Contents 1 Important Safety Hearing safety Notice 2 Your DVD Micro Theater Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Connect Place the unit Connect speakers and subwoofer Connect FM antenna Connect TV Connect video cables Option 1: Connect through component video...
Page 3
9 Other features Activate demonstration mode Adjust brightness of display panel Set the alarm timer Set the sleep timer Connect other devices Listen to an audio player Record to a digital recorder 10 Product information Disc Tuner (FM) Speakers General information Supported disc formats USB playability information 11 Troubleshooting...
1 Important Safety Know these safety symbols This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The ‘exclamation point’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. o Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the apparatus: Install all batteries correctly, + and - as marked on the apparatus.
Notice device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Environmental information All unnecessary packaging has been omitted.
2 Your DVD Micro Theater Congratulations on your purchase, and support that Philips offers, register your product at www.Philips.com/welcome. Introduction With this unit, you can: watch video from DVD/VCD/SVCD or USB devices enjoy audio from discs or USB devices view pictures from discs or USB devices...
Overview of the main unit Turn on the apparatus; switch to standby mode. b VOLUME / Adjust volume. Adjust time. During timer setting, select a source. c SOURCE Select a source. d Display panel Display current status. Open or close the disc compartment.
Overview of the remote control Turn on the apparatus; switch to standby mode. b Source selection keys Select a source. c DISPLAY/RDS (RDS function unavailable Display play information on a connected TV. d DISC MENU For video discs: access or exit the disc menu.
Page 10
n GOTO During disc play, specify a position to start play. o ANGLE/PROG Select a DVD camera angle. Program radio stations. p Numeric keypad Select a title/chapter/track directly. Stop play. Skip to the previous/next track. Skip to the previous/next title or chapter.
3 Connect Place the unit Place the unit near to the TV. Place the left and right speakers at equal distance from the TV and at an angle of approximately 45 degrees from the listening position. Place the subwoofer at the corner of the room or at least one meter away from the TV.
Connect FM antenna For optimal reception, fully extend and adjust the position of the antenna. For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL jack. The unit does not support MW radio reception. Connect the supplied FM wire antenna to the FM AERIAL socket on the unit.
Option 2: Connect through S-Video S - V I D E O I N Connect an S-video cable (not supplied) the S-Video socket on this unit. the S-Video socket on the TV. Option 3: Connect through composite video Connect the supplied composite video cable to: the VIDEO OUT socket on this unit.
Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No.
The video-in channel is between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO etc. See the TV user manual on how to select the correct input on the TV. Select the correct TV system Change this setting if the video does not appear correctly.
5 Play Note Play a disc Caution Never look at the laser beam inside the unit. Risk of product damage! Never play discs with accessories such as disc stabilizer rings or disc treatment sheets. Never put any objects other than discs into the disc compartment.
Insert the USB device. Press USB to select the USB source. Press DISC MENU until the folder is displayed. Press / to select a folder, then press Press / Press to start play. To stop play, press To pause or resume play, press press / .
Repeat A-B (DVD/VCD/CD/MP3/ During music or video play, press A-B at the start point. Press A-B at the end point. » The selected section starts to play repeatedly. To cancel repeat play, press A-B again. Note The section A and B can be set only within the same track/title.
Select a camera angle Note This feature is only available for DVDs recorded with multiple camera angles. During play, press ANGLE/PROG repeatedly to select a camera angle. Picture view options Preview pictures During play, press » The pictures in the current folder are displayed.
6 Adjust settings Press SYSTEM MENU. Select a setup page. Select an option and then press Select a setting and then press OK. To return to the previous menu, press To exit the menu, press SYSTEM MENU. General setup On the [General Setup] page, you can set the following options: [OSD language] Select the preferred language for on-screen...
[Picture Setting] Customize picture color settings. [Component Video] Set the video output according to the video connection. If the composite connection is used, this setting is not required. [S-VIDEO] – If the S-Video connection is used, select this option. [Interlaced] – For ordinary TV: turn on the interlace mode.
7 Tune to FM radio stations Ensure that you have connected and fully extended the supplied FM antenna. Press TUNER. Press and hold When the frequency indication starts to change, release the button. » The FM tuner tunes to a station with strong reception automatically.
8 Adjust volume level and sound effect Adjust volume level During play, press VOL +/- to increase/ decrease the volume level. Select a sound effect Note You cannot use different sound effects at the same time. Select a preset sound effect During play, press DSC repeatedly to select: [Classic]...
9 Other features Activate demonstration mode You can see an overview of all features. In standby mode, press on the main unit to activate the demonstration mode. » A demonstration of major available features starts. To deactivate the demonstration mode: Press on the main unit again.
For audio players with headphone sockets: Connect the supplied MP3 Link cable to the MP3 LINK socket and to the headphone socket on the audio player. Select the MP3 Link/AUX source. Start play on the audio player. Record to a digital recorder You can record audio from this unit to a digital recorder.
10 Product information Note Product information is subject to change without prior notice. Rated Output Power 2X8 + 25W RMS Frequency Response 50 -20000 Hz, ±3dB Signal to Noise Ratio >67dB Aux Input 1 V RMS 20kohm Disc Laser Type Semiconductor Disc Diameter 12cm/8cm...
General information AC power 220 V, 50 Hz Operation Power Consumption Standby Power <6W Consumption Composite Video 1.0Vp-p, 75ohm Output Coaxial Output 0.5Vpp ± 0.1Vpp 75ohm Headphone Output 2X15mW 32ohm USB Direct Version 2.0 Dimensions - Main Unit (W x H 220 x 90 x 240 mm x D) - Speaker Box (W x H...
Page 28
Supported formats: FAT16, FAT32 (sector size: 512 bytes) MP3 bit rate (data rate): 32-320 Kbps and variable bit rate WMA v9 or earlier Directory nesting up to a maximum of 8 levels Number of albums/ folders: maximum 99 Number of tracks/titles: maximum ID3 tag v2.0 or later File name in Unicode UTF8 (maximum length: 128 bytes)
If the problem remains unsolved, go to the Philips web site (www.Philips.com/support). When you contact Philips, ensure that your unit is nearby and the model number and serial number are available. No power Ensure that the AC cord of the apparatus is connected properly.
Need help?
Do you have a question about the MCD113/93 and is the answer not in the manual?
Questions and answers