hit counter script
Download
Share
Print this page
Acer TravelMate TMP215-52 Lifecycle Extension Manual
  1. Manuals
  2. Brands
  3. Acer Manuals
  4. Laptop
  5. TravelMate TMP215-52
  6. Lifecycle extension manual

Acer TravelMate TMP215-52 Lifecycle Extension Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
TravelMate P2/ TMP215-52/ TMP215-52G/
TravelMate P215-52/ TravelMate P215-52G/
TMP50-52/ TMP50-52G
LIFECYCLE EXTENSION
GUIDE

Advertisement

loading
Need help?

Need help?

Do you have a question about the TravelMate TMP215-52 and is the answer not in the manual?

Questions and answers

Related Manuals for Acer TravelMate TMP215-52

Summary of Contents for Acer TravelMate TMP215-52

  • Page 1 TravelMate P2/ TMP215-52/ TMP215-52G/ TravelMate P215-52/ TravelMate P215-52G/ TMP50-52/ TMP50-52G LIFECYCLE EXTENSION GUIDE...

  • Page 2: Table Of Contents

    Disassembly Procedures ........1-1 Troubleshooting ........1-40 FRU (Field Replaceable Unit) List .

  • Page 3: Disassembly Procedures

    Disassembly Procedures Safety Guidelines This chapter contains step by step procedures on how to remove and de-install components from the computer. Use the following safety guidelines to ensure your personal safety. Each procedure included in this chapter assumes that you are preparing your computer for recycling and disposal.
  • Page 4 WEEE Annex VII Component These components are classified as requiring selective treatment: Battery pack  WLAN module  DIMM modules  SSD module  LTE module  Touchpad module  USB board  Mainboard  RTC battery  LCD panel ...
  • Page 5 Pre-disassembly Instructions Do the following prior to starting any maintenance procedures: 1. Place the system on a stable work surface. 2. Remove AC adapter (A) from the system and peripherals (Figure 1-1). 3. Remove all cables from system. Figure 1-1. AC Adapter Outlet 4.
  • Page 6 Base Cover Removal 1. Remove twelve (12) screws from the base cover (Figure 1-3). Figure 1-3. Base Cover Removal 2. Carefully pry up the base cover starting from the upper side to release the latches. Then continue releasing the remaining latches on the left, right, and bottom sides (Figure 1-4).
  • Page 7 3. Grasp and remove the base cover from the system (Figure 1-5). Figure 1-5. Base Cover Removal Disassembly Procedures...
  • Page 8 Battery Pack Removal Prerequisite: Base Cover Removal 1. Find the battery pack (A) in the system (Figure 1-6). 2. Detach the tape (B) securing the battery cable to the mainboard connector (Figure 1-6). 3. Detach the transparent mylar (C) securing the fan and battery cables (Figure 1-6).
  • Page 9 5. Release the battery pack from the guide pins (E) and remove the battery pack (A) from the system (Figure 1-8). WEEE Annex VII Component: Battery Pack Figure 1-8. Battery Pack Removal IMPORTANT: Follow local regulations for battery disposal. Disassembly Procedures...
  • Page 10 WLAN Module Removal Prerequisite: Battery Pack Removal 1. Find the WLAN module (A) on the top assembly (Figure 1-9). Figure 1-9. WLAN Module Location 2. Disconnect the WLAN antennas cables from the WLAN module connectors (B) (Figure 1-10). Then remove the WLAN antennas cables (C) from the cable guides as shown in Figure 1-10.
  • Page 11 4. Remove the WLAN module from the mainboard connector (D) (Figure 1-11). WEEE Annex VII Component: WLAN Module Figure 1-11. WLAN Module Removal Disassembly Procedures...
  • Page 12 DIMM Modules Removal Prerequisite: Battery Pack Removal 1. Find the DIMM module (A) in the system (Figure 1-12). 2. Push the DIMM module clips (B) outwards (Figure 1-12). Figure 1-12. DIMM Module Removal 3. Remove the DIMM module from the mainboard connector (C) (Figure 1-13).
  • Page 13 4. Repeat steps 1~3 to remove another DIMM module. Disassembly Procedures 1-11...
  • Page 14 SSD Module Removal Prerequisite: Battery Pack Removal 1. Remove one (1) screw securing the SSD module in place (Figure 1-14). Figure 1-14. SSD Module Removal 2. Remove the SSD module (A) from the mainboard connector (B) (Figure 1-15). WEEE Annex VII Component: SSD Module Figure 1-15.
