13. TECHNICAL INFORMATION................. 21 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Page 3
ENGLISH manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
Do not leave the appliance with the open door • unattended to avoid stepping accidentally onto it. Before any maintenance operation, deactivate the • appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam •...
ENGLISH • Do not drink and play with the water in the appliance. • Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the dishes. • The appliance can release hot steam if you open the door while a programme operates.
Salt container Cutlery basket Air vent Lower basket Rinse aid dispenser Upper basket Detergent dispenser 3.1 Beam-on-Floor The Beam-on-Floor goes off when the appliance is The Beam-on-Floor is a light that is deactivated. displayed on the floor below the appliance door.
Water Energy Duration Programme (kWh) (min) 13 - 14 0.9 - 1.1 70 - 85 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
Page 10
6.5 AirDry • The indicators off. AirDry improves the drying results with • The indicator continues to less energy consumption. flash. • The display shows the current setting. – = rinse aid empty notification activated. – = rinse aid empty notification deactivated.
ENGLISH • The indicator continues to 3. Press to change the setting: flash. = AirDry deactivated. 4. Press the on/off button to confirm • The display shows the current the setting. setting: = AirDry activated. 7. OPTIONS automatically used in next cycles. This Desired options must be configuration can be changed at any activated every time before...
8.1 The salt container 8.2 How to fill the rinse aid dispenser CAUTION! Only use salt specifically designed for dishwashers. The salt is used to recharge the resin in the water softener and to assure good washing results in the daily use.
Page 13
ENGLISH 9.2 Setting and starting a Make sure that the appliance is in programme selection mode. programme • If the salt indicator is on, fill the salt container. The Auto Off function • If the rinse aid indicator is on, fill the rinse aid dispenser.
Opening the door while the Cancelling the delay start while appliance operates the countdown operates If you open the door while a programme When you cancel the delay start you is running, the appliance stops. It may have to set the programme and options affect the energy consumption and the again.
Page 15
ENGLISH cleaner which is particularly suitable • Put hollow items (cups, glasses and for this purpose. pans) with the opening down. • Detergent tablets do not fully dissolve • Make sure that cutlery and dishes do with short programmes. To prevent not bond together.
11. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a 4. Wash the filters. check regularly and, if necessary, clean them.
ENGLISH 11.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 11.4 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth.
Page 18
Problem and alarm code Possible cause and solution The program does not start. • Make sure that the appliance door is closed. • If the delay start is set, cancel the setting or wait for the end of the countdown.
Page 19
ENGLISH Problem and alarm code Possible cause and solution The appliance trips the cir- • The amperage is insufficient to supply simultaneously all cuit-beaker. the appliances in use. Check the socket amperage and the capacity of the meter or turn off one of the applian- ces in use.
Page 20
Problem Possible cause and solution The dishes are wet. • For the best drying performance activate the option XtraDry and set AirDry . • The programme does not have a drying phase or has a drying phase with low temperature.
ENGLISH Refer to "Before first use", "Daily use" or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818-898 / 550 Voltage (V) 200 - 240 Electrical connection Frequency (Hz) 50 / 60 Water supply pressure Min.
Need help?
Do you have a question about the FSS52615Z and is the answer not in the manual?
Questions and answers