Page 1 Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website. Printed using VOC (Volatile Organic Compound)-free vegetable oil based ink. Interchangeable Lens Digital Camera Instruction Manual A-mount Preparing the camera Shooting and viewing images Shooting images to suit your subject...
Page 2: Electric Shock
• Do not incinerate or dispose of in fire. • Do not handle damaged or leaking lithium ion batteries. • Be sure to charge the battery pack using a genuine Sony battery charger or a device that can charge the battery pack.
Page 3 • Keep the battery pack out of the reach of small children. • Keep the battery pack dry. • Replace only with the same or equivalent type recommended by Sony. • Dispose of used battery packs promptly as described in the instructions. Battery charger...
Page 4: For Customers In Canada
URL: http://www.compliance.sony.de/ Notice for the customers in the countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
Page 5 Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Page 6 If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.
Page 7: Table Of Contents
Table of Contents Basic operations ...14 This section provides basic information on operating the camera. Read this section first. Notes on using your camera ... 15 Preparing the camera Checking the supplied items ... 18 Identifying parts ... 19 Charging the battery pack ... 25 Inserting the battery pack/memory card (sold separately) Attaching a lens ...
Page 8 Switching the recording information display (DISP) ... 52 Setting image size ... 53 Using the playback functions Enlarging images ... 55 Switching to the display of the image list ... 56 Viewing images on a TV screen ... 57 Functions list Functions that can be operated with the buttons/dial Selecting a function with the Fn (Function) button ...
Page 9 Shooting a clear image without camera shake ... 94 Shooting Selecting the shooting mode ... 96 Movie recording setup ... 111 Adjusting the focus ... 116 Graphic Display ... 89 Monitoring the subject through the lens without effects displayed ... 89 List of icons for viewfinder mode ...
Page 10 Detecting faces ... 127 Adjusting the brightness of the image ... 131 The flash ... 135 Setting ISO ... 139 Compensating for the brightness and contrast automatically Setting the image processing ... 144 Adjusting the color tones (White balance) ... 148 Zooming in in one step ...
Page 11 Playback The screen displayed for playback mode ... 159 Using the playback functions ... 161 Protecting images (Protect) ... 164 Deleting images (Delete) ... 165 About playback on TV ... 167 Setup of the camera GPS setting (SLT-A77V only) ... 169 Setting the aspect ratio and image quality ...
Page 12 Lens compensation ... 180 Setting the method for recording on a memory card ... 181 Registering your own settings ... 185 Resetting to the default ... 186 Confirming the version of the camera ... 190 Computer Connecting the camera to the computer ... 191 Creating a movie disc ...
Page 13 Trouble shooting/Others Troubleshooting ... 203 Warning messages ... 212 Precautions ... 214 To use your camera abroad — Power sources ... 217 AVCHD format ... 218 GPS (SLT-A77V only) ... 219 3D-shootings ... 221 Memory card ... 222 Battery pack/Battery charger ... 224 The License ...
Page 14: Basic Operations
Basic operations This section provides the basic information on operating the camera. Read this section first. To more effectively take advantage of the camera, see “Advanced operations” (page 85).
Page 15: Notes On Using Your Camera
Notes on using your camera Shooting procedure • This camera has 2 modes for monitoring subjects: the LCD monitor mode using the LCD monitor, and the viewfinder mode using the viewfinder. • The recorded image may be different from the image you monitored before recording.
Page 16 Notes on long-time recording • When you continue to shoot for a long time, the temperature of the camera rises. If the temperature reaches above a certain level, the mark is indicated on the screen and the camera is turned off automatically.
Page 17 Model name This manual covers several models supplied with different lenses. The model name varies depending on the supplied lens. The available model varies depending on the countries/regions. Model name Lens SLT-A77/A77V – SLT-A77K/ DT18-55mm A77VK SLT-A77Q/ DT16-50mm A77VQ SLT-A77M/ DT18-135mm A77VM Notes on shooting with the...
Page 18: Preparing The Camera
Checking the supplied items First check the model name of your camera (page 17). The accessories supplied differ depending on the model. The number in parentheses indicates the number of pieces. Common accessories • Camera (1) • BC-VM10A Battery charger (1) •...
Page 19: Identifying Parts
Identifying parts See the pages in parentheses for details of operation. Front side AF illuminator (120)/Self-timer lamp (155) Shutter button (36) Power switch (33) Front control dial (102) Remote sensor (158) Lens contacts* Mirror* Preview button (105) Mount Built-in flash* (47, 135) Microphone** (115) Mode dial (42) (Flash pop-up) button (47,...
Page 20: Rear Side
Rear side Eyecup (86) Eyepiece sensors (86) Viewfinder* • When you look into the viewfinder, the viewfinder mode is activated, and when you take your face away from the viewfinder, the screen mode returns to the LCD monitor mode. Diopter-adjustment dial (35) LCD monitor (79, 90, 159) Light sensor (178) Multi-selector...
Page 21 Top side Auto-lock Accessory shoe (135) MENU button (62) MOVIE button (38, 111) FINDER/LCD button (179) Display panel (93) (Drive) button (51, 154) WB (White balance) button (148) (Exposure) button (49) ISO button (139) Display panel illumination button (93) Image sensor position mark (118) Rear control dial Identifying parts...
Page 22 Sides/Bottom Microphone jack • When an external microphone is connected, the internal microphone is turned off automatically. When the external microphone is a plug- in-power type, the power of the microphone is supplied by the camera. Hooks for shoulder strap •...
Page 23 Memory card insertion slot (27) Memory card cover (27) Battery insertion slot (27) Battery cover (27) Tripod receptacle • Use a tripod with a screw length of less than 5.5 mm (7/32 inch). You will be unable to firmly secure the camera to tripods with a screw length of 5.5 mm (7/32 inch) or longer, and attempting to do so may...
Page 24 Focusing mode switch Mounting index • The DT 18-55mm F3.5-5.6 SAM/DT 16-50mm F2.8 SSM/ DT 18-135mm F3.5-5.6 SAM are designed for Sony A-mount cameras (models equipped with an APS-C sized image sensor). You cannot use these lenses on 35mm-format cameras.
Page 25: Charging The Battery Pack
Charging the battery pack When using the camera for the first time, be sure to charge the NP- FM500H “InfoLITHIUM” battery pack (supplied). The “InfoLITHIUM” battery pack can be charged even when it has not been fully depleted. It can also be used when it has not been fully charged. The battery pack is discharged little by little without using it.
Page 26 Connect the battery charger to the wall outlet (wall socket). Light on: Charging Light off: Charge completed About 175 minutes Charging time • When charging a fully depleted battery pack at a temperature of 25°C (77°F). • The CHARGE lamp turns off when charging is completed.
Page 27: Inserting The Battery Pack/Memory Card (Sold Separately)
Inserting the battery pack/memory card (sold separately) While sliding the battery cover open lever, open the cover. Firmly insert the battery pack all the way while pressing the lock lever with the tip of the battery. Close the cover. While sliding the memory card cover, open the cover.
Page 28: Insert A Memory Card
Insert a memory card. • With the notched corner facing as illustrated, insert the memory card until it clicks into place. Close the cover. To remove the battery pack Turn off the camera and slide the lock lever in the direction of the arrow. Be careful not to drop the battery pack.
Page 29 Battery level High Available memory cards The following memory cards are compatible with this camera. However, all memory cards are not guaranteed to work with this camera. Types of memory card Memory Stick PRO Duo Memory Stick PRO-HG Duo SD memory card SDHC memory card SDXC memory card •...
Page 30: Attaching A Lens
Attaching a lens Remove the body cap from the camera and the rear lens cap from the rear of the lens. • When changing the lens, quickly change the lens away from dusty locations so as to keep dust or debris from getting inside the camera.
Page 31 • Do not hold the part of the lens that is extended for the zoom or focus adjustment. To remove the lens Press the lens release button all the way in and turn the lens counterclockwise until it stops. Attach the caps to the front and rear of the lens and the body cap to the camera.
Page 32 Attaching a lens • When storing, turn over the lens hood and place it onto the lens backwards. Note on changing the lens When changing the lens, if dust or debris gets inside the camera and adheres to the surface of the image sensor (the part that acts as the film), it may appear as dark spots on the image, depending on the shooting environment.
Page 33: Turning The Camera On And Setting The Clock
Turning the camera on and setting the clock When you turn the camera on for the first time, the date/time setup screen appears. Set the power switch to ON to turn the camera on. The screen used for setting date and time appears.
Page 34 Repeat step 4 to set other items, then press the center of the multi-selector. Verify that [Enter] is selected, then press the center of the multi-selector. To cancel the date/time setting operation Press the MENU button. To set up the date/time again When you turn the camera on for the first time, the date/time setup screen appears automatically.