  • Page 15 HDD Module Removal (HDD SKU Only) Prerequisite: Battery Pack Removal 1. Disconnect the HDD cable from the mainboard connector (A) (Figure 1-16). 2. Remove four (4) screws (B) securing the HDD bracket (Figure 1-16). Figure 1-16. HDD Module Removal 3. Remove the HDD module assembly (C) from its compartment (Figure 1-17).
  • Page 16 4. Disconnect the HDD cable from the HDD module connector (D) (Figure 1-18). Figure 1-18. HDD Module Removal 5. Remove four (4) screws (E) from the HDD bracket (Figure 1-19). Figure 1-19. HDD Module Removal 6. Remove the HDD module from its bracket. 1-14 Disassembly Procedures...
  • Page 17 LTE Module Removal (LTE SKU Only) Prerequisite: Battery Pack Removal 1. Find the LTE module (A) on the top assembly (Figure 1-20). 2. Disconnect the MAIN antenna cable (blue-color) from the LTE MAIN pin (Figure 1-20). 3. Disconnect the AUX antenna cable (yellow-color) from the LTE AUX pin (Figure 1-20).
  • Page 18 5. Remove the LTE module from the mainboard connector (B) (Figure 1-21). WEEE Annex VII Component: LTE Module Figure 1-21. LTE Module Removal 1-16 Disassembly Procedures...
  • Page 19 Touchpad Module Removal Prerequisite: Battery Pack Removal 1. Slightly lift the keyboard FPC, and then disconnect the touchpad FFC (A) from the touchpad module and mainboard connectors (Figure 1-22). 2. Disconnect the fingerprint FFC (B) from the touchpad module and mainboard connectors (Figure 1-22).
  • Page 20 3. Peel off and remove the touchpad conductive tape (C) from the touchpad module and top assembly (Figure 1-23). Figure 1-23. Touchpad Board Removal 4. Remove two (2) screws securing the touchpad module in place (Figure 1-24). Figure 1-24. Touchpad Board Removal 1-18 Disassembly Procedures...
  • Page 21 5. Using the screwdriver, push the guide pins (D) firmly to release them from the top assembly (Figure 1-25). 6. With one hand is placed underneath the touchpad module, push the touchpad module slightly to disengage it from the bottom latches (E), and then remove the touchpad module (F) from the top assembly (Figure 1-25).
  • Page 22 LCD Module Removal (HDD SKU Only) Prerequisite: Battery Pack Removal 1. Disconnect the WLAN antennas cables from the WLAN module connectors (A) (Figure 1-26). 2. Remove the WLAN antennas cables (B) from the cable guides as shown in Figure 1-26. 3.
  • Page 23 5. Remove four (4) screws securing the LCD hinges in place (Figure 1-27). Figure 1-27. LCD Module Removal 6. Lift the top assembly until it is fully open (Figure 1-28). Figure 1-28. LCD Module Removal Disassembly Procedures 1-21...
  • Page 24 7. Close the top assembly and lift both LCD hinges until they are fully extended (Figure 1-29). Figure 1-29. LCD Module Removal 8. Open the top assembly again, and then pull it backwards to remove the top assembly away from the LCD module (Figure 1-30).
  • Page 25 LCD Module Removal (LTE SKU Only) Prerequisite: Battery Pack Removal 1. Disconnect the tuner antenna cable from the LTE board connector (A) (Figure 1-31). 2. Unroute the tuner antenna cable from the guide on the top assembly (Figure 1-31). Figure 1-31. LCD Module Removal 3.
  • Page 26 5. Disconnect the WLAN antennas cables (C) from the WLAN module connectors (Figure 1-33). 6. Unroute the LTE and WLAN antennas cables from the guides on the top assembly (Figure 1-33). Figure 1-33. LCD Module Removal 7. Disconnect the eDP cable from the mainboard connector (D) (Figure 1-34).
  • Page 27 9. Remove four (4) screws securing the LCD module in place (Figure 1-35). Figure 1-35. LCD Module Removal 10. Place the device on a flat surface, top assembly facing up (Figure 1-36). 11. Lift the top assembly until it is fully open (Figure 1-36).
  • Page 28 12. Close the top assembly and lift both LCD hinges until they are fully extended (Figure 1-37). Figure 1-37. LCD Module Removal 13. Open the top assembly again, and then pull it backwards to remove the top assembly away from the LCD module (Figure 1-38).
