Page 1
Register your product and get support at www.philips.com/welcome EN User manual 21PT4430/94 21PT4440/94...
Page 3
TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use. • Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight.
Screen care • Avoid stationary images as much as possible. Stationary images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage.
2 Your product Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Product overview This section gives you an overview of commonly used controls and functions. Remote control BOOST (Standby-On) • Switches the TV to standby if it is on.
r ECO Displays the picture in a power saving mode. TIMER Sets the timers. Controls and indicators VOLUME CHANNEL POWER: Switches the product on or off. b Remote control sensor c Standby indicator d CHANNEL / : Switches to the next or previous channel.
3 Get started Connect devices This section describes how to connect various devices with different connectors. Note • Different types of connectors may be used to connect a device to your TV, depending on availability and your needs. Connect devices Connect a video player: AV sockets on the rear of TV AV in...
4 Install channels Automatically install channels Note • Make sure that the TV is in TV mode. • Press AV repeatedly until the channel number appears. Press MENU. Select [INSTALL] > [AUTO STORE]. Press to start the automatic search. Press MENU to exit. Manually install channels Note •...
5 Use your product This section helps you perform basic operations (see ‘Use more of your product’ on page 8). Switch your TV on/off or to standby To switch on • If the standby indicator is off, press the front of the TV. •...
6 Use more of your product Access TV menus Menus help you to install channels, change picture and sound settings and access other features. Press MENU. » The menu screen appears. MAIN PICTURE SOUND FEATURES INSTALL Press the to select and navigate through one of the following menus.
Use smart sound Use smart sound to apply pre-defined sound settings. Press SMART repeatedly to cycle through the four settings. • [PERSONAL]Settings are set to your preference. [VOICE]Emphasizes high tones • (treble boosted). [THEATRE]Emphasizes sensation to • action (bass and treble boosted). [MUSIC]Emphasizes low tones (bass •...
Disconnect the power cable from the power outlet. Wait until the TV cools down before reconnecting the power cable. If the blinking reoccurs, contact Philips Consumer Care. When turning the TV on/off/to standby, you hear a creaking sound from the TV chassis: •...
Page 13
Contact us If you cannot resolve your problem, refer to the FAQs for this TV at www.philips.com/ support. If the problem remains unresolved, contact Philips Consumer Care in your country. Warning • Do not attempt to repair the TV yourself. This may cause severe injury, irreparable damage to your TV or void your warranty.
8 Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/support. Picture Diagonal screen size: 54cm Visible diagonal screen size: 51cm Tuner/Reception/ Transmission • Antenna input: 75ohm coaxial • TV system: PAL, BG •...
Page 15
Errors reported to Philips will be adapted and published on the Philips support website as soon as possible. Warranty No components are user serviceable.
Need help?
Do you have a question about the 21PT4440/94 and is the answer not in the manual?
Questions and answers