Page 35: Before Shooting
Before shooting Adjusting the viewfinder to the visual acuity (diopter adjustment) Adjust the diopter-adjustment dial to your eyesight until the display appears clearly in the viewfinder. Note • The dioptic adjustment attachment (sold separately) cannot be used with this camera. Holding the camera properly Stabilize your upper body and take a position that keeps the camera from moving.
Page 36: Shooting And Viewing Images
Shooting still images The “AUTO” mode allows you to easily shoot any subject under any conditions because the camera makes appropriate judgments on the situation to adjust the settings. Set the mode dial to Hold the camera, monitoring your shot with the LCD monitor or viewfinder.
Page 37 Press the shutter button halfway down to focus. When the focus is confirmed, z or (Focus indicator) lights up (page 118). Press the shutter button fully down to shoot. Shooting still images Focus indicator...
Page 38: Recording Movies
Recording movies Press the MOVIE button to start recording. • Movie recording can be started from any exposure mode. • The shutter speed and aperture are adjusted automatically. If you want to set them to particular values, set the mode dial to •...
Page 39: Playing Back Images
Playing back images Press the button. MENU button t desired mode • To play back still images, select [Folder View(Still)], and to play back movies, select [Folder View(MP4)] or [AVCHD View] according to the file format. Select an image with b/B on the multi-selector. •...
Page 40: Deleting Images (Delete)
Deleting images (Delete) Once you have deleted an image, you cannot restore it. Check whether to delete the image or not beforehand. Note • Protected images cannot be deleted. Deleting the image that is currently displayed Display the image you want to delete and press the button.
Page 41: Shooting Images To Suit Your Subject
Shooting images to suit your subject Adjusting the angle of the LCD monitor Adjust the LCD monitor to an easily viewable angle. • Put your finger on the upper-left part of the LCD monitor and draw it toward you. • The LCD monitor tilts 150 degrees upward and 180 degrees downward.
Page 42: Shooting With The Various Shooting Modes
Shooting with the various shooting modes Set the mode dial to the desired mode. The following shooting modes are provided with the camera: (AUTO) (36, Allows you to easily shoot any subject under any conditions because the camera makes appropriate judgments on the situation to adjust the settings.
Page 43 (Manual Allows you to shoot after adjusting the exposure manually Exposure) (107) (both the shutter speed and the aperture value) using the front or rear control dial. (Memory Calls up setting pre-registered in [Memory] in the recall) (185) shooting menu. Set the mode dial to Point the camera towards the subject.
Page 44: Scene Selection
Scene Selection Set the mode dial to Select the desired mode with v/V, then press the center of the multi-selector. • To change the scene, press the Fn button, then select another scene. Adjust the focus and shoot the subject. (Portrait) Blurs away backgrounds and sharpens the subject.
Page 45: Sweep Panorama/ 3D Sweep Panorama
Sweep Panorama/ Set the mode dial to Panorama). Point the camera at the edge of the subject, then press the shutter button halfway down to adjust the focus. Press the shutter button fully down. Pan or tilt the camera to the end, following the guidance on the screen.
Page 46: Continuous Advance Priority Ae
Continuous Advance Priority AE Set the mode dial to Adjust the focus and shoot the subjects. • The camera continues to shoot while the shutter button is pressed fully down. • The camera records the images continuously at a maximum of about 12 images per second.
Page 47: Using The Shooting Functions
Using the shooting functions Using the flash In a dark location, using the flash allows you to shoot the subject brightly, and it also helps to prevent camera shake. When shooting into the sun, you can use the flash to shoot a bright image of the backlit subject. Fn button t •...
Page 48 (Flash Off) Does not fire even the built-in flash pops up. • You cannot select this item when the mode dial is set to P, A, S, or M. However, the flash will not be fired if it is not pulled up.
Page 49: Adjusting The Brightness Of The Image
Adjusting the brightness of the image Except for exposure mode M, the exposure is automatically selected (Automatic exposure). Based on the exposure acquired by the automatic exposure, you can perform exposure compensation. You can make the entire image brighter by shifting to the + side. The entire image becomes darker when you shift it to the –...
Page 50 Note • This item cannot be set when the exposure mode is set to AUTO, AUTO+, or Scene Selection. To compensate the exposure with the front or rear control dial MENU button t setting Note • If you assign the exposure compensation function to the front or rear control dial, the originally-assigned function can be operated with the other control dial.
Page 51: Selecting The Drive Mode
Selecting the drive mode You can use an appropriate drive mode to suit your purposes, such as single-shot advanced, continuous advanced, or bracket. button t Select the desired mode (Single This mode is for normal shooting. Shooting) (154) (Cont. Shooting) The camera records the images continuously.
Page 52: Switching The Recording Information Display (Disp)
Switching the recording information display (DISP) Each time you press the DISP button, the recording information display changes as follows. You can select the available displays in the viewfinder or on the LCD monitor separately. DISP button Display All Info. No Disp.
Page 53: Setting Image Size
Setting image size Image Size MENU button t 1 t [Image Size] t Select the desired size [Aspect Ratio]: [3:2] Image size L:24M 6000 × 4000 pixels M:12M 4240 × 2832 pixels S:6.0M 3008 × 2000 pixels [Aspect Ratio]: [16:9] Image size L:20M 6000 ×...
Page 54 [3D Pan.: Image Size] 16:9 1920 × 1080 Standard 4912 × 1080 Wide 7152 × 1080 Setting image size...
Page 55: Using The Playback Functions
Using the playback functions Enlarging images A still image can be enlarged for closer examination. This is convenient to check the focus condition of a recorded image. Display the image you want to enlarge, then press the Zoom the image in or out with the rear control dial.
Page 56: Switching To The Display Of The Image List
Switching to the display of the image list You can display multiple images on the screen simultaneously. Press the button. The image index screen is displayed. • You can select the number of images displayed on one page of the image index screen by pressing the DISP button.
Page 57: Viewing Images On A Tv Screen
Viewing images on a TV screen To view images recorded on the camera on a TV set, an HDMI cable (sold separately) and an HD TV equipped with an HDMI connector are required. Turn off both your camera and the TV, and connect the camera to the Turn on the TV and switch the input.
Page 58: Functions List
Functions that can be operated with the buttons/dial You can set up or operate various functions with these buttons/dial. For the location of the buttons/dial, see “Identifying parts” (page 19). button (47, 135) button (51, 154) WB button (148) button (49) ISO button (139) FINDER/LCD button (179) Display panel illumination...
Page 59: Selecting A Function With The Fn (Function) Button
Selecting a function with the Fn (Function) button This button is used for setting up or executing functions used frequently in shooting. Press the Fn button. Select the desired item with v/V/b/B on the multi-selector, then press the center z to execute. The setup screen appears.
Page 60: Functions That Can Be Selected With The Fn (Function) Button
Functions that can be selected with the Fn (Function) button The functions that can be selected with the Fn button are as follows: Scene Selection (44, Selects an appropriate mode from among the Scene Selection preset settings to suit shooting conditions. (Portrait/Sports Action/Macro/Landscape/Sunset/Night Scene/Hand-held Twilight/Night Portrait) Movie (112)
Page 61 Functions that can be selected with the Fn (Function) button DRO/Auto HDR (141) Compensates for the brightness and contrast automatically. (Off/D-Range Opt./Auto HDR) Creative Style (145) Selects your desired image processing. (Style Box1–6) Picture Effect (144) Shoots with the desired effect filter to achieve more impressive expression.
Page 62: The Functions Selected With The Menu Button
The functions selected with the MENU button You can set up the basic settings for the camera as a whole or execute functions such as shooting, playback, or other operations. Press the MENU button, then set up the desired item with v/V/b/B on the multi-selector, then press the center of the multi-selector.
Page 63 High ISO NR (174) Sets noise reduction processing for high-sensitivity shooting. (High/Normal/Low) Flash control (133) Sets the method for determining the intensity of flash output. (ADI flash/Pre-flash TTL/Manual flash) Power ratio (134) Sets the amount of built-in flash light when [Flash control] is set to [Manual flash].
Page 64 Record Setting (114) Selects the size of the recorded movie frame. (60i 24M(FX)/50i 24M(FX)/60i 17M(FH)/50i 17M(FH)/60p 28M(PS)/50p 28M(PS)/24p 24M(FX)/25p 24M(FX)/24p 17M(FH)/25p 17M(FH)/1440×1080 12M/VGA 3M) Audio Recording Sets whether or not to record audio when shooting a movie. (115) (On/Off) Wind Noise Reduct. Reduces wind noise during movie recording.