  • Page 29 USB Board Removal Prerequisite: WLAN Module Removal 1. Disconnect the USB board FFC (A) from the mainboard and USB board connectors (Figure 1-39). 2. Remove one (1) screw securing the USB board in place (Figure 1-39). Figure 1-39. USB Board Removal CAUTION: USB board FFC (Flexible Flat Circuit) can be damaged if removed while the mainboard connector and the USB board connector are locked.
  • Page 30 3. Remove the USB board (B) from the top assembly (Figure 1-40). WEEE Annex VII Component: USB Board Figure 1-40. USB Board Removal 1-28 Disassembly Procedures...
  • Page 31 Mainboard Removal Prerequisite: Ensure that the WLAN Module, DIMM Modules, Fan, Heatsink, and SSD Module have been disassembled prior removing the mainboard. 1. Remove two (2) screws (A) securing the right side of LCD hinge in place (Figure 1-41). Figure 1-41. Mainboard Removal 2.
  • Page 32 3. Close the top assembly and lift the right side of LCD hinge until it is fully extended (Figure 1-43). Figure 1-43. Mainboard Removal 4. Peel off and remove the tape (B) securing the keyboard FPC (Figure 1-44). Figure 1-44. Mainboard Removal 5.
  • Page 33 11. Disconnect the eDP cable from the mainboard connector (I) (Figure 1-45). 12. Disconnect the speaker cable from the mainboard connector (J) (Figure 1-45). 13. Disconnect the NFC FFC from the mainboard connector (K) (Figure 1-45). 14. Disconnect the backlight FFC from the mainboard connector (L) (Figure 1-46).
  • Page 34 17. Remove the mainboard (O) from the top assembly (Figure 1-47). WEEE Annex VII Component: Mainboard Figure 1-47. Mainboard Removal CAUTION: USB board FFC (Flexible Flat Circuit), touchpad FFC, fingerprint FFC, and keyboard FPC (Flexible Printed Circuit), can be damaged if removed while the mainboard connectors are locked.
  • Page 35 RTC Battery Removal Prerequisite: SSD Module Removal 1. Disconnect the RTC battery cable from the mainboard connector (A) (Figure 1-49). 2. Unroute the RTC battery cable from the cable guide (B) (Figure 1-49). 3. Using plastic tweezers, carefully pry to detach the adhesive tape underneath the RTC battery (C).
  • Page 36 LCD Bezel Removal Prerequisite: LCD Module Removal (HDD SKU Only) LCD Module Removal (LTE SKU Only) 1. Pry the LCD bezel from the bottom side to release latches (Figure 1-50). Figure 1-50. LCD Bezel Removal 2. Continue along the left side of the bezel (Figure 1-51).
  • Page 37 3. Continue along the upper side of the bezel (Figure 1-52). Figure 1-52. LCD Bezel Removal 4. Continue along the right side of the bezel until all the latches have been released (Figure 1-53). Then lift and remove the bezel from LCD module. Figure 1-53.
  • Page 38 LCD Panel Removal Prerequisite: LCD Bezel Removal 1. Pry slightly to access the double-sided mounting tape (A) underneath the LCD panel (B). Then pull to detach the double-sided mounting tape from the LCD cover. Repeat the same procedure to remove the double-sided mounting tape on another side of the LCD panel (Figure 1-54).
  • Page 39 2. Carefully turn the LCD panel over so that the display panel is facing down on a flat surface. Then detach the mylar tape (C) securing the eDP cable to the LCD panel (Figure 1-55). Figure 1-55. LCD Panel Removal 3.
  • Page 40 4. Disconnect the eDP cable from the LCD panel connector (E) (Figure 1-57). Figure 1-57. LCD Panel Removal 5. Remove the LCD panel. CAUTION: Make sure the eDP cable is moved away from the device to avoid damage during LCD Panel removal. 1-38 Disassembly Procedures...
  • Page 41 Top Assembly Removal (Keyboard Removal) Prerequisite: HDD SKU: Ensure that the USB Board, Speakers, Touchpad Module, and LCD Module have been disassembled prior removing the top assembly. LTE and/or NFC SKUs: Ensure that the USB Board, Speakers, NFC Module, Touchpad Module, and LCD Module have been disassembled prior removing the top assembly.

