Notice for Canada ...14 Helpline ...15 Brand list ...16-28 Information to the consumer ..29 Compliance with EMF ..29 Recycling and disposal ..29 Your SRP4004 Congratulations on your purchase of the Philips SRP4004 universal remote control. After setting up the remote control you can operate up to 4 different devices with it. Simple Setup Improved with Philips patented (pending) Simple Setup technology, the SRP4004 can be set up easily for TV, DVD player / recorder, VCR and all common Cable, Satellite and other set top boxes, such as DirecTV, Comcast, AT&T, Verizon, Time Warner, Scientific Atlanta, Tivo and many more.
Note When replacing the batteries, all user settings will be retained in the remote control memory for 5 minutes. 2.2 S etting up the universal remote control The example below instructs you how to set up your universal remote controls for your TV. You can repeat the same steps for other devices (DVD player/recorder, Cable/Satellite box and VCR) which you want to operate, using the SRP4004. The remote control can be set up to operate any 4 of the following devices: Device name Description T raditional TV, flat screen TV and projection TV, TV part of TV / VCR, TV / VCR / DVD and TV / DVD combos DVD D VD player / recorder (DVDR), DVD / Hard...
S witch ON the TV. Try out the buttons you need for operating it. Try, for example, if the - CH + and digit buttons function properly. • I f a button does not work as expected, press and hold that button. Release it immediately as soon as it works. For more information, see chapter 2.2.2. P ress the device selection button twice to finish setup. • W hen no button is pressed for 5 minutes or more, the remote control will exit setup mode, automatically saving all your settings.
Buttons and functions The illustration on page 2 gives an overview of all buttons on the remote control. Try out the buttons you need for operating your devices. Notes • B uttons having the same functions as the buttons on your original remote control may have different namings on the SRP4004 (e.g. Info / Display). • O nly functions that are available on your original remote control can be used for operating your devices with the SRP4004.. S etup light. Lights up red when the remote control is in setup mode.. s elects available source inputs (antenna, cable, etc.).
.. d igit buttons for direct channel / track selection.. s witches the selected device on / off. Note For some TV brands / types, this button will only turn off the TV. You will have to press a digit button (direct channel selection) to turn on the TV again. 3.2 R esetting a button to its original function If an improved button (see chapter 2.2.2) still does not function as expected, you can always reset the button to its original function. I n the current 5 sec. device mode, keep digit buttons and pressed simultaneously for 5 seconds, until the red Setup light lights up.
fire or the like. 4.2 Need help? We advise you to first read this user manual carefully. It is provided to help you set up and use the remote control. If, however, you require extra information or have additional questions about setup, usage, spare parts, warranty, etc. of the SRP4004, you can always contact us. When calling our helpline, make sure to have the SRP4004 at hand when you call, so that our operators can help you determine whether the SRP4004 is working properly. You will find our contact details at the end of this user manual. The model number of your Philips universal remote control is SRP4004/27.
Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • R eorient or relocate the receiving antenna. • I ncrease the separation between the equipment and receiver.
IIOI OIO OOIIOI OIIOI OIIOI OOIOII IO OIIIOII OOIOII IO OIIIOII II OOIIOIIIOO OIOIOIIOIIIOIOIO IOII IOII EN Information to the consumer Compliance with EMF Koninklijke Philips Electronics N.V. manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products.
Need help?
Do you have a question about the SRP4004 and is the answer not in the manual?
Questions and answers