Page 65 DISP Button(Monitor) Allows you to select the available screen display modes of (87) the LCD monitor that can be selected by pressing the DISP button. (Graphic Display/Display All Info./No Disp. Info./Level/ Histogram/For viewfinder) DISP Button(Finder) Allows you to select the available screen display modes of (87) the viewfinder that can be selected by pressing the DISP button.
Page 66 AF/MF button (177) Assigns the desired function to the AF/MF button. (Exposure Comp./Drive Mode/Flash Mode/AF area/Face Detection/Smile Shutter/ISO/Metering Mode/Flash Comp./ White Balance/DRO/Auto HDR/Creative Style/Picture Effect/Image Size/Quality/AEL hold/AEL toggle/ hold/ Toggle/Object Tracking/AF lock/Aperture Preview/Shot. Result Preview/Smart Telecon./Focus Magnifier/Memory) Preview Button (177) Selects the method to be used for the operating preview button.
Page 67 Lens Comp.: Compensates for distortion on the screen caused by the lens Distortion (180) attached. (Auto/Off) Front Curtain Shutter Sets whether or not to use the electronic front curtain shutter (177) function. (On/Off) Face Registration Registers or changes the person to be given priority in the (128) focus.
Page 68 Folder Name (181) Sets the folder format for still images. (Standard Form/Date Form) Select REC Folder Changes the selected folder for storing still images. (182) New Folder (182) Creates a new folder for storing still images and movies. Recover Image DB Recovers the image database file and enables recording and (183) playback.
Page 69 Upload Settings* Sets the upload function of the camera when using an Eye-Fi (183) card. (On/Off) USB Connection Sets the USB connection method. (191) (Auto/Mass Storage/MTP) Audio signals Sets whether or not to use the beep sound when the focus is achieved or the self-timer is working.
Page 70: Using The Guide Function Of The Camera
Using the guide function of the camera In-Camera Guide When you press the (In-Camera Guide) button on the Fn screen or menu screen, a guide in accordance with the currently selected function or setting appears (In-Camera Guide) button automatically. Select unavailable functions or settings on the Fn screen, then press the center of the multi-selector, the appropriate setup is indicated in order to enable them.
Page 71: Viewing Images On A Computer
Viewing images on a computer Using with your computer Following applications are contained on the CD-ROM (supplied) to allow more versatile use of images shot with your camera. • “Image Data Converter” • “PMB” (Picture Motion Browser) If “PMB” has already been installed on the computer, and the version number of the previously installed “PMB”...
Page 72 Recommended computer environment (Macintosh) The following computer environment is recommended when using the supplied software and importing images via a USB connection. OS (pre-installed) USB Connection: Mac OS X (v10.3, 10.4, 10.5, 10.6) “Image Data Converter Ver.4”: Mac OS X (v10.5, 10.6 (Snow Leopard)) “Image Data CPU: Intel Core Solo/Core Duo/Core 2 Duo or faster...
Page 73: Using The Software
Using the software Installing the software (Windows) Log on as Administrator. Turn on your computer, and insert the CD-ROM (supplied) into the CD-ROM drive. The installation menu screen appears. • If it does not appear, double-click [Computer] (For Windows XP: [My Computer]) t (SONYPMB) t [Install.exe].
Page 74 • If a version of “PMB” under 5.0.00 has been installed on your computer, you may be unable to use some functions of those “PMB” when installing the “PMB” from the supplied CD-ROM. Also, “PMB Launcher” is installed from the supplied CD-ROM and you can start “PMB”...
Page 75 To use “Image Data Converter,” refer to Help. Click [Start] t [All Programs] t [Image Data Converter] t [Help] t [Image Data Converter Ver.4]. Using “PMB” With “PMB” you can do the following, etc.: • To set images shot with the camera and display them on the computer. •...
Page 76 Using the software To use “PMB,” refer to “PMB Help.” Double-click the shortcut of (PMB Help) on the desktop. Or, click [Start] t [All Programs] t [PMB] t [PMB Help]. “PMB” support page (English only) http://www.sony.co.jp/pmb-se/...
Page 77: Selecting The Method For Creating A Disc Of Movies
Player Disc type Blu-ray disc playback devices (Blu-ray disc player, PlayStation®3, etc.) AVCHD format playback devices (Sony Blu-ray disc player, PlayStation®3, etc.) Ordinary DVD playback devices (DVD player, computer that can play DVDs, etc.) Creating a disc using a computer You can import AVCHD View movies to a computer using “PMB”...
Page 78: Creating A Disc With A Device Other Than A Computer
• For details on how to create a disc, refer to the operating instructions of the device you use. • If you create a disc using Sony DVDirect (DVD Writer), use the memory card slot of the DVD Writer or connect the DVD Writer via USB connection to transfer the data.
Page 79: Others
Others List of icons on the screen Graphic Display (LCD monitor) Display All Info. (LCD monitor) For playback (Basic information display) Display Indication Exposure mode (42) P A S Register number (185) Scene Recognition icons (43, 96) Memory card (27, 222)/ Upload (183) Remaining number of recordable images...
Page 80 Display Indication Frame rate of movies (114) Image size of movies (114) 100% Remaining battery (28) Flash charge in progress (47) Setting Effect OFF (89) No audio recording of movies (115) SteadyShot/Camera shake warning (94) GPS triangulating status (169) (SLT-A77V only) SteadyShot error (211) Overheating warning (16) Database file full (213)/...
Page 81 Display Indication Drive mode (51, 154) Flash mode (47, 135)/ Red-eye reduction (64) Focus mode (116) AF area (119) Object tracking (121) Face Detection (127) Smile Shutter (129) Smile Detection Sensitivity indicator (129) Display Indication Metering mode (132) Flash compensation (132) White balance (Auto, Preset, Custom, Color temperature, Color filter)
Page 82: Functions Available For Each Shooting Mode
Functions available for each shooting mode The functions you can use depend on the selected shooting mode. In the table below, indicates the function available. – indicates the function not available. The functions you cannot use are displayed in gray on the screen. Exposure Shoot Mode Comp.
Page 83: Flash Modes Available
Flash modes available The flash modes you can select depend on the shooting mode and functions selected. In the table below, indicates the function selectable. – indicates the function not selectable. The flash modes you cannot select are displayed in gray on the screen. (Flash Shoot Mode Off)
Page 85: Advanced Operations
Preparation Advanced operations This section provides further information on the camera.
Page 86: Setting Up The Camera
Setting up the camera Removing the eyecup When attaching the FDA-A1AM Angle Finder (sold separately) to the camera, remove the eyecup. Carefully slide the eyecup off by pushing on each side of the eyecup. • Put your fingers under the eyecup, and slide it upward.
Page 87: The Screen Displayed For Shooting Mode
The screen displayed for shooting mode Selecting the screen mode You can select the desired screen mode. When you switch the screen by pressing the DISP button (page 52), only selected screens are displayed. You can set the available screens to be displayed on the LCD monitor and the viewfinder separately.
Page 88: Histogram
Histogram The histogram displays the luminance distribution that shows how many pixels of a particular brightness exist in the picture. The exposure compensation will change the histogram accordingly. Both ends of the histogram show a high- key or low-key portion. You cannot restore these area with a computer later.
Page 89: The Digital Level Gauge
The digital level gauge The digital level gauge indicates whether the camera is level in both the horizontal and front-back directions. When the camera is level in one direction, the indicator turns to green. Notes • The error of the digital level gauge is larger if you tilt the camera too far forward or backward.
Page 90: List Of Icons For Viewfinder Mode
• When [Setting Effect OFF] is selected, the Live View image in M mode is always displayed with the appropriate brightness. Note • [Setting Effect OFF] cannot be selected when the exposure mode is set to AUTO, AUTO+, Sweep Panorama, 3D Sweep Panorama, Movie or Scene Selection. List of icons for viewfinder mode When [For viewfinder] in [DISP Button(Monitor)] is activated, you can set the status of the LCD monitor to one suitable for used with the viewfinder,...
Page 91 Display Indication 24M 12M Image size of still images 6.0M 20M (53) 10M 5.1M Image quality of still images (172) Frame rate of movies (114) Image size of movies (114) 100% Remaining battery (28) Flash charge in progress (47) Setting Effect OFF (89) No audio recording of movies (115) SteadyShot/Camera...
Page 92 Display Indication Smile Shutter (129) Exposure compensation (49)/Metered Manual (108) Flash compensation (132) EV scale (49, 108, 157) Display Indication 1/125 Shutter speed (105) F2.8 Aperture (103) ISO AUTO ISO sensitivity (139) AE lock (131) The screen displayed for shooting mode...
Page 93: Display Panel
Display panel You can adjust the shutter speed, aperture, exposure compensation, flash compensation, ISO sensitivity, white balance, drive mode and image quality by checking the display panel on the top of the camera. Shutter speed (105)/ Aperture (103) ISO sensitivity (139) Drive mode (51, 154) Display Indication...
Page 94: Shooting A Clear Image Without Camera Shake
Shooting a clear image without camera shake “Camera shake” refers to unwanted movement of the camera that occurs after the shutter button has been pressed, resulting in a blurred image. To reduce camera shake follow the instructions below. Camera shake warning indicator Due to potential camera shake, the (Camera shake warning) indicator flashes.
