1. Important Please use approved power cord provided 1. Important by Philips at all times. If your power cord is missing, please contact your local service This electronic user’s guide is intended for center. (Please refer to Customer Care anyone who uses the Philips monitor. Take time...
1. Important Temperature: 0-40°C 32-104°F 1.2 Notational Descriptions Humidity: 20-80% RH The following subsections describe notational Important information for Burn-in/Ghost conventions used in this document. image Notes, Cautions and Warnings Always activate a moving screen saver Throughout this guide, blocks of text may be program when you leave your monitor accompanied by an icon and printed in bold or unattended.
Taking back/Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of...
User’s Manual Monitor drivers 保留备用 Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. located at the bottom of the base, and secure the base to the stand tightly.
Page 7
2. Setting up the monitor Connecting to your PC Connect to PC 1. Connect the power cord to the back of 2. Turn off your computer and unplug its power cable. 3. Connect the monitor signal cable to the video connector on the back of your computer.
2.2 Operating the monitor What is On-Screen Display (OSD)? Description of the control buttons Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen...
Page 9
2. Setting up the monitor The OSD Menu Below is an overall view of the structure of This monitor is designed for optimal the On-Screen Display. You can use this as a performance at its native resolution, reference when you want to work your way 1920 ×...
2. Setting up the monitor Height adjustment 2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1. Extend the monitor base to its maximum height.
LED monitor can cause damage to different parts of the eye and affect vision over time. Philips SoftBlue feature uses a smart technology to reduce the 100mm harmful blue light waves without effecting the color or image of the monitor.
An optional MHL cable allows you to simply connect your MHL capable mobile device to this large Philips MHL display, and watch your HD videos come to life with full digital sound. Note...
This mode significantly How does it work? enhances readability and productivity when SmartImage is an exclusive, leading edge Philips you’re working with spreadsheets, PDF files, technology that analyzes the content displayed scanned articles or other general office on your screen.
3. Image Optimization Under this profile, brightness, contrast are adjusted and backlighting finetuned for just right display of everyday office applications and lower power consumption. No optimization by SmartImage. 3.2 SmartContrast What is it? Unique technology that dynamically analyzes displayed content and automatically optimizes a Monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter...
4. PowerSensor™ Hot key Sensor distance 4. PowerSensor™ How does it work? PowerSensor works on principle of transmission and reception of harmless “infrared” signals in order to detect user- presence. When the user is in front of the monitor, Landscape/Portrait mode the monitor operates normally, at the predetermined settings that the user has set- i.e.
5. LightSensor 5. LightSensor What is it? Light Sensor is a unique and intelligent way of optimizing picture quality by measuring and analyzing the incoming signal to automatically adjust picture quality settings. Light Sensor uses a sensor to adjust the picture brightness depending on the room light conditions.
Page 18
Power(EnergyStar test method) AC Input Voltage AC Input Voltage AC Input Voltage Energy Consumption at 100VAC , 50Hz at 115VAC , 60Hz at 230VAC, 50Hz Normal Operation AC Input Voltage AC Input Voltage AC Input Voltage Heat Dissipation* at 100VAC , 50Hz at 115VAC , 60Hz at 230VAC , 50Hz 65.60 BTU/hr...
Page 19
Finish Texture Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the...
6.1 Resolution & Preset Modes Maximum Resolution Recommended Resolution H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67 37.86 640 x 480 72.81 37.50 640 x 480 75.00 37.88 800 x 600...
7. Power Management 7. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
8. Regulatory Infomation environmental management system (EMAS 8. Regulatory Information Very low energy consumption both in onand standby mode minimize climate Congratulations, impact Your display is designed for both Restrictions on chlorinated and brominated you and the planet! flame retardants, plasticizers, plastics and The display you have just purchased carries the heavy metals such as cadmium, mercury your display is designed, manufactured and...
Page 23
RoHs directive mandating restrictions EN55022:2010(Radio Disturbance on hazardous substances in electrical and requirement of Information Technology electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle. EN55024:2010 (Immunity requirement of EPEAT EN61000-3-2:2006+A1:2009+A2:2009 (www.epeat.net...
Page 24
8. Regulatory Infomation Energy, Ecology and Emission, TCO: Swedish approved by the party responsible for for TCO versions. compliance could void the user's authority to operate the equipment. Energy Star Declaration Use only RF shielded cable that was supplied (www.energystar.gov with the monitor when connecting this monitor ®...
Page 25
8. Regulatory Infomation EN 55022 Compliance (Czech Republic Only) nuisibles aux communications radio. Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière. Si cet appareil est la cause d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce qui peut être décelé...
Page 26
8. Regulatory Infomation North Europe (Nordic Countries) Information Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht Placering/Ventilation den in der "Verordnung über den Schutz vor VARNING: Schäden durch Röntgenstrahlen" festgelegten FÖRSÄKRA DIG OM ATT HUVUDBRYTARE Vorschriften. OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS.
Page 27
Products" or commonly referred to as China waste equipment for recycling in India please RoHS. All products produced and sold for China visit the below web link. market have to meet China RoHS request. http://www.india.philips.com/about/sustainability/ RoHS recycling/index.page PBDE Cr(VI) ×...
Page 28
8. Regulatory Infomation Information for U.K. only How to connect a plug The wires in the mains lead are coloured in WARNING - THIS APPLIANCE MUST BE accordance with the following code: EARTHED. This apparatus is supplied with an approved moulded 13A plug.
No manufacturer can guarantee the types of bright dot defects. that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains acceptable defect levels for each type.
Page 30
9. Customer care and warranty Proximity of Pixel Defects Note A red or blue bright dot must be more than 50 Because pixel and sub pixels defects of the percent brighter than neighboring dots while same type that are near to one another may be a green bright dot is 30 percent brighter than neighboring dots.
9. Customer care and warranty 9.2 Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Country Price €...
Do not perform any troubleshooting steps Philips customer service representative. Disconnect the monitor from mains power source immediately for safety Common Problems Contact with Philips customer service No Picture (Power LED not lit) representative immediately. Make sure the power cord is plugged into Imaging Problems the power outlet and into the back of the monitor.
LED Setup in OSD main Controls. Image appears blurred, indistinct or too dark For further assistance, refer to the Consumer Adjust the contrast and brightness on Information Centers list and contact Philips On-Screen Display. customer service representative. An "after-image", "burn-in" or "ghost image"...
Page 36
This may affect your warranty conditions. PC, workstation or Mac? Yes. All Philips LCD monitors are fully compatible with standard PCs, Macs For normal cleaning, use a clean, soft and workstations. You may need a cable cloth.
Page 37
10. Troubleshooting & FAQs your monitor pops out “Attention” to Play? show the unlock/lock status as shown below illustrators. Yes, the monitors are Plug-and-Play compatible with Windows 8.1/8/7, Mac OSX. Attention Monitor control unlocked in, or After Image, or Ghost Image in LCD panels? Uninterrupted display of still or static Attention...
Need help?
Do you have a question about the Brilliance 241P6EPJEB/00 and is the answer not in the manual?
Questions and answers