Page 1
No. 0250 L19DP03C «MODEL NAMES» L19DP03U L19HP03C L19HP03U SERVICE MANUAL MANUEL D'ENTRETIEN WARTUNGSHANDBUCH CAUTION: Before servicing this chassis, it is important that the service technician read the “Safety Precautions” and “Product Safety Notices” in this service manual. Data contained within...
6.12 SPDIF Switch (NLAST4599) ....................28 1 INTRODUCTION The purpose of this document is to define the operation of 17MB27 chassis, capable of driving 15” and 19” TFT LCD panels. It is aimed to provide information to engineering staff to understand the operation and specs of the TV.
Page 4
• Teletext • IR Control (RC5 and other customer specific protocols) • “No Ident” Timer • Child Lock • Sleep Timer • WSS (16:9/4:3 Aspect Ratio Auto Switch) Sound Features • Equalizer • FM Radio • Linear Stereo • German-NICAM Stereo •...
Page 5
• OSD Color & Transparency Selection Electrical features • 12V 4.16A DC / 100 - 240V AC adapter for 15” TV • 12V 5.83A DC / 100 - 240V AC adapter for 19” TV • <1W standby power consumption System Building Blocks 17MB27 chassis main blocks are as follows: •...
There are three PWM output ports. PWM0 is assigned to analog/digital dimming control for the backlight, PWM1 is used for backlight on/off and panel logic power supply on/off control and PWM2 is used to control PC/HDMI switch IC (PI5V512). 3 POWER CONSUMPTION The power block diagram with the currents drawn is shown below: 4 MICROCONTROLLER PORT CONFIGURATION PORT...
PORT SIGNAL NAME TYPE FUNCTION NAME HDMI_HP_INV HDMI hot plug signal Switching control for Mstar bus and system I2C Safety VCTI_HS VCTI composite sync output FBIN DVD_SENSE DVD module detection Vert+ TV/DVB_SW IDTV/TV I2C and AGC switch control for tuner Write protection control for NVM Infrared input Table 4.1 VCTI port configuration...
Figure 5.2.1: LED board connector Pin2 and pin3 carry the control signals for the LED. Pin4 carries the infra-red signal to the microcontroller. Pin5 is used to power up the LED board. DVB-T module board DVB-T module board (tdm1300) is used to receive digital terrestrial broadcast signals. Three cables are used to connect 17mb27 and tdm1300: power, data, and IF.
Figure 5.3.2: DVB-T data connector on 17mb27 Tdm1300 board has no tuner on it. Instead, the tuner of 17mb27 is used for both analogue and digital reception. Tuner is controlled by either the 17mb27 microcontroller (VCTI), or tdm1300 board microcontroller. The IF (intermediate frequency) output of the tuner is sent to tdm1300 board for digital reception.
Page 10
12V (500mA) is sent to DVD electronic card by power cable: Figure 5.4.1: DVD module board power connection on 17mb27 Y/C and/or CVBS video, stereo audio outputs and infra-red input of DVD module board is carried on data cable: Figure 5.4.2: DVD data connector on 17mb27 When a DVD is inserted into the loader, the DVD electronic card sends an interrupt signal (DVD_SENSE) to the 17mb27 microcontroller:...
Figure 5.4.3: DVD_SENSE connector on 17mb27 LVDS connector MST507A-M is used for single LVDS output and MST517A-M is used for dual LVDS output on 17mb27: Figure 5.5.1: Single LVDS output connector on 17mb27...
Figure 5.5.2: Dual LVDS output connector on 17mb27 Panel_Vcc1 is the power input for the panel LCD module. PIN7 signal is a logic 1 or 0 signal depending on the panel type. Inverter 12V power, backlight on/off control, and dimming control signal are sent to the inverter board:...
Figure 5.6.1: Inverter connector on 17mb27 6 IC SPECIFICATIONS Microcontoller/Video&Audio Processor (VCT4913G) VCTI49xy is composed of microcontroller, video proccessor, display and deflection processor, sound proccessor and IF blocks as shown in below figure .
Page 15
Figure 6.1.2: Detailed block diagram of VCTI49xy VCTI49xyl family has two package types; PSSDIP88 and PMQFP144. PSSDIP88 package is chosen because of its convenience in the soldering process. PSSDIP88 package has two versions; 1 and 2. PSSDIP88-2 package is the “pinning mirrorred” version of PSSDIP88-1 and is preferred to be used for layout compatibility.
Figure 6.1.3: VCTI pinning diagram Scaler/De-interlacer (MST5x7A-M) The MST507A-M and MST517A-M are total solution graphics processing ICs for LCD displays with panel resolutions up to XGA and WXGA+ / SXGA+ respectively. They are configured with a high-speed integrated triple-ADC/PLL, a high quality display processing engine, and an integrated multi-purpose output display interface that can support all major panel interface formats.
Page 17
MST has a built-in OSD generator with 291 character font programmable RAM. OSD generator supports 2/4/8 multi-color fonts, 8/16/256 color palette and 1K code attributes. MST also supports dual channel 6-bit/single channel 8-bit TTL panel interface and 6/8-bit LVDS panel interface.