Page 95: Using A Tripod
Shooting a clear image without camera shake Using a tripod In the following cases, we recommend that you mount the camera on a tripod. • Shooting without a flash under dark conditions. • Shooting with slow shutter speeds, which are typically used in night-time shooting.
Page 96: Selecting The Shooting Mode
Selecting the shooting mode AUTO Set the mode dial to Note • Since the camera turns on the automatic setting function, many features will be unavailable, such as exposure compensation, ISO setting. If you want to adjust various settings, set the mode dial to P, then shoot your subject. Set the mode dial to To set the continuous shooting MENU button t...
Page 97: Scene Selection
Scene Selection This mode is suitable for Shooting with preset settings according to the scene Set the mode dial to mode, and shoot images (page 44). (Portrait) Blurs away backgrounds and sharpens the subject. Expresses skin tones softly. • To blur the background more, set the lens to the telephoto position.
Page 98 (Sunset) Shoots the red of the sunrise or sunset beautifully. (Night Scene) Shoots night scenes at a distance without losing the dark atmosphere of the surroundings. • The shutter speed is slower, so using a tripod is recommended. • The picture may not be taken properly when shooting a wholly dark night scene.
Page 99: Sweep Panorama/ 3D Sweep Panorama
Notes • Since the camera judges the settings automatically, many features will be unavailable, such as exposure compensation, ISO setting. • The flash is set to [Autoflash] or [Flash Off] for each Scene Selection mode. You can change these settings (pages 47, 135). Sweep Panorama/ This mode is suitable for Shooting expansive scenery, or high-rise buildings with dynamic composition.
Page 100 • [Sweep Panorama] or [3D Sweep Panorama] recording may be discontinued in the following situations: – You pan or tilt the camera too fast or too slow. – There is too much camera shake. • The camera continues shooting during [Sweep Panorama] or [3D Sweep Panorama] recording, and the shutter keeps clicking until the end of the shooting.
Page 101: Cont. Priority Ae
To set the pan or tilt direction You can set the direction in which to pan or tilt the camera. MENU button t 1 t [Panorama: Direction] or [3D Pan.: Direction] t Select the desired setting Cont. Priority AE This mode is suitable for Shooting a fast-moving subject continuously to capture a moment.
Page 102: Program Auto
Program Auto This mode is suitable for Using the automatic exposure, while keeping the custom settings for ISO sensitivity, Creative Style, D-Range optimizer, etc. Set the mode dial to P. Set the shooting functions to your desired settings (pages 116 to 158).
Page 103: Aperture Priority
Aperture Priority This mode is suitable for Putting the subject in sharp focus and blur everything in front of and beyond the subject. Opening the aperture narrows the range that is in focus. (Depth of field becomes shallower.) Shooting the depth of the scenery. Narrowing down the aperture widens the range that is in focus.
Page 104 Adjust the focus and shoot the subject. The shutter speed is automatically adjusted to obtain correct exposure. • When the camera judges that the proper exposure is not obtained with the selected aperture value, the shutter speed flashes. In such cases, adjust the aperture again.
Page 105: Shutter Priority
To check blurring of the background (Preview button) The LCD monitor and the viewfinder shows an image captured with the widest aperture. The change in aperture affects the sharpness of the subject image, creating a discrepancy between the sharpness of the image before shooting and that of the actual image.
Page 106 Select the shutter speed with the front or rear control dial. Adjust the focus and shoot the subject. The aperture is automatically adjusted to obtain correct exposure. • When the camera judges that the proper exposure is not obtained with the selected shutter speed, the aperture value flashes.
Page 107: Manual Exposure
• Press the button when you shoot with the flash. However, when using the flash, if you close the aperture (a larger F-number) by making the shutter speed slower, the light of the flash will not reach distant subjects. Manual Exposure This mode is suitable for Shooting with the desired exposure setting by adjusting both the shutter speed and aperture.
Page 108 Shoot the image after the exposure is set. • Check the exposure value on the EV scale (Metered Manual*) when monitoring with the viewfinder. Toward +: Images become brighter. Toward –: Images become darker. The b B arrow appears if the set exposure is beyond the range of the EV scale.
Page 109: Bulb
BULB This mode is suitable for Shooting trails of light, such as fireworks. Shooting trails of stars. Set the mode dial to M. Rotate the front control dial to the left until [BULB] is indicated. Rotate the rear control dial to adjust the aperture (F-number).
Page 110 Press and hold the shutter button for the duration of the shooting. As long as the shutter button is pressed, the shutter remains open. Shooting techniques • Use a tripod. • Set the focus to infinity in manual focus mode when shooting fireworks, etc.
Page 111: Movie Recording Setup
Movie recording setup Recording movies easily Movie recording can be started from any exposure mode. The shutter speed and aperture value are adjusted automatically. Press the MOVIE button to start recording (page 38). Shooting techniques • Start recording after you adjust the focus. •...
Page 112: Recording Movies With The Shutter Speed And Aperture Adjusted
• Do not shoot a strong light source, such as the sun. The internal mechanism of the camera may be damaged. • When you import AVCHD View movies to a computer, use “PMB” (pages 71, 192). • When you continue to shoot for a long time, the temperature of the camera rises and the image quality may deteriorate.
Page 113: File Format
Adjust the focus, then press the MOVIE button to start recording. (Program Auto) Allows you to shoot with the exposure adjusted automatically (102) (both the shutter speed and the aperture value). The other settings can be adjusted manually, and your setting values can be saved.
Page 114: Record Setting
Records mp4 (AVC) movies. This format is suitable for WEB uploads, e-mail attachments, etc. • Movies are recorded in MPEG-4 format at about 30 frames/ second, utilizing the progressive scanning system, AAC audio, and the mp4 format. • You cannot create a disc from the movies recorded in this format using the supplied software “PMB.”...
Page 115: Audio Recording
Notes • Movies recorded with the [60p 28M(PS)]/[50p 28M(PS)], [60i 24M(FX)]/[50i 24M(FX)] or [24p 24M(FX)]/[25p 24M(FX)] setting in [Record Setting] are converted by “PMB” in order to create an AVCHD disc. This conversion can take a long time. Also, you cannot create a disc with the original image quality. If you want to keep the original image quality, you must store your movies on a Blu-ray disc.
Page 116: Adjusting The Focus
Adjusting the focus There are 2 methods for adjusting the focus: autofocus and manual focus. Depending on the lens, the method for switching between the auto focus and manual focus is different. The switch to be The type of lens used The lens is Lens (Set the...
Page 117 Press the shutter button halfway down to check the focus and shoot the image. • When the focus is confirmed, the focus indicator changes to z or (page 118). • The AF area where the focus has been confirmed turns green. S (Single-shot AF) The camera focuses and the focus is locked when you press the shutter button halfway down.
Page 118 Focus indicator Focus indicator Status z lit Focus locked. Ready to shoot. Focus is confirmed. Focal point moves following a moving subject. Ready to shoot. Still focusing. You cannot release the shutter. z flashing Cannot focus. The shutter is locked. Subjects that may require special focusing Using the autofocus, it is hard to focus on the following subjects.
Page 119: Focus-Lock
Focus-lock Place the subject within the AF area and press the shutter button halfway down. The focus is locked. • Set [Autofocus Mode] to [Single-shot AF]. Keep the shutter button halfway down, and put the subject back in the original position to re- compose the shot.
Page 120: The Af Illuminator
(Wide) The camera determines which of the 19 AF areas is used in focusing. (Zone) Choose the zone for which you want to activate the focus from among left, right, or center zone with the multi-selector. The camera determines which of the AF areas in the selected zone is used in focusing.
Page 121: Af Micro Adj
“±0,” or reset the values of all the lenses with [Clear]. • If you perform AF fine adjustment with a lens of other manufacturers, the adjustment values of Sony, Minolta, and Konica Minolta lenses may be affected. Do not use this function with any lens of other manufacturers.
Page 122 Align the target frame with the subject to be tracked, and press the center of the multi-selector. The camera starts tracking the subject. • To cancel this tracking feature, press the center again. Press the shutter button to shoot the subject. Notes •...
Page 123: Manual Focus
Manual focus When it is difficult to get the proper focus in autofocus mode, you can adjust the focus manually. Set the focus mode switch on the lens to MF. When the lens is not equipped with the focus mode switch, set the focus mode dial on the camera to MF.
Page 124: Peaking
Peaking You can enhance the outline of in-focus ranges with a specific color in manual focus. This function allows you to confirm the focus easily. MENU button t setting Notes • Since the camera judges that sharp areas are in focus, the peaking level is different, depending on the subject, shooting situation, or on the lens used.
