Summary of Contents for Mitsubishi Electric MFZ-KW25VG
Page 1
FLOOR-TYPE AIR CONDITIONERS INDOOR UNIT MFZ-KW25VG MFZ-KW35VG MFZ-KW42VG MFZ-KW50VG MFZ-KW60VG For user OPERATING INSTRUCTIONS English • To use this unit correctly and safely, be sure to read these operating in- structions before use.
Page 2
● OPERATING INSTRUCTIONS ● ONTENTS ■ SAFETY PRECAUTIONS ■ NAME OF EACH PART ■ PREPARATION BEFORE OPERATION ■ SELECTING OPERATION MODES ■ FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT ■ I-SAVE OPERATION ■ ECONO COOL OPERATION ■ TIMER OPERATION (ON/OFF TIMER) ■...
Page 3
AFETY PRECAUTIONS Do not turn the breaker OFF except the case of burning Do not operate the unit for more than 4 hours at high hu- smell, or when performing maintenance or inspection. midity (80% RH or more) and/or with windows or outside door left open.
Page 4
● OPERATING INSTRUCTIONS ● AFETY PRECAUTIONS Earth the unit correctly. For installation • Do not connect the earth wire to a gas pipe, water pipe, lightning rod, or a telephone earth wire. Improper earthing may cause electric shock. WARNING CAUTION Consult your dealer for installing the air conditioner.
Page 5
AME OF EACH PART REPARATION BEFORE OPERATION Before operation: Insert the power supply plug into the power outlet and/or Remote controller turn the breaker on. Signal transmitting section Installing the remote controller batteries Distance of signal : Operation About 6 m display section Beep(s) is (are) heard from the indoor unit when the...
Page 6
● OPERATING INSTRUCTIONS ● ELECTING OPERATION MODES AUTO mode (Auto change over) The unit selects the operation mode according to the difference between the room temperature and the set temperature. During AUTO mode, the unit changes mode (COOL↔HEAT) when the room temperature is about 2˚C away from the set temperature for more than 15 minutes.
Page 7
AN SPEED AND AIRFLOW DIRECTION ADJUSTMENT Air outlet selection Press to select the air outlet(s). When 2 FLOW is selected, air blows from the top and the front of the unit. When 1 FLOW is selected, air blows only from the top of the unit. (2 FLOW) (1 FLOW) The multi-flow vane is automatically set to the appropriate position.
Page 8
● OPERATING INSTRUCTIONS ● -SAVE OPERATION CONO COOL OPERATION A simplified set back function enables to recall the preferred (preset) setting with Swing airflow (change of air flow) makes you feel cooler than stationary airflow. a single push of the button.
Page 9
MERGENCY OPERATION When the remote controller cannot be used... Emergency operation can be activated by pressing the emergency operation switch (E.O. SW) on the indoor unit. Each time the E.O. SW is pressed, the operation changes in the following order: Operation indicator lamp Emergency COOL Set temperature : 24°C...
Page 10
● OPERATING INSTRUCTIONS ● EEKLY TIMER OPERATION • A maximum of 4 ON or OFF timers can be set for individual days of the week. • A maximum of 28 ON or OFF timers can be set for a week. Press , and to set ON/OFF, time, and...
Page 11
LEANING Instructions: • Switch off the power supply or turn off the breaker before cleaning. • Do not expose parts to direct sunlight, heat, or flames to dry. • Be careful not to touch the metal parts with your hands. •...
Page 12
● OPERATING INSTRUCTIONS ● HEN YOU THINK THAT TROUBLE HAS OCCURRED Symptom Explanation & Check points Even if these items are checked, when the unit does not recover from the trouble, stop using the air conditioner and consult your dealer. Does not cool or heat The room cannot be cooled or •...
Page 13
HEN YOU THINK THAT TROUBLE HAS OCCURRED In the following cases, stop using the air conditioner and consult your dealer. • When water leaks or drips from the indoor unit. • When the left operation indicator lamp blinks. • When the breaker trips frequently. •...
Need help?
Do you have a question about the MFZ-KW25VG and is the answer not in the manual?
Questions and answers