Page 1
Super automatic espresso machine 5000 series EP5315, EP5314 EP5313, EP5311 EP5310 EN USER MANUAL DA BRUGERVEJLEDNING DE BENUTZERHANDBUCH ES MANUAL DEL USUARIO FR MODE D’EMPLOI IT MANUALE UTENTE NL GEBRUIKSAANWIJZING NO BRUKERHÅNDBOK PT MANUAL DO UTILIZADOR FI KÄYTTÖOPAS SV ANVÄNDARHANDBOK EL ΕΓΧΕΙΡΙΔΙΟ...
Page 4
AQUA CLEAN FILTER NEW? 5 sec. 30 sec. AQUA CLEAN AQUA CLEAN FILTER FILTER 1 / 8 0 / 8 2 / 8 Espresso Co ee Aroma strength...
Read the separate safety booklet carefully before you use the machine for the first time and save it for future reference. To help you get the best out of your coffee machine, Philips offers full support in 3 different ways: 1 The separate quick start guide for first installation and first use.
English 1. Activating the AquaClean filter during first installation After switching on for the first time, the machine guides you through the first installation steps such as filling the water tank, filling the water circuit and activating the AquaClean filter. Simply follow the instructions on the screen.
English Using the control panel Below you find an overview and description of the control panel of the machine. Some of the buttons have a double function; if applicable the navigation icons appear on the display. Use the buttons next to this icon to select or confirm your choices.
English Note: We advise you to rinse the water circuit before use. Press the STEAM button to dispense steam for a few seconds. 1 Fill 1/3 of a jug with cold milk. 2 Insert the classic milk frother into the milk. Press the STEAM button (Fig. 13). 3 Froth the milk by gently swirling the jug and moving it up and down (Fig.
(Fig. 17). Handling the brew group Go to www.philips.com/coffee-care for detailed video instructions on how to remove, insert and clean the brew group. Removing the brew group from the machine 1 Switch off the machine by pressing the main switch on the back of the machine.
Remove the brew group and rinse it under the tap (see 'Cleaning the brew group under the tap'). Monthly Clean the brew group with the Philips coffee oil remover tablet (see 'Cleaning the brew group with the coffee oil remover tablets'). Go to www.philips.com/coffee-care for detailed video...
Cleaning the brew group Regular cleaning of the brew group prevents coffee residues from clogging up the internal circuits. Visit www.philips.com/coffee-care for support videos on how to remove, insert and clean the brew group. Cleaning the brew group under the tap 1 Remove the brew group and the coffee residues drawer.
In that case, repairs are not covered by the warranty. Please use Philips descaler only. Under no circumstances should you use a descaler based on sulfuric acid, hydrochloric acid, sulfamic or acetic acid (vinegar) as this may damage the water circuit in your machine and not dissolve the limescale properly.
English 13 Remove and empty the container. 14 Clean the classic milk frother after descaling (see 'Weekly cleaning of classic milk frother and steam wand '). 15 Clean the brew group (see 'Cleaning the brew group under the tap'). 16 Install a new AquaClean filter in the water tank. Tip: Using the AquaClean filter reduces the need for descaling! What to do if the descaling procedure is interrupted You can exit the descaling procedure by pressing the on/off button on the control panel.
Below you find a list of the error codes showing problems that you can solve yourself. Video instructions are available on www.philips.com/coffee-care. If another error code appears, please contact the Philips Consumer Care Center in your country. For contact details, see the warranty leaflet. Error...
This chapter summarizes the most common problems you could encounter with the machine. Support videos and a complete list of frequently asked questions are available on www.philips.com/coffee- care. If you are unable to solve the problem, contact the Consumer Care Center in your country. For contact details, see the warranty leaflet.
Page 18
English Problem Cause Solution The machine is still in the You cannot remove the brew group descaling procedure. when the descaling procedure is in progress. First complete the descaling procedure and then remove the brew group. The coffee is watery. The grinder is set to a too Set the grinder to a finer (lower) setting.
Page 19
English Problem Cause Solution The machine circuit is blocked Descale the machine. by limescale. The frothed milk is too The classic milk frother is dirty Clean the classic milk frother and make cold. or not assembled correctly. sure it is correctly assembled. ...
Page 20
English Technical specifications The manufacturer reserves the right to improve the technical specifications of the product. All the preset quantities are approximate. Description Value Housing material Thermoplastic Size (w x h x d) 221 x 340 x 430 mm Weight 7.6 kg Power cord length 800 - 1200 mm...
Page 21
START DESCALING? 23 MIN Appliance overview 2...
Page 22
>75% recycled paper 421945003971_PHI5000 CMF_BACK_A5_WE.indd 1 21-01-19 10:59...
Need help?
Do you have a question about the EP5315 and is the answer not in the manual?
Questions and answers