Page 125: Direct Manual Focus
Press the Focus Magnifier button again to enlarge the image and select the portion you want to enlarge with v/V/b/B on the multi-selector. • Each time you press the Focus Magnifier button, the zoom scaling changes as follows: Full display t Approx.
Page 126: Af/Mf Control
Press the shutter button halfway down to lock the focus. Turn the focusing ring to fine-tune the focus while pressing the shutter button halfway down. Note • The Direct manual focus function on the camera is not available when an SAM/SSM lens is attached.
Page 127: Detecting Faces
Detecting faces Face Detection The camera detects faces, adjusts the focus, exposure, performs image processing, and adjusts flash settings. Fn button t (Face Detection) t Select the desired setting Turns off Face Detection. On (Regist. Faces) Enables Face Detection and prioritizes recognized faces that have been registered in [Face Registration] (page 128).
Page 128: Face Registration
Notes • When the exposure mode is Sweep Panorama, 3D Sweep Panorama or Continuous Advance Priority AE, the Face Detection function cannot be used. • Up to 8 faces can be detected. • The camera may not detect any faces, or may detect some other object, depending on the shooting conditions.
Page 129: Smile Shutter
MENU button t 5 t [Face Registration] t [Delete] t Select the face you want to delete • When you select [Delete All], you can delete all registered faces at one time. • Even if you select [Delete], the data on registered faces remains stored in the camera.
Page 130 Shooting techniques • To focus on the smile, overlay the Face Detection frame and AF area. • Do not cover the eyes with bangs, etc. Keep the eyes narrowed. • Do not obscure the face with a hat, a mask, sunglasses, etc. •...
Page 131: Adjusting The Brightness Of The Image
Adjusting the brightness of the image AE Lock When shooting into the sun or by a window, and the exposure may not be appropriate for the subject, use the light meter where the subject is bright enough and lock the exposure before shooting. To reduce the brightness of the subject, point the camera forwards a spot that is brighter than the subject and use the light meter to lock the exposure of the entire image.
Page 132: Metering Mode
Metering Mode Fn button t (Metering Mode) t Select the desired mode (Multi segment) This mode measures light on each area after dividing the total area into multiple areas and determines the proper exposure of the entire screen. (Center weighted) While emphasizing the central area of the screen, this mode measures the average brightness of the entire screen.
Page 133: Flash Control
Exposure compensation and flash compensation Exposure compensation changes the shutter speed, aperture, and ISO sensitivity (when [AUTO] is selected) to perform the compensation. Flash compensation only changes the amount of flash light. Flash control MENU button t 2 t [Flash control] t Select the desired setting ADI flash This method controls the lighting of the flash, factoring in the...
Page 134 • ADI flash is only available in combination with a lens that is provided with a distance encoder. To determine if the lens is equipped with a distance encoder, refer to the operating instructions supplied with the lens. • This item cannot be set when the exposure mode is set to Sweep Panorama, 3D Sweep Panorama, or [Night Scene]/[Hand-held Twilight] in Scene Selection.
Page 135: The Flash
The flash Press the Fn button, select the desired flash mode, press the button, and shoot images (page 47). Shooting techniques • The lens hood may block the light of the flash. Remove the lens hood when using the flash. •...
Page 136: Slow Sync
with a three dimensional feel by highlighting the contrast of light and shadow on the subject. For the actual steps of shooting, refer to the operating instructions of the flash. Attach the wireless flash to the Auto-lock Accessory shoe and turn both the camera and the flash on.
Page 137: Using A Flash Equipped With A Flash Sync Terminal Cord
Shoot with the SLOW SYNC button pressed. lights up on the screen to indicate the exposure is locked. Notes • When the mode dial is set to S or M, slow sync shooting is not available using the SLOW SYNC button. •...
Page 138 • Before you connect the flash sync cord to the power of the connected flash. If the power is on, it may flash when you connect the cord. • The flash will always be full emission. Flash compensation (page 132) cannot be used.
Page 139: Setting Iso
Setting ISO Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger the number, the higher the sensitivity. Press the ISO button to display the ISO screen. Select the desired setting with v/V on the multi-selector. •...
Page 140: Multi Frame Noise Reduction
Setting ISO Multi frame noise reduction The camera automatically shoots multiple images continuously, combines the images, reduces the noise, and records 1 image. In multi frame noise reduction, you can select larger ISO numbers than the maximum ISO sensitivity. The image recorded is 1 combined image. Notes •...
Page 141: Compensating For The Brightness And Contrast Automatically (D-Range)
Compensating for the brightness and contrast automatically (D-Range) Fn button t (DRO/Auto HDR) t Select the desired setting (Off) Does not use the DRO/Auto HDR functions. (D-Range Opt.) By dividing the image into small areas, the camera analyses the contrast of light and shadow between the subject and the background, producing the image with the optimal brightness and gradation.
Page 142: Auto Hdr
Compensating for the brightness and contrast automatically (D-Range) • When shooting with the D-Range optimizer, the image may be noisy. Select the proper level by checking the recorded image, especially when you enhance the effect. Auto HDR Fn button t (DRO/Auto HDR) t Select an optimal level with b/B on the multi-selector.
Page 143 Compensating for the brightness and contrast automatically (D-Range) • When the contrast of the scene is low or when camera shake or subject blur is occurred, you may not obtain good HDR images. If the camera has detected a problem, is indicated on the recorded image to inform you of this situation.
Page 144: Setting The Image Processing
Setting the image processing Picture Effect Select the desired effect filter to achieve more impressive and artistic expression. Fn button t (Picture Effect) t Select the desired setting • When a mode that has a fine adjustment option is selected, select the desired setting with b/B.
Page 145: Creative Style
Notes • When Smart Teleconverter is used, the [Toy Camera] and [Miniature] effects are not available. • When [Partial Color] is selected, images may not retain the selected color, depending on the subject or shooting condition. • When the exposure mode is set to AUTO, AUTO+, Sweep Panorama, 3D Sweep Panorama or Continuous Advance Priority AE, or when [Quality] is set to [RAW] or [RAW &...
Page 146 (Vivid) The saturation and contrast are heightened for shooting striking images of colorful scenes and subjects such as flowers, spring greenery, blue sky, or ocean views. (Neutral) The saturation and sharpness are lowered for capturing images in a quiet tone. This is also suitable for capturing image material to be modified with a computer.
Page 147 Notes • When the exposure mode is set to AUTO, AUTO+ or Scene Selection, or the Picture Effect mode is selected, [Creative Style] is fixed to [Standard] and you cannot select other settings. • When [Black & White] or [Sepia] is selected, you cannot adjust the saturation. Setting the image processing...
Page 148: Adjusting The Color Tones (White Balance)
Adjusting the color tones (White balance) The color tone of the subject changes depending on the characteristics of the light source. The table below shows how the color tone changes based on various light sources, compared with a subject that appears white under the sunlight.
Page 149: The Fine Adjustment Screen For Color
AWB (Auto WB) The camera automatically detects a light source and adjusts the color tones. (Daylight) If you select an option to suit a specific light source, the color tones are adjusted for the light source (preset white balance). (Shade) (Cloudy) (Incandescent) (Fluor.: Warm...
Page 150: Color Temp./Color Filter
Color Temp. Fine-tunes color in the B (blue) direction with b and the A (amber) direction with B. Color Filter Fine-tunes color in the G (green) direction with v and the M (magenta) direction with V. Color Temp./Color Filter WB button t (C.Temp./Filter) Set the color temperature with Press...
Page 151 WB button t [ the center of the multi-selector Hold the camera so that the white area fully covers the AF area located in the center, and then press the shutter button down. The shutter clicks and the calibrated values (Color Temperature and Color filter) are displayed.
Page 152 Note • If the flash is used when the shutter button is pressed, a custom white balance is registered with the flash light taken into account. Take pictures with the flash in later shootings. Adjusting the color tones (White balance)
Page 153: Zooming In In One Step
Zooming in in one step You can zoom in to the center of an image using the smart teleconverter (Digital zoom) and record the image. Press the button. • Each time you press the zoom scaling changes as follows: Approx. ×1.4 t Approx. ×2 t Off The image size is automatically set to the following regardless of the selected image size.
Page 154: Selecting The Drive Mode
Selecting the drive mode Shooting single shot This mode is for normal shooting. (Drive) button t Shooting) Note • When the exposure mode is set to [Sports Action] in Scene Selection, you cannot shoot single shot. Cont. Shooting The camera records the images continuously. (Drive) button t (Cont.
