SAFETY SUMMARY The following general safety precautions must be observed during all phases of operation, service, and repair of this instrument. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the instrument.
Page 3
Table of Contents SAFETY SUMMARY ............. . 1-2 GENERAL INFORMATION .
IEC 801-2(1991): Electrostatic Discharge Requirements IEC 801-3(1984): Radiated Electromagnetic Field DESCRIPTION Requirements The Model E3620A Dual Output Power Supply is a compact, IEC 801-4(1988): Electrical Fast Transient/Burst constant voltage/current limiting supply that delivers two iso- Requirements lated 0 to 25 V outputs rated at 1 A. It is an ideal power supply...
The power supply is equipped at the fac- tory with a power cord plug appropriate for the user's location. Notify the nearest HP Sales and Service Office if the appro- priate power cord is not included with the supply.
OPERATION internally across each output protect the supply's output filter The dual outputs of the E3620A can be used individually, in capacitors against reverse voltages. This could occur if the sup- series, or in parallel. Each output can be floated (up to 240 plies are connected in series and the output is shorted.
peak currents (as occur in pulse loading) may exceed the OUTPUT CAPACITANCE preset current limit and cause crossover to occur and An internal capacitor across the output terminals of the supply degrade performance. helps to supply high-current pulses of short duration during constant-voltage operation.
Page 11
1853-0950 1853-0590 TRANSISTOR 2N4036 SI TO-5 PD=1W Rack Mounting Kits The part numbers for the new rack mounting kits for the E3620A are listed below. To rack mount a single instrument, order: ♦ Adapter Kit : 5063-9240 To rack mount two instruments side by side, order: ♦...
Need help?
Do you have a question about the E3620A and is the answer not in the manual?
Questions and answers