• Please use approved power cord provided by Philips at all times. If The Philips guarantee applies provided your power cord is missing, please the product is handled properly for contact your local service center.
Page 4
1. Important • Excessive usage of monitor can The screen may be wiped with a cause eye discomfort, it’s better to dry cloth when the power is off. take shorter breaks more often at However, never use organic solvent, your workstation than longer breaks such as, alcohol, or ammonia-based and less often;...
1. Important disappear gradually over a period 1.2 Notational Descriptions of time after the power has been The following subsections describe switched off. notational conventions used in this Warning document. Failure to activate a screen saver, or a periodic screen refresh application Notes, Cautions and Warnings may result in severe “burn-in”...
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, This marking on the product or on end-of-life management primarily its packaging illustrates that, under...
Top Victory Quick Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are Start registered trademarks of Koninklijke Philips N.V. and are used under license.
Page 8
2. Setting up the monitor Install base stand 245E1 1. Place the monitor face down on soft 245E1S/241E1S and smooth surface taking care to 1. Place the monitor face down on soft avoid scratching or damaging the and smooth surface taking care to screen.
Page 9
2. Setting up the monitor Connecting to your PC Connect to PC 1. Connect the power cord to the back 245E1S / 245E1 of the monitor firmly. 2. Turn off your computer and unplug its power cable. 3. Connect the monitor signal cable to the video connector on the back of your computer.
What is On-Screen Display (OSD)? Front view product description On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
Page 11
• Do not press the screen while the monitor is powered on at a different adjusting the angle of the monitor. resolution, an alert is displayed on Grasp only the bezel. screen: Use 245E1S/245E1 : 1920×1080(Analog)&2560×1440(Digital) 241E1S : 1920×1080(Analog/Digital) for best results.
100mm from the stand. 245E1 1. Place the display face down on a smooth surface. Pay attention not to scratch or damage the screen. 3. Remove the hinge cover from...
Page 13
2. Setting up the monitor 2. Use a screwdriver to loosen the Note screw located at the bottom of the This monitor accepts a 100mm x 100mm base, and remove the base from the VESA-Compliant mounting interface. stand. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation.
Whether you're working with text applications, displaying images or watching a video, Philips SmartImage delivers great optimized monitor performance. 245E1 Why do I need it?
3. Image Optimization 3. The SmartImage on screen display time. Developed for wellbeing, will remain on screen for 5 seconds Philips LowBlue Mode setting uses a or you can also toggle to the left to smart software technology to reduce make confirmation.
4. AMD FreeSync™ • AMD Radeon R7 260X 4. AMD FreeSync • AMD Radeon R7 260 ■ Processor A-Series Desktop and Mobility APUs • AMD A10-7890K • AMD A10-7870K PC gaming has long been an imperfect • experience because GPUs and monitors AMD A10-7850K update at different rates.
245E1S/245E1: 30KHz-114KHz Frequency 241E1S: 30KHz-83KHz sRGB LowBlue Mode AMD FreeSync Connectivity 245E1S/245E1: VGA (Analog), HDMI (Digital, HDCP), DP (Digital) Signal Input 241E1S: VGA (Analog), HDMI (Digital, HDCP) 245E1S/245E1: Audio out Audio In/Out 241E1S: HDMI audio out Input Signal Separate Sync, Sync on Green...
Page 18
Power LED indicator (blinking) Power Supply External, 100-240VAC, 50-60Hz Dimension Product with stand 245E1S/241E1S : 540 x 414 x 195 mm (WxHxD) 245E1 : 540 x 414 x 207 mm Product without stand 540 x 325 x 43 mm (WxHxD)
Page 19
500 to 1060hPa (Non-operation) Environmental ROHS Packaging 100% recyclable Specific Substances 100% PVC BFR free housing Cabinet Color Black Finish texture Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
67.50 1920x1080 60.00 Note 83.89 1920x1080 74.97 Please notice that your display works best 88.79 2560x1440 59.95 at native resolution of 245E1S/245E1: 1920x1080@60Hz(Analog) 111.03 2560x1440 74.97 &2560x1440@60Hz(Digital) 241E1S: 1920x1080@60Hz(Analog / Digital). For best display quality, please follow this resolution recommendation.
(blink) mode) Off mode OFF 0.3 W The following setup is used to measure power consumption on this monitor. • Native resolution: 245E1S/245E1: 1920x1080(Analog)&2560x1440(Digital) 241E1S: 1920x1080(Analog/Digital) • Contrast: 50% • Brightness: 90% • Color temperature: 6500k with full white pattern...
Other combinations Pixel Defect Policy of lit and dark sub pixels appear as single pixels of other colors. Philips strives to deliver the highest quality products. We use some of the Types of Pixel Defects industry's most advanced manufacturing...
Page 23
A red or blue bright dot must be the warranty period, a TFT Monitor more than 50 percent brighter than panel in a Philips flat panel monitor must have pixel or sub pixel defects neighboring dots while a green exceeding the tolerances listed in the bright dot is 30 percent brighter than following tables.
Page 24
7. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >10mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
Service contact information listed in images over an extended period Important information manual and may cause "burn in", also known as contact Philips customer service "after-imaging " or "ghost imaging", representative. on your screen. "Burn-in", "after- * Functionality different according to imaging", or "ghost imaging"...
Page 28
• Restart your computer and Ans.: Simply press the OK button, then repeat step 2 and 3 to verify that select 'Reset' to recall all of the your PC is set at 245E1S/245E1: original factory settings. 1920×1080@60Hz(Analog)& Is the LCD screen resistant to 2560×1440@60Hz(Digital)
Page 29
Q12: Why is my Display not showing any PC, workstation or Mac? sharp text, and is displaying jagged Ans.: Yes. All Philips LCD monitors are characters? fully compatible with standard Ans.: Your LCD monitor works best at its PCs, Macs and workstations.
Page 30
8. Troubleshooting & FAQs Q14: Where can I find Important Information manual mentioned in EDFU? Ans.: Important Information manual can be download on the Philips website support page.
Page 31
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the 245E1 and is the answer not in the manual?
Questions and answers