11 Glossary 4 Get started Prepare the remote control Find the correct viewing channel Select menu display language Turn on Progressive Scan Use Philips EasyLink 5 Play Play from disc Play video Play music Play photo Play from USB device...
1 Important Recycle notice This electronic equipment contains a large Safety and important notice number of materials that can be recycled or reused if disassembled by a specialized company. If you are disposing of an old Warning machine, please take it to a recycling center. •...
Trademark Notice HDMI, and HDMI logo and High-DeÀ nition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/ or other countries.
Hi speed USB 2.0 link Congratulations on your purchase, and Simply plug your USB Á ash drive into the USB welcome to Philips! To fully beneÀ t from the jack to play your MP3/WMA/JPEG/DivX À les to support that Philips offers, register your product enjoy the music play in superb sound quality.
Product overview Remote control Main unit (Standby-on) • Turn on the DVD player or switch to standby mode. Disc compartment Display panel Z (Open/Close) • Open or close the disc compartment. u (Play/Pause) (Standby-On) • Start, pause or resume disc play. •...
Page 8
v V b B (Navigation buttons) AUDIO/CREATE MP3 • Navigate through the menus. • Select an audio language/channel. B) or fast- • Search fast-forward ( • Access the menu to create MP3. backward (b). Press repeatedly to x (Stop) change the search speed. •...
Connect this DVD player to the TV to view disc play. • If the device supports HDMI CEC, you can control compliant devices with a single remote control (see chapter ‘Use Philips EasyLink’). • This type of connections provide best picture quality.
Option 2: Connect to component Option 3: Connect to video (CVBS) video jacks jack VIDEO IN COMPONENT COMPONENT VIDEO OUT VIDEO IN Connect a composite video cable (supplied) to the TV OUT jack on this Connect the component video cables (not DVD player and the video input jack on supplied) to the Y Pb Pr jacks on this DVD the TV.
Route audio to other devices • You can optimize the audio output (see chapter Route the sound from this DVD player to other ‘Adjust settings’ - [ Audio Setup ] > [ Analog Output ]) for details. devices to enhance audio play. Connect USB device Connect to digital ampliÀ...
4 Get started Navigate through the menu Point the remote control directly at the remote sensor on this DVD player and select the desired function. Prepare the remote control Push to open the battery compartment cover. Use the following buttons on the remote control to navigate through the on-screen Insert two R03 or AAA batteries type with menus.
Find the correct viewing Select menu display language channel Note Press 2 to turn on the DVD player. • You can skip this setting if this DVD player is connected to a HDMI CEC compliant TV. It switches Turn on the TV and switch to the correct automatically to the same OSD menu language as video-in channel.
You can now turn on the progressive scan Turn on Progressive Scan mode on the TV (see the TV user manual). Connect a progressive scan TV with Note component video jacks (see chapter ‘Connect video cables - Option 2: Connect to •...
HDMI CEC devices. Turn on the HDMI CEC operations on the TV and other connected devices. See TVs/ devices manual for details. You can now enjoy the following Philips EasyLink controls. One-touch play When you press the STANDBY button, it turns...
5 Play • If the password entry menu is displayed, you have to enter the password before it can be played. • If you pause or stop a disc for about 5 minutes, the screen saver activates. To deactivate the screen saver, press DISC MENU.
Play video Change video play Play a title. Note Use the remote control to change the • For video disc, play always resumes from the point video play. where it was last stopped. To start play from the í beginning, press while the message is displayed.
Page 18
Preview disc contents Note • Some operations may not work with some discs. See the information accompanying the disc for details. . Access DVD menu During play, press INFO. The disc status menu is displayed. Select [ Preview ], then press B. Press DISC MENU to access disc main menu.
Page 19
Quick skip play to a speciÀ c time View DVD play from different angles During play, press INFO. During play, press INFO. The disc status menu is displayed. The disc status menu is displayed. Select [ Angle ], then press B. Select the current elapsed playing time, then press B.
Play DivX® video Play music DivX video is a digital media format that retains high quality despite a high rate of compression. Note This DVD player is DivX® CertiÀ ed so that • For some commercial audio disc, play may resume you can enjoy DivX video.
Page 21
Quick skip play Play MP3/WMA music MP3/WMA is a type of highly compressed During play, press INFO until one of audio À le (À les with .mp3, .wma extensions). the following options is selected. Insert a disc or USB that contains the MP3/ Display Action WMA music.