  • Page 42: Troubleshooting

    Troubleshooting This chapter shows you how to deal with common system problems. Read it before calling a technician if a problem occurs. Solutions to more serious problems require opening up the computer. Do not attempt to open the computer yourself; contact your dealer or authorized service center for assistance.

  • Page 43: Fru (Field Replaceable Unit) List

    FRU (Field Replaceable Unit) List Please contact your local service center to find out how to obtain the part or replace your device. FRU (Field Replaceable Unit) List 1-41...

  • Page 44: Exploded Diagrams

    Exploded Diagrams Figure 1-59. System Exploded Diagram Table 1-2. System Exploded Diagram Description Acer Part No. Top Assembly 6B.VLKN7.001 USB Board FFC 50.VMNN7.002 1-42 Exploded Diagrams...
  • Page 45 Table 1-2. System Exploded Diagram Description Acer Part No. USB Board 55.VMNN7.001 HDD Cable 50.VLEN7.001 HDD Bracket 33.VMNN7.001 HDD Module KH.01K01.067 Speakers 23.VLLN7.002 Touchpad Module 56.VMNN7.001 Fingerprint FFC 50.VLVN7.001 Touchpad FFC 50.VMNN7.001 Battery Pack KT.0030G.020 DIMM Module KN.4GB07.036 23.VLLN7.001 Heatsink 24.VLLN7.001...
  • Page 46 Figure 1-60. LCD Assembly Exploded Diagram Table 1-3. LCD Assembly Exploded Diagram Description Acer Part No. LCD Bezel 60.VMNN7.003 LCD Panel KL.1560D.035 LCD Hinge R 33.VMNN7.002 LCD Hinge L 33.VMNN7.003 WLAN Antenna (MAIN+AUX) 50.VMNN7.005 Camera Module KS.0HD0Q.004 eDP Cable 50.VMNN7.008 LCD Cover 60.VMNN7.002...

  • Page 47: Software Update

    Software Update Updating your software Please visit http://go.acer.com/?id=17883 Software Update 1-45...

  • Page 48: Personal Data Removal

    Personal Data Removal Removing your personal data There are three options to choose from: Option 1: Select Start > Settings > Update & Security > Recovery. Under  Reset this PC, select Get started. Open Recovery settings. Option 2: Restart your PC to get to the sign-in screen, then press and hold down ...

This manual is also suitable for:

Travelmate p2Travelmate tmp215-52gTravelmate p215-52Travelmate p215-52gTravelmate tmp50-52Travelmate tmp50-52g