DC power cord for normal operation. • Please use approved power cord 1.1 Safety precautions and provided by Philips all the time. If maintenance your power cord is missing, please contact with your local service Warnings center.
Page 4
1. Important your workstation than longer breaks The screen may be wiped with a and less often; for example a 5-10 dry cloth when the power is off. minute break after 50-60-minute However, never use organic solvent, continuous screen use is likely to such as, alcohol, or ammonia-based be better than a 15-minute break liquids to clean your monitor.
1. Important technology. In most cases, the 1.2 Notational Descriptions “burn-in” or “after-imaging” or The following subsections describe “ghost imaging” will disappear notational conventions used in this gradually over a period of time after document. the power has been switched off. Warning Notes, Cautions and Warnings Failure to activate a screen saver, or...
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back...
Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield (3) Use a screwdriver to tighten the Emblem are registered trademarks of Koninklijke Philips N.V.
Page 8
2. Setting up the monitor Connecting to your PC Connect to PC 1. Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 4 5 6 3. Connect the monitor signal cable to the video connector on the back of Fast Charger your computer.
2. Setting up the monitor Some select Philips displays may not 2.2 Operating the monitor Power or Charge your device when it enters to “Sleep” mode (White power Description of the control buttons LED blinking). In that case, please enter to OSD Menu and select “USB Standby...
Page 10
1, 2, 3, 4 What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature HDMI 1.4 Input DisplayPort in all Philips LCD monitors. It allows an USB C end user to adjust screen performance Picture Adaptive Sync On, O...
2. Setting up the monitor Resolution notification 2.3 Remove the Base Assembly This monitor is designed for optimal for VESA Mounting performance at its native resolution, Before you start disassembling the 1920 x 1080. When the monitor is monitor base, please follow the powered on at a different resolution, an instructions below to avoid any possible alert is displayed on screen:...
Page 12
2. Setting up the monitor Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation. 100mm 100mm...
How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. • EasyRead: Helps improve reading Based on a scenario you select, of text based application like PDF SmartImage dynamically enhances the ebooks.
LED displays can cause eye damage and affect vision over time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light. • Off: No optimization by SmartImage.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type IPS Technology Backlight W-LED Panel Size 23.8" W (60.5 cm) Aspect Ratio 16:9 Pixel Pitch 0.2745 (H) mm x 0.2745 (V) mm Contrast Ratio(typ.) 1000:1 Optimum Resolution 1920 x 1080 @ 60 Hz Viewing Angle 178°...
Page 17
5. Technical Specifications Other Convenience VESA mount (100 x 100 mm), Kensington Lock Plug & Play Compatibility DDC/CI, sRGB, Windows 10/8.1/8/7, Mac OS X Stand Tilt -5 / +25 degree Power AC Input AC Input AC Input Consumption Voltage at Voltage at Voltage at 100VAC , 50Hz...
Page 18
500 to 1060hPa (Non-operation) Environmental and energy ROHS Packaging 100% recyclable Specific Substances 100% PVC BFR free housing Cabinet Color Black Finish Texture Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced...
Page 22
Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
Page 23
7. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
Service contact information listed known as "after-imaging" or "ghost in Regulation & Service Information imaging", on your screen. "Burn-in", Manual and contact Philips customer "after-imaging", or "ghost imaging" service representative. is a well-known phenomenon in * Functionality different according to LCD panel technology.
Page 27
• Shut down your computer, that the panel surface is not disconnect your old monitor and subjected to excessive shocks reconnect your Philips LCD monitor. and is protected from sharp or • Turn on your monitor and then turn blunt objects. When handling the on your PC.
Page 28
“ghost image” symptoms any PC, workstation or Mac? that will not disappear and cannot be repaired. The damage mentioned above Ans.: Yes. All Philips LCD monitors are is not covered under your warranty. fully compatible with standard PCs, Macs and workstations.
Page 29
8. Troubleshooting & FAQs Q14: Where can I find Regulation & Service Information Manual mentioned in EDFU? Ans.: Regulation & Service Information Manual can be download on the Philips website support page.
Page 30
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the 243S9 and is the answer not in the manual?
Questions and answers