Play photo Note • You may require longer time to display the disc content on the TV due to the large number of songs/ photos compiled onto one disc. • If the JPEG photo is not recorded with an ‘exif ’ type Play photos as slideshow À...
Play musical slideshow Play from USB device Play MP3/WMA music À les and JPEG photo This DVD player plays/views MP3, WMA, DivX À les simultaneously to create musical slideshow. or JPEG À les that are stored on USB device. The MP3/WMA and JPEG À les must be stored on the same disc.
6 Advanced Option Description [ Speed ] Select the write-to-À le speed. features • [ Normal ] speed is selected, music play can be heard while creating the MP3 À le. [ Bitrate ] Select the quality level. Higher bitrate for better sound Create MP3 À...
7 Adjust settings Select a setting, then press OK. • To return to the previous menu, press This section describes the various setting • To exit the menu, press SETUP. options of this DVD player. Symbol Option Note [ General Setup ] •...
[ Auto Standby ] Audio setup Turn off or on automatic standby switching mode. It is an energy saving feature. Press SETUP. • [ On ] – switch to standby after 15 [ General Setup ] menu is displayed. minutes of inactivity (for example, in pause or stop mode).
Page 27
[ Analog Output ] Note Select the analog audio setting based on • [ Digital Audio ] setting is only available if the the audio device that is connected through [ HDMI Audio ] is set to [ Off ]. the analog audio jack.
[ Sound Mode ] Video setup Select a preset sound effect to enhance the audio output. Press SETUP. • [ 3D ] – select a virtual surround sound [ General Setup ] menu is displayed. effect that is produced from the left and right audio channels.
Page 29
[ Picture Setting ] [ TV System ] Select a predeÀ ned set of picture color If the video does not appear correctly, settings or customize the personal setting. change the setting. By default, this setting matches the most common setting for TVs •...
Page 30
Note set to 720p or 1080i/p. • [ 4:3 Pillar No stretching of the Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices. Box ] picture. Black bars are • You must turn on the HDMI CEC operations on...
[ Audio ] Preferences Select the default audio language for DVDs. Press SETUP. [ General Setup ] menu is displayed. [ Subtitle ] Select the default subtitle language for Press V to select [ Preferences ] , then DVDs. press B.
Page 32
This information is required when you play restricted DVDs. want to À nd out if a newest software Preferences version is available at the Philips website Change password that you may download and install on this DVD player. Old Password...
8 Additional Visit www.philips.com/support to check for the latest software version, using the À le information name for this DVD player. Refer to the upgrade instructions for more information. Note Update software • Disconnect the power cord for a few seconds and connect again to reboot the system.
Press Press numeric button ‘1’. If you contact philips, you will be asked for the model and serial number of your DVD player. The model number and serial number are on the back or bottom of your DVD player. Write...
Page 36
Play DivX video À les cannot be played. • Ensure that the DivX video À le is complete. • Ensure that the À le name extension is correct. The aspect ratio of the screen is not aligned with the TV display setting. •...
11 Glossary JPEG A very common digital still picture format. A still-picture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio. Files are Aspect ratio recognised by their À...
Page 38
Playback Control. A system of navigating a Video CD/Super VCD through on-screen menus recorded onto the disc. You can enjoy interactive play and searching. Progressive Scan The progressive scan displays twice the number of frames per second than ordinary TV system. It offers higher picture resolution and quality.
Page 39
Language Code Abkhazian 6566 Inupiaq 7375 Pushto 8083 Irish 7165 Russian 8285 Afar 6565 Afrikaans 6570 Íslenska 7383 Quechua 8185 Amharic 6577 Italiano 7384 Raeto-Romance 8277 Ivrit 7269 Romanian 8279 Arabic 6582 Armenian 7289 Japanese 7465 Rundi 8278 Assamese 6583 Javanese 7486 Samoan...
Page 40
: ……………………………………………………….. If you require assistance with the opera on of the product, its features or specifica ons, you may call the Philips Technology Care Centre on 1300 363 391 where support is provided by our trained call centre staff.
Page 41
This warranty extends only to defects in material or workmanship occurring under normal use of the product when operated in accordance with the instruc ons. c. Philips may, at its discre on choose to replace rather than repair any product covered by this Warranty.
Need help?
Do you have a question about the DVP3360/96 and is the answer not in the manual?
Questions and answers