
storing.
NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL,
Store cord in a safe location where it will not
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
w
In order to obtain warranty service, simply go to www.philips.com/
be cut or damaged.
norelco or call 1-800-243-3050 for assistance. It is suggested that for
Do not place or store Groomer where it can
your protection you return shipments of product by insured mail,
w
insurance prepaid. Damage occurring during shipment is not covered by
fall or be pulled into a tub or sink, water or
this warranty. NOTE: No other warranty, written or oral, is authorized
other liquid.
by Philips Electronics North America Corporation. This warranty gives
you specific legal rights, and you may also have other rights which vary
from state to state. Some states do not allow the exclusion or limitation
Assistance
of incidental or consequential damages, so the above exclusion and
limitations may not apply to you.
*Read enclosed instructions carefully.
For assistance visit our website:
Manufactured for:
Philips Consumer Lifestyle
www.philips.com/support
A Division of Philips Electronics North America Corporation
or call toll free: 1-800-243-3050
P.O. Box 10313, Stamford, CT 06904
This symbol on the product's nameplate means it is
Online information is available 24 hours a day,
listed by Underwriters' Laboratories, Inc.
7 days a week.
Norelco is a Registered Trademark of Philips Electronics
North America Corporation.
Battery Removal
PHILIPS is a Registered Trademark of Koninklijke Philips Electronics N.V.
This Philips Norelco Groomer contains
w
© 2012 Philips Electronics North America Corporation. All Rights Reserved.
rechargeable Nickel Metal Hydride batteries,
which must be disposed of properly (fig. 25).
Batteries may only be removed when
w
Groomer is to be discarded.
For assistance, visit our website:
w
www.philips.com/support or
45-DAY MONEY-
call toll free: 1-800-243-3050.
BACK GUARANTEE
1
Unplug electrical cord from outlet and
Groomer before dismantling Groomer.
If you are not fully satisfied with your Philips Norelco
2
Allow the Groomer to run until the
Groomer send the product back and we'll refund you
the full purchase price.
batteries are completely empty/depleted.
The Groomer must be shipped prepaid by
Turn Groomer off.
insured mail, insurance prepaid, have the original
sales receipt, indicating purchase price and date
3
Remove any comb and/or attachment from
of purchase, and the money-back guarantee
return authorization form enclosed. We cannot
Groomer.
be responsible for lost mail.
The Groomer must be postmarked no later
4
Check if there are any screws in the back or
than 45 days after the date of purchase. Philips
front of the appliance. If so, remove them.
Norelco reserves the right to verify the purchase
price of the product and limit refunds not to
exceed suggested retail price.
5
Remove the back and/or front panel of the
appliance with a screwdriver. If necessary,
To obtain money-back guarantee return
also remove additional screws and/or parts
authorization form, call 1-800-243-3050 for
assistance.
until you see the printed circuit board with
the rechargeable batteries.
Delivery of refund check will occur 6–8 weeks AFTER
receipt of returned product.
6
If necessary, cut the wires to separate the
printed circuit board and the rechargeable
batteries from the appliance.
7
Do not attempt to replace batteries. Insulate
battery ends by covering with tape and
or place battery in a small plastic bag.
Discard Groomer.
8
Contact your local town or city officials for
battery disposal information or call
1-800-8-BATTERY or www.rbrc.com for
drop-off locations.
Question?
Question?
Contact
Contact
Philips
Philips
Norelco
Norelco
4222 002 8321 1
11/7/12 10:11 AM
Advertisement
Related Manuals for Philips Norleco QG3360
Summary of Contents for Philips Norleco QG3360
- Page 1 Slide the hair clipping comb into the guiding CAUTION: Do Not insert the tip more In order to obtain warranty service, simply go to www.philips.com/ NOTE: Since all hairs do not grow in the same be cut or damaged.
- Page 2 Limpie los peines, accesorios y la unidad con sentido de crecimiento (figura 2). producto Philips modelo QG3360 (excepto las cuchillas, peines y hoja de Corporation. de tamaño completo corte) contra defectos de materiales o de fabricación durante un período el peine de limpieza suministrado o con un P ara obtener resultados óptimos en el corte,...
Need help?
Do you have a question about the Norleco QG3360 and is the answer not in the manual?
Questions and answers