PORT SIGNAL NAME TYPE FUNCTION NAME PWM0 AN/DIG_DIM Analog or digital dimming control PWM1 BKL_ON/OFF Backlight On/Off Control PVCC_ON/OFF Panel Logic Power On/Off control PWM2 PC/HDMI_SW O Video switching control Table 6.2.1: MST5x7A-M port allocation Audio Amplifier (TDA2822M) TDA2822M is a dual low-voltage power amplifier in 8-lead minidip package. It is used in bridge configuration in 17mb27.
• Large output voltage swing Figure 6.4.1: TDA1308T block diagram Figure 6.4.2: Pinning of TDA1308T Audio Matrix Switch (TEA6422D) TEA6422D is a bus-controlled audio matrix switch in an SO28 plastic monopackage. The main features of TEA6422 D are: • 6 stereo inputs •...
Figure 6.5.1: TEA6422D pinning HDMI Receiver (ANX9021) The ANX9021 is an advanced multimedia receiver compliant with High Definition Multimedia Interface (HDMI) Specification 1.2. HDMI is the first transport standard to unify digital video, audio, and control da ta over lowcost cables. It connects digital television, flat panel displays and project systems digitally to multimedia sources: DVD players, high definition settop boxes, digital video tape recorders, and personal computers.Digital transmission, in turn, delivers an uncompromising multimedia experience.
Page 22
• Dual-channel HDMI receiver supporting link data rate up to 1.65 Gbps • HDMI 1.2, HDCP 1.1 and DVI 1.0 compliant • WideEye™ architecture for signal conditioning and equalization o support cable length up to 20m o better than 10E-12 bit error rate •...
Video Switch (PI5V512) PI5V512 is a wide-bandwidth 5-port 2:1 mux/demux video switch with High-Z outputs. The main features of PI5V512 are: • High-performance, low-cost solution to switch between video sources • Wide bandwidth: 550 MHz • Low On-Resistance: 5Ω • Low crosstalk at 10 MHz: –90dB •...
Figure 6.7.2: Pin configuration of PI5V512 Figure 6.7.3: Truth table of PI5V512 Tuner (DTT71306) DTT713xx is a digital terrestrial tuner designed for reception in VHF I, VHF III and UHF, compliant with the European digital terrestrial standard ETS 300744 and CENELEC standards EN 55013 and EN 55020. It covers all channels from 44.25 MHz to 863.25 MHz The main features of DTT713xx are: •...
Figure 6.9.2: Pin configuration of X696M 6.10 I2C Switch (74HCT4053) 74HCT4053 is a triple 2-channel analog mux/demux with a common enable input. Each multiplexer/demultiplexer has two independent inputs/outputs (nY0 and nY1), a common input/output (nZ) and three digital select inputs (S1 to S3). Figure 6.10.1: Pin configuration of 74HCT4053 Figure 6.10.2: Logic symbol of 74HCT4053...
Figure 6.10.3: Function table of 74HCT4053 6.11 Audio DAC (CS4334) CS4334 is a 8-pin, 24-bit, 96 kHz stereo D/A converter. The CS4334 family is based on Delta-Sigma modulation, where the modulator output controls the reference voltage input to an ultra-linear analog low- pass filter.
Page 28
Figure 6.11.1: Block diagram of CS4334 6.12 SPDIF Switch (NLAST4599) The NLAST4599 is an advanced high speed CMOS single pole − double throw analog switch fabricated with silicon gate CMOS technology. It achieves high speed propagation delays and low ON resistances while maintaining low power dissipation.
Page 29
• Chip Complexity: 38 FETs Figure 6.12.1: Pin assignment of NLAST4599 Figure 6.12.2: Logic symbol of NLAST4599 Figure 6.12.3: Function table of NLAST4599...
Page 30
FOR ALL PARTS PLEASE MAKE CONTACT WITH ASWO FOR YOUR LOCAL OUTLET GO TO www.aswo.com...
Page 31
DESCRIPTION FRONT COVER LCD 19784 W/H LENS LED 2832WRF (MILKY)(I) LENS IR 21005 H1: 6 H2: 5(I) 17LD62 SCREW PC ZN YFMB 3 x 9.5 SPEAKER 16R 5W 31 x 94mm. ROHS SCREW PC ZN YFMB 3 x 9.5 RoHS SCREW PC ZN YFMB 3 x 9.5 17TK109 17TK104/17TK104-S...
Page 32
C124 R412 CN122 DVB_IN_R TP117 C125 R413 BACK AV HD RGB INPUT FOR MST517 SCART CVBS OUT SOFTWARE UPDATE C12V C161 DVB_IN_G/Y F131 R274 R159 VCTI_PROG_EN VCTI_PROG_EN FAVINL 470R D140 TP118 C174 C126 600R JK102 100n R414 C418 HWSDA HWSCL DVB_IN_B/C C117 F132...
Need help?
Do you have a question about the L19DP03C and is the answer not in the manual?
Questions and answers