FCC ID: A3KM108 • Horizontal 30KHz-61KHz frequency VIDEO • Video dot rate 80 MHz • Input impedance Video 75 ohm Sync 5K6 ohm • Input signal levels 700m Vpp Separate sync Composite sync • Sync input signal Sync on Green •...
FCC ID: A3KM108 • White x: 0.281 y: 0.311 (at 9300° K) x: 0.312 y: 0.338 Chromacity (at 6500° K) Upper >50° (typ.) Lower >60° (typ.) • Viewing Angle (C/R >5) Left >75 ° (typ.) Right >75 ° (typ.) • Response time <=30ms (typ.) * These information are subject to change without notice.
Page 4
• Temperature (operating) 5° C to 40° C • Relative humidity 20% to 80% 50K hrs (CCFL 40Khrs) • System MTBF 150P3A: Light Gray • Cabinet color 150P3C: Black * These information are subject to change without notice. RETURN TO TOP OF THE PAGE...
Page 5
FCC ID: A3KM108 Pin Assignment 1. The digital only connector contains 24 signal contacts organized in three rows of eight contacts. Signal pin assignments are listed in the table: Signal Signal Signal Assignment Assignment Assignment T.M.D.S. T.M.D.S. T.M.D.S. Data2- Data1- Data0- T.M.D.S.
Page 6
FCC ID: A3KM108 Blue video ground RETURN TO TOP OF THE PAGE Product Views Follow the links to see various views of the monitor and its components. Front View Product Description RETURN TO TOP OF THE PAGE Physical Function Tilt Swivel Height adjustment...
Page 7
FCC ID: A3KM108 Portrait display Turn monitor from landscape view to portrait view 4.1) Tilt the monitor body at an angle 4.2) Rotate the monitor body 90 degrees counter clockwise.
FCC ID: A3KM108 Installing your LCD Monitor Your LCD Monitor : Front View Product Description • Connecting to Your PC • Remove and Re-install the Base • Getting Started • Optimizing Performance • Accessories (optional) Front View Product Description UP and DOWN buttons are used when adjusting the OSD of your monitor LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used in adjusting the OSD of your...
Page 9
FCC ID: A3KM108 1. Audio power on/off and volulme adjustment 2. Audio power LED 3. Mute on/off RETURN TO TOP OF THE PAGE Side View 1. Headphone Jack 2. Microphone Jack RETURN TO TOP OF THE PAGE Rear View...
Page 10
FCC ID: A3KM108 1. Audio in 2. Mic out 3. DC 12V in 1. AC power in 2. DC 12V out for Philips Multimedia Base only 3. D-SUB Connector 4. DVI-D Connector RETURN TO TOP OF THE PAGE Optimizing Performance For best performance, ensure that your display settings are set at 1024x768@60Hz (for14"/15") or 1280x1024, 60Hz (for17"/18").
Page 11
FCC ID: A3KM108 You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the best performance out of your monitor, included in this CD. A step-by-step instructions is provided to guide you through the installtion process.
Position A1 Suspend Amber < 2 W Power Saving Position A2 Amber < 2W TAR ® PHILIPS s an NERGY artner, has determined TAR ® guidelines for that this product meets the NERGY energy efficiency. We recommend you switch off the monitor when it is not in use for quite a long time.
Page 13
FCC ID: A3KM108 computer device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS. RETURN TO TOP OF THE PAGE Commission Federale de la Communication (FCC Declaration) Cet équipement a été...
Need help?
Do you have a question about the 150P3A and is the answer not in the manual?
Questions and answers