DC power cord for normal operation. 1.1 Safety precautions and • Please use approved power cord maintenance provided by Philips all the time. If your power cord is missing, please Warnings contact with your local service Use of controls, adjustments or center.
Page 4
1. Important degrees. If the -5 degree downward • Oil-based cleaning solutions may tilt angle maximum is exceeded, the damage the plastic parts and void monitor damage will not be covered the warranty. under warranty. • Unplug the monitor if you are not • Do not knock or drop the monitor going to use it for an extensive during operation or transportation.
1. Important Uninterrupted display of still or 1.2 Notational Descriptions static images over an extended The following subsections describe period may cause “burn-in”, also notational conventions used in this known as “after-imaging” or “ghost document. imaging”, on your screen. • “Burn-in”, “after-imaging”, or Notes, Cautions and Warnings “ghost imaging”...
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back...
S Line 241S9 V line Quick Start Register your product and get support at www.philips.com/welcome 2. Hold the monitor base stand with both hands and firmly insert the Power base stand into the base column. * HDMI * VGA...
2. Setting up the monitor Connecting to your PC 2.2 Operating the monitor Description of the control buttons 2 3 4 AC power input HDMI input VGA input HDMI audio out Kensington anti-theft lock Connect to PC 1. Connect the power cord to the back of the monitor firmly.
Page 9
On-Screen Display. You can use On-Screen Display (OSD) is a feature this as