Page 155: Self-Timer
Notes • When is selected, the image recorded between the frames is displayed. • You cannot shoot continuously when using Scene Selection modes other than [Sports Action]. Self-timer The 10-second self-timer is convenient when the photographer appears in a photo and the 2-second self-timer is convenient to reduce the camera shake. (Drive) button t timer) t Select the desired setting...
Page 156: Number Of Images
exposure, and the camera shoots 3 or 5 images while automatically shifting the exposure. (Drive) button t (Bracket: Cont.) or (Single Bracket) t Select the desired bracket step and the number of images Adjust the focus and shoot the subject. The base exposure is set at the first shot in the bracket.
Page 157: Wb Bracket
The EV scale in bracket shooting Ambient light* bracket 0.3 steps, 3 shots Exposure compensation 0 Viewfinder LCD monitor (When [DISP Button(Monitor)] is set to [For Shown in the top row. viewfinder]) * Ambient light: Any light other than the flash light that shines on the scene for an extended period of time, such as natural light, a light bulb, or a fluorescent light.
Page 158: Dro Bracket
DRO Bracket 3 images are recorded with the value of DRO Bracket shifted. (Drive) button t (DRO Bracket) t Select the desired setting • When Lo is selected, the image is recorded with DROLv1, Lv2, and Lv3, and when Hi is selected, the image is recorded with DROLv1, Lv3, and Lv5.
Page 159: The Screen Displayed For Playback Mode
Playback (Advanced operations) Playback The screen displayed for playback mode Switching the screen during playback Each time you press the DISP button, the screen changes as follows. With recording data List of icons on the histogram display Display Indication Memory card (27, 222) View mode (161) 100-0003 Folder - file number...
Page 160 Display Indication Remaining battery warning (28) Remaining battery (28) Database file full (213)/ Database file error (213) Overheating warning (16) Display Indication Histogram* (88) Exposure mode (42) P A S 1/125 Shutter speed (105) F3.5 Aperture (103) ISO200 ISO sensitivity (139) –0.3 Exposure compensation (49)
Page 161: Using The Playback Functions
Using the playback functions Rotating an image Display the image you want to rotate, then press the Press the center of the multi-selector. The image is rotated counter-clockwise. When you want to do another rotation, repeat step 2. • Once you rotate the image, the image is played back in the rotated position, even after you turn off the power.
Page 162: Slide Show
Slide Show MENU button t Plays back recorded images in order (Slide Show). The slide show automatically stops after all the images have been played back. • You can view the previous/next image with b/B on the multi-selector. • You cannot pause the slide show. To end in the middle of the slide show Press the center of the multi-selector.
Page 163: Scrolling Panoramic Images
Using the playback functions Scrolling panoramic images Select a panoramic image, then press the center of the multi- selector. • Pressing it again pauses the playback. You can scroll a panoramic image by pressing v/V/b/B during pause. Note • Scrolling playback is not available for images that were recorded with [3D Pan.: Image Size] set to [16:9].
Page 164: Protecting Images (Protect)
Protecting images (Protect) You can protect images against accidental erasure. MENU button t Select the image you want to protect with b/B on the multi- selector, then press the center of the multi-selector. mark is put in the check box. •...
Page 165: Deleting Images (Delete)
Deleting images (Delete) You can delete only unnecessary images, or all the images. Once you have deleted an image, you cannot restore it. Check whether to delete the image or not beforehand. Note • Protected images cannot be deleted. To display the desired folder Select the bar on the left of the image index screen with the multi-selector, then select the desired folder with v/V.
Page 166: Deleting All The Images Or Movies In The Same View Mode
Deleting all the images or movies in the same view mode You can delete all still images or movies by the same view mode currently displayed. MENU button t AVCHD view files] Select [Delete] with v on the multi-selector, then press the center of the multi-selector.
Page 167: About Playback On Tv
This may cause a malfunction. On “PhotoTV HD” This camera is compatible with the “PhotoTV HD” standard. By connecting Sony’s PhotoTV HD-compatible devices using an HDMI cable, a whole new world of photos can be enjoyed in breathtaking Full HD quality.
Page 168 Connect a TV that supports “BRAVIA” Sync to the camera (page 57). The input is automatically switched and the image shot with the camera appears on the TV screen. Press the SYNC MENU button on the TV Remote Control. Operate with the buttons on the TV Remote Control. The items for SYNC MENU Slide Show Plays back images automatically (page 162).
Page 169: Setup Of The Camera
Setup of the camera (Advanced operations) Setup of the camera GPS setting (SLT-A77V only) If the camera has acquired location information using the built-in GPS feature, this information is recorded in the images or movies at that location. Using the supplied software “PMB,” you can import images recorded with location information to a computer and enjoy viewing them with a map which shows their shooting location.
Page 170: Gps Assist Data
GPS Assist Data The time for the GPS acquiring location information can be shortened by taking in GPS assist data. If the camera connects to the computer with the supplied “PMB” software installed, the GPS assist data can be updated automatically. To check the state of GPS assist data MENU button t Data]...
Page 171 GPS setting (SLT-A77V only) • There may be discrepancies of a few seconds. • Depending on the area, it may not function correctly.
Page 172: Setting The Aspect Ratio And Image Quality
Setting the aspect ratio and image quality Aspect Ratio MENU button t ratio A normal ratio. 16:9 An HDTV ratio. Note • This item cannot be set when the exposure mode is set to Sweep Panorama or 3D Sweep Panorama. Quality MENU button t (RAW)
Page 173 Setting the aspect ratio and image quality About RAW images You need the “Image Data Converter” software included on the CD-ROM (supplied) in order to open a RAW image recorded on this camera. With this software, a RAW image can be opened and converted to a common format, such as JPEG or TIFF, and its white balance, color saturation, contrast, etc., can be readjusted.
Page 174: Setting The Other Functions Of The Camera
Setting the other functions of the camera Long Exposure NR When you set the shutter speed to 1 second or longer (Long exposure shooting), noise reduction is turned on for the same duration that the shutter is open. This is to reduce the grainy noise typical in a long exposure. When noise reduction is in progress, a message appears and you cannot take another picture.
Page 175: Color Space
Color Space The way colors are represented with combinations of numbers or the range of color reproduction is called “color space.” You can change the color space, depending on your purpose. MENU button t 2 t [Color Space] t Select the desired setting sRGB This is the standard color space of the digital camera.
Page 176: Grid Line
Grid Line The grid line is an auxiliary line for shooting composition. You can set the grid line to on/off or select the type of grid line. The available range of movie recording is also displayed. MENU button t Auto Review You can check the recorded image on the screen right after the shooting.
Page 177: Iso Button, Af/Mf Button
To assign another function to the AEL button You can assign one of the following functions to the AEL button in addition to the AEL function: Exposure Comp./Drive Mode/Flash Mode/AF area/Face Detection/Smile Shutter/ISO/Metering Mode/Flash Comp./White Balance/DRO/Auto HDR/ Creative Style/Picture Effect/Image Size/Quality/AF/MF Control Hold/AF/ MF Control Toggle/Object Tracking/AF lock/Aperture Preview/Shot.
Page 178: Lcd Brightness
Notes • When you shoot at high shutter speeds with a large diameter lens attached, the ghosting of a blurred area may occur, depending on the subject or shooting conditions. In such cases, set this item to [Off]. • When a Konica Minolta lens is used, set this item to [Off]. If you set this item to [On], the correct exposure will not be set or the image brightness will be uneven.
Page 179: Power Save
Power Save You can set different time intervals for the camera to switch to power save mode (Power Save). Pressing the shutter button halfway down returns the camera to the shooting mode. MENU button t 1 t [Power Save] t Select the desired time Note •...
Page 180: Lens Compensation
(only for automatic compensation compliant lenses). For further information on automatic compensation compliant lenses, visit the Sony web site in your area, or consult your Sony dealer or local authorized Sony service facility.
Page 181: Setting The Method For Recording On A Memory Card
Setting the method for recording on a memory card Format Note that formatting irrevocably erases all data on a memory card, including protected images. MENU button t 1 t [Format] t [Enter] Notes • During the format, the access lamp lights up. Do not eject the memory card while the lamp is lit.
Page 182: Select Rec Folder
MENU button t setting Standard Form The folder name format is as follows: folder number + MSDCF. Example: 100MSDCF Date Form The folder name format is as follows: folder number + Y (the last digit)/MM/DD. Example: 10010405 (Folder name: 100, date: 2011/04/05) Note •...
Page 183: Recover Image Db
