Related Manuals for Philips 288B6
Summary of Contents for Philips 288B6
- Page 1 B line 288B6 www.philips.com/welcome EN User manual Customer care and warranty 18 Troubleshooting & FAQs...
-
Page 2: Table Of Contents
3.3 HDR ..............12 4. Technical Specifications .....13 4.1 Resolution & Preset Modes ....16 5. Power Management ......17 6. Customer care and warranty ..18 6.1 Philips’ Flat Panel Monitors Pixel Defect Policy ..........18 6.2 Customer Care & Warranty ....21 7. Troubleshooting & FAQs ....22 7.1 Troubleshooting ..........22... -
Page 3: Important
DC power cord for normal operation. notes regarding the operation of your monitor. • Please use approved power cord provided by Philips at all times. If The Philips guarantee applies provided your power cord is missing, please the product is handled properly for contact your local service center. - Page 4 1. Important • If foreign substance or water gets in Service your monitor, please turn the power • The casing cover should be opened off immediately and disconnect only by qualified service personnel. the power cord. Then, remove the • If there is any need for any foreign substance or water, and document for repair or integration, send it to the maintenance center.
-
Page 5: Notational Descriptions
1. Important 1.2 Notational Descriptions 1.3 Disposal of product and packing material The following subsections describe notational conventions used in this Waste Electrical and Electronic document. Equipment-WEEE Notes, Cautions and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. - Page 6 From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take- back initiatives and recycling programs whenever possible, preferably...
-
Page 7: Setting Up The Monitor
Top Victory Investments Ltd. or one of its a liates. Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. -
Page 8: Operating The Monitor
2. Setting up the monitor Connecting to your PC 2.2 Operating the monitor Description of the control buttons Kensington anti-theft lock Earphone jack Display port input HDMI input HDMI input Switch monitor’s power ON AC power input OFF. Power Switch Access the OSD menu. - Page 9 On-Screen Display. You can use On-Screen Display (OSD) is a feature in this as a reference when you want to all Philips LCD monitors. It allows an end work your way around the different user to adjust screen performance or adjustments later on.
- Page 10 2. Setting up the monitor Resolution notification Height adjustment This monitor is designed for optimal performance at its native resolution, 3840 × 2160 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 3840 ×...
-
Page 11: Remove The Base Assembly For Vesa Mounting
2. Setting up the monitor Note 2.3 Remove the Base Assembly This monitor accepts a 100mm x 100mm for VESA Mounting VESA-Compliant mounting interface. Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. -
Page 12: Image Optimization
Whether you're working There are multiple selections: EasyRead, with text applications, displaying images Office, Photo, Movie, Game, Economy, or watching a video, Philips SmartImage LowBlue Mode,SmartUniformity delivers great optimized monitor Off. performance. -
Page 13: Smartcontrast
Developed for wellbeing, entertainment experience when viewing Philips LowBlue Mode setting uses a videos or playing games. smart software technology to reduce harmful shortwave blue light. • SmartUniformity: Fluctuations in... -
Page 14: Hdr
3. Image Optimization 3.3 HDR Settings in Windows 10 system Steps 1. Right click on the desk top, enter to Display settings. 2. Select the display/monitor. STEP 5 3. Adjust resolution to 3840 x 2160. 4. Turn the “HDR and WCG” to on mode. 5. -
Page 15: Technical Specifications
4. Technical Specifications 4. Technical Specifications Picture/Display Monitor Panel Type TFT-LCD Backlight W-LED system Panel Size 28" W (71.1cm) Aspect Ratio 16:9 Pixel Pitch 0.16 (H) x 0.16 (V) mm SmartContrast 50,000,000:1 Response Time SmartResponse 1ms (GtG) Optimum Resolution 3840 x 2160 @ 60Hz Viewing Angle 170°... - Page 16 4. Technical Specifications Power AC Input AC Input AC Input Consumption Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC, 50Hz Normal Operation 44.7 W (typ.) 44.8 W (typ.) 44.9 W (typ.) Sleep (Standby) <0.5 W (typ.) <0.5 W (typ.) <0.5 W (typ.) <0.3 W (typ.)
- Page 17 Finish Texture Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
-
Page 18: Resolution & Preset Modes
4. Technical Specifications 4.1 Resolution & Preset Modes Maximum Resolution 3840 x 2160 @ 60 Hz Recommended Resolution 3840 x 2160 @ 60 Hz H. freq Resolution V. freq (Hz) (kHz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480... -
Page 19: Power Management
5. Power Management 5. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 20: Customer Care And Warranty
6.1 Philips’ Flat Panel Monitors single black pixel. Other combinations Pixel Defect Policy of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the Types of Pixel Defects... - Page 21 Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
- Page 22 6. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* ≤ 15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 15 or fewer...
-
Page 23: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 24: Troubleshooting & Faqs
• Disconnect the monitor from mains This page deals with problems that can power source immediately for safety be corrected by a user. If the problem • Contact with Philips customer still persists after you have tried these service representative immediately. solutions, contact Philips customer service representative. -
Page 25: General Faqs
• Shut down your computer, resolution. disconnect your old monitor and reconnect your Philips LCD monitor. Green, red, blue, dark, and white dots • Turn on your monitor and then turn appears on the screen on your PC. - Page 26 Can I connect my LCD monitor to Ans.: For normal cleaning, use a clean, any PC, workstation or Mac? soft cloth. For extensive cleaning, Ans.: Yes. All Philips LCD monitors are please use isopropyl alcohol. Do fully compatible with standard not use other solvents such as PCs, Macs and workstations.
- Page 27 7. Troubleshooting & FAQs "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content.
- Page 28 Top Victory Investments Ltd. or one of its affiliates. Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license.
Need help?
Do you have a question about the 288B6 and is the answer not in the manual?
Questions and answers