Recover Image DB When inconsistencies are found in the image database file, caused by processing images on computers, etc., images on the memory card will not be played back in this form. If this happens, the camera repairs the file. MENU button t 1 t [Recover Image DB] t [Enter] Note...
Page 184 card inserted in the camera, set [Upload Settings] to [Off]. screen when [Upload Settings] is set to [Off]. • When you use a brand-new Eye-Fi card for the first time, copy the install file of Eye- Fi manager recorded on the card to your computer before formatting the card. •...
Page 185: Registering Your Own Settings
Registering your own settings You can register 3 combinations of frequently used modes and settings in the memory. You can recall the registered settings with the mode dial. Put the camera on the setting you want to register. MENU button t Select the number you want to register with b/B on the multi- selector, then press the center of the multi-selector.
Page 186: Resetting To The Default
Resetting to the default You can reset the main functions of the camera. MENU button t t [OK] The items to be reset are as follows. Shooting functions (Reset Default/Rec mode reset) Items Exposure compensation (49) Drive mode (51, 154) Flash Mode (47, 135) AF area (119) Object Tracking (121)
Page 187 Items Panorama: Size (53) Panorama: Direction (101) 3D Pan.: Image Size (53) 3D Pan.: Direction (101) Long Exposure NR (174) High ISO NR (174) Flash control (133) Power ratio (134) AF Illuminator (120) Color Space (175) SteadyShot (94) Exposure step (63) AF-A setup (125) Priority setup (63) AF w/ shutter (63)
Page 188 Items Grid Line (176) Auto Review (176) DISP Button(Monitor) (87) DISP Button(Finder) (87) Peaking Level (124) Peaking Color (124) Live View Display (89) Func. of AEL button (176) ISO Button (177) AF/MF button (177) Preview Button (177) Focus Hold Button (66) Smart Telecon.
Page 189 Memory Card Tool menu (Reset Default) Items File Number (181) Folder Name (181) Setup menu (Reset Default) Items Menu start (68) LCD Brightness (178) Viewfinder Bright. (178) GPS Settings – GPS On/Off (169) (SLT- A77V only) GPS Settings – GPS Auto Time Cor. (170) (SLT-A77V only) Power Save (179) HDMI Resolution (167)
Page 190: Confirming The Version Of The Camera
Confirming the version of the camera Displays the version of your camera. Confirm the version when a firmware update is released. MENU button t Note • An update can be performed only when the battery level is battery icons) or more. We recommend that you use a sufficient battery or the AC- PW10AM AC Adaptor (sold separately).
Page 191: Computer
Computer (Advanced operations) Computer Connecting the camera to the computer Setting the USB connection Selects the method used for a USB connection when the camera is connected to a computer or a USB device with a USB cable. MENU button t setting Auto Mass Storage...
Page 192: Importing Images To The Computer (Windows)
Turn on the camera and the computer. Check that [USB Connection] in Connect the camera to your computer. • When a USB connection is established for the first time, your computer automatically runs a program to recognize the camera. Wait for a while. Importing images to the computer (Windows) “PMB”...
Page 193: Importing Images To The Computer (Macintosh)
Do not delete or copy AVCHD View movies on the memory card from the computer. Sony is not held liable for consequences resulting from such operations via the computer.
Page 194: Deleting The Usb Connection
Double-click the hard disk icon t the desired image file in the folder containing the copied files. The image is displayed. Note • Use “iMovie” bundled with a Macintosh computer to import or operate AVCHD View movies. Deleting the USB connection Perform the procedures from step 1 to 3 below before: •...
Page 195: Creating A Movie Disc
Creating a movie disc You can create a disc from AVCHD View movies recorded on the camera. • Movies recorded with the [60p 28M(PS)]/[50p 28M(PS)], [60i 24M(FX)]/[50i 24M(FX)] or [24p 24M(FX)]/[25p 24M(FX)] setting in [Record Setting] are converted by “PMB” in order to create an AVCHD disc.
Page 196: Creating A Standard Definition Image Quality (Std) Disc
Creating a Blu-ray disc You can create a Blu-ray disc with AVCHD View movies previously imported to a computer. Your computer must support the creation of Blu- ray discs. BD-R (non-rewritable) and BD-RE (rewritable) media can be used to create Blu-ray discs.
Page 197: Discs You Can Use With "Pmb
Discs you can use with “PMB” You can use 12 cm discs of following type with “PMB.” For Blu-ray disc, see page 196. Disc type DVD-R/DVD+R/DVD+R DL DVD-RW/DVD+RW • Always maintain your PlayStation®3 to use the latest version of the PlayStation®3 system software.
Page 198: Specifying Dpof
Specifying DPOF Using the camera, you can specify the still images before you print images at a shop or with your printer. Follow the procedure below. DPOF specifications are left with images after printing. It is recommended that you unspecify them after printing. MENU button t t [Multiple Img.] Select the image with b/B on the multi-selector.
Page 199: Cleaning The Camera And A Lens
Cleaning (Advanced operations) Cleaning Cleaning the camera and a lens Cleaning the camera • Do not touch the inside of the camera, such as lens contacts, or the mirror. Since dust on the mirror or around the mirror may affect the images or the performance of the camera, blow the dust away using a commercially available blower*.
Page 200: Cleaning The Image Sensor
Cleaning the image sensor If dust or debris enters the camera and adheres to the image sensor (the part that acts as the film), it may appear as dark spots on the photo image, depending on the shooting environment. If there is dust on the image sensor, clean the image sensor following the steps below.
Page 201: Cleaning Image Sensor Using Blower
Select [Enter] with v, and press the center of the multi- selector. The image sensor vibrates for a short time, and eliminates dust from the sensor. Turn off the camera. Cleaning the image sensor using a blower If another cleaning is needed after using the cleaning mode, clean the image sensor using a blower following the steps below.
Page 202 Use the blower to clean the image sensor surface and the surrounding area. • Do not touch the image sensor with the tip of the blower and do not put the tip of a blower into the cavity beyond the mount.
Page 203: Trouble Shooting/Others
Trouble shooting/Others Troubleshooting If you experience trouble with your camera, try the following solutions. Check the items on pages 203 to 211. Consult your Sony dealer or local authorized Sony service facility. Check the following items. Remove the battery pack, and insert the battery pack again after about 1 minute, and turn on the power.
Page 204 operate the camera, such as pressing the shutter button halfway down (page 179). The CHARGE lamp flashes when charging the battery pack. • You can use an NP-FM500H battery pack only. Make sure that the battery is NP-FM500H. • If you charge a battery pack that has not been used for a long time, the CHARGE lamp may flash.
Page 205 The shutter does not release. • You are using a memory card with a write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position. • Check the free capacity of the memory card. •...
Page 206 The flash does not work. • The flash mode is set to [Autoflash]. If you want to make sure the flash fires without fail, set the flash mode to [Fill-flash] (pages 47, 135). The flash takes too long to recharge. •...
Page 207: Deleting Images
The eyes of the subject come out red. • Activate the red eye reduction function (page 64). • Get close to the subject, and shoot the subject within the flash range using the flash. Check the flash range in “Specifications.” Dots appear and remain on the LCD monitor.
Page 208 GPS (SLT-A77V only) The camera is not receiving a GPS signal. • Set [GPS On/Off] to [On] (page 169). • Your camera may not be able to receive radio signals from GPS satellites because of obstructions. • To triangulate the location information correctly, bring your camera to an open area, and turn on the camera again.
Page 209: Memory Card
• When the battery level is low, install the charged battery pack (page 25), or use the AC Adaptor (sold separately). • Use the USB cable (supplied) (page 191). • Disconnect the USB cable, and connect it again firmly. • Disconnect all equipment other than the camera, the keyboard and the mouse from the USB jacks of your computer.
Page 210 Printing Cannot print images. • RAW images cannot be printed. To print RAW images first, convert them to JPEG images using “Image Data Converter” on the supplied CD-ROM. The color of the image is strange. • When you print the images recorded in Adobe RGB mode using sRGB printers that are not compatible with Adobe RGB (DCF2.0/Exif2.21), the images are printed at a lower intensity level (page 175).
Page 211 • If an AC Adaptor (sold separately) is used, disconnect the power plug. Connect the power plug and turn on the camera again. If the camera does not work after doing these solutions, consult your Sony dealer or local authorized Sony service facility.
Page 212: Warning Messages
Warning messages If the following messages appear, follow the instructions below. Set Area/Date/Time. • Set the area, date, and time. If you have not used the camera for a long time, charge the internal rechargeable battery (pages 33, 214). Power insufficient. •...
Page 213 System Error • Turn the power off, remove the battery pack, then re-insert it. If the message appears frequently, consult your Sony dealer or local authorized Sony service facility. Image Database File error. Recover? • You cannot record or play back...
Page 214: Precautions
Precautions Do not use/store the camera in the following places • In an extremely hot, dry or humid place In places such as in a car parked in the sun, the camera body may become deformed and this may cause a malfunction. •...
Page 215 24 hours or more with the power off. On using the lenses and accessories It is recommended that you use Sony lenses/accessories* designed to suit the characteristics of this camera. Using the products of other manufacturers may cause the camera...
Page 216 viewfinder. This may cause irrecoverable damage to your eyes. Or it may cause a malfunction of your camera. • Do not use the camera near a location that generates strong radio waves or emits radiation. The camera may not be able to record or play back properly.
Page 217: To Use Your Camera Abroad - Power Sources
To use your camera abroad — Power sources You can use your camera and the battery charger and the AC- PW10AM AC Adaptor (sold separately) in any country or region where the power supply is within 100 V to 240 V AC, 50/60 Hz. Note •...
Page 218: Avchd Format
AVCHD format The AVCHD format is a high definition digital video camera format used to record a high definition (HD) signal of either the 1080i specification* or the 720p specification* using efficient data compression coding technology. The MPEG-4 AVC/H.264 format is adopted to compress video data, and the Dolby Digital or Linear PCM system is used to compress audio...
Page 219: Gps (Slt-A77V Only)
GPS (SLT-A77V only) This system allows you to pinpoint your exact location on the earth. The GPS satellites are located in 6 orbits, 20,000 km above the earth. The GPS system consists of 24 or more GPS satellites. A GPS receiver receives radio signals from the satellites, and calculates the current location of the receiver based on the orbital...
Page 220 Department of Defense, and the degree of accuracy may be changed intentionally. • Error during the triangulating process The camera acquires location information every about 15 seconds during triangulating. There is a slight time difference between when the location information is acquired and when the location information is recorded on an image, therefore, the actual...
Page 221: 3D-Shootings
3D-shootings Notes on recording • [3D Sweep Panorama] is not suitable when shooting: – Subjects are moving. – Subjects are too close to the camera. – Subjects with a repeating pattern such as tiles, and subjects with little contrast such as sky, sandy beach, or lawn.
Page 222: Memory Card
Memory card Notes on using memory cards • Do not strike, bend or drop the memory card. • Do not use or store the memory card under the following conditions: – High temperature locations such as the hot interior of a car parked in direct sunlight.
Page 223 “Memory Stick PRO Duo” media* “Memory Stick PRO-HG Duo” media* Available with your camera “Memory Stick Duo” media Unavailable with your camera “Memory Stick” media and “Memory Stick PRO” media Unavailable with your camera *1 This is equipped with MagicGate function.
Page 224: Battery Pack/Battery Charger
Battery pack/ Battery charger • The charging time differs depending on the remaining capacity of the battery pack or charging conditions. • We recommend charging the battery pack in an ambient temperature of between 10 to 30°C (50 to 86°F). You may not be able to efficiently charge the battery pack outside of this temperature range.
Page 225: Battery Life
frequently, use continuous shooting often, turn the camera on and off frequently, or set the LCD monitor brighter. Battery life • The battery life is limited. Battery capacity decreases little by little as you use it more and more, and as time passes.
Page 226: The License
GPL/ LGPL. Source code is provided on the web. Use the following URL to download http://www.sony.net/Products/Linux/ We would prefer you do not contact us about the contents of source code. Read “license2.pdf” in the “License” folder on the CD-ROM. You will find licenses (in English) of “GPL”, and...
Page 227: Checking The Number Of Recordable Images/Recording Time
The table shows the approximate number of images that can be recorded on a memory card formatted with this camera. The values are defined using Sony standard memory cards for testing. The values may vary depending on the shooting conditions and the type of memory card used.
Page 228: Available Recording Time For A Movie
– Using the battery pack that is charged for an hour after the CHARGE lamp goes out. – Using Sony “Memory Stick PRO Duo” media (sold separately). – [Quality] is set to [Fine]. – [Autofocus Mode] is set to [Automatic AF].
Page 229: Notes On Continuous Movie Recording
“Memory Stick PRO Duo” Capacity Record Setting 60i 24M(FX)/50i 10 m 24M(FX) 60i 17M(FH)/50i 10 m 17M(FH) 60p 28M(PS)/50p 28M(PS) 24p 24M(FX)/25p 10 m 24M(FX) 24p 17M(FH)/25p 10 m 17M(FH) 1440×1080 12M 20 m VGA 3M 1 h 10 m Notes •...
Page 230 following values indicate the continuous time from when the camera starts recording until the camera stops recording.) Ambient temperature 20°C (68°F) 30°C (86°F) 40°C (104°F) • The duration of time available for movie recording varies with the temperature or condition of the camera before you start recording. If you frequently recompose or shoot images after the power is turned on, the temperature inside the camera rises and the recording time available is shorter than the values indicated in the table above.
Page 231: Specifications
Specifications Camera [System] Camera Type Lens [Image sensor] Image format Total pixel number of image sensor Effective pixel number of camera [SteadyShot] For still images For movies [Anti-Dust] System [Auto focus system] System Sensitivity Range AF illuminator [Electronic viewfinder] Type Screen size Total number of dots Frame coverage...
Page 232 Eye Point Diopter Adjustment [LCD monitor] LCD panel Total number of dots [Exposure control] Metering Cell Metering method Metering Range ISO sensitivity (Recommended exposure index) Exposure compensation [Shutter] Type Speed range Flash sync speed [Built-In-Flash] Flash G.No. Recycling time Flash coverage Flash compensation Approximately 27 mm from the eyepiece, 22 mm from the eyepiece frame at –1 m...
Page 233 Flash range [Continuous shooting] Continuous shooting speed The maximum number of continuous shots [Image zooming playback] Scaling range [Recording format] File format 3D still images Movie (AVCHD format) Aperture F2.8 F4.0 100 1 m – 4.2 m 1 m – 3 m (3.3 feet –...
Page 234 Movie (MP4 format) [Recording media] [Input/output terminals] HDMI Mic Terminal REMOTE Terminal [Power, general] Used battery pack [Others] Microphone Speaker Exif Print PRINT Image Matching III Dimensions Mass Operating temperature On image data compatibility • This camera conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan Electronics and Information Technology Industries Association).
Page 235 Battery charger/Battery BC-VM10A Battery charger Input rating Output rating Operating temperature range 0°C to 40°C (32°F to 104°F) Storage temperature range Maximum dimensions Mass Rechargeable battery pack NP-FM500H Used battery Maximum voltage Nominal voltage Maximum charge voltage Maximum charge current Capacity Maximum dimensions Mass...
Page 236 Name (Model name) Maximum magnification (X) Minimum f-stop Filter diameter (mm) Dimensions (maximum diameter × height) (approx., mm (in.)) Mass (approx., g (oz.)) * The values for equivalent 35mm-format focal length and angle of view are based on Interchangeable Lens Digital Camera equipped with an APS-C sized image sensor.
Page 237 Trademarks • is a trademark of Sony Corporation. • “Memory Stick,” , “Memory Stick PRO,” “Memory Stick Duo,” , “Memory Stick PRO Duo,” “Memory Stick PRO-HG Duo,” , “Memory Stick Micro,” “MagicGate,” and are trademarks of Sony Corporation. • “InfoLITHIUM” is a trademark of Sony Corporation.
Page 238 Specifications Accessible in areas where the PlayStation Store is available.
Page 239: Index
Index Index Numerics 3D... 45, 100, 221 Adobe RGB... 175 AE Lock ... 131 AEL button ... 174 AF area... 119 AF drive speed ... 66 AF illuminator... 120 AF Micro Adj... 121 AF w/ shutter ... 63 AF/MF button ... 177 AF/MF control ...
Page 240 Delete...40, 165 Delete confirm..69 Dial exp.comp...50, 66 Digital level gauge...89 Diopter-adjustment ...35 Direct manual focus...125 Disc creation ...77, 195 Display panel ...93 DPOF Setup...198 D-Range Optimizer ...141 Drive mode ...51, 154 DRO Bracket ...158 Enlarged image ...55 EV scale...108, 157 Exp.comp.set ...66 Exposure compensation...49 Eyecup ...86...
Page 241 JPEG ... 172 Landscape ... 44, 97 Language... 69 LCD brightness ... 178 LCD monitor... 79, 90, 159 Lens... 30 Lens Comp.: Chromatic Aberration ... 180 Lens Comp.: Distortion... 180 Lens Comp.: Peripheral Shading ... 180 Live View Display ... 89 Long exp.NR...
Page 242 Rear control dial ...55 Rear sync..47, 135 Record Setting ...114 Recording movies ...38, 111 Recover Image DB ...183 Red Eye Reduction ...64 Reducing camera shake ...94 Release w/o Lens ...175 Remote Commander ...22, 158 Reset ...186 Rotate...161 Saturation...145 Scene Selection...44, 97 Select REC Folder ...182 Self-timer ...155 Set the clock ...33...

This manual is also suitable for:

Slt-a77vq Slt-a77vm Slt-a77

Sony SLT-A77V Instruction Manual

Basic Operations

Preparing the Camera

Shooting and Viewing Images

Shooting Images to Suit Your Subject

Using the Shooting Functions

Using the Playback Functions

Functions List

Viewing Images on a Computer

Others

Advanced Operations

Preparation

Shooting

Setup of the Camera

Computer

Trouble Shooting/Others

Index

Quick Links

Need help?

Questions and answers

Related Manuals for Sony SLT-A77V

Summary of Contents for Sony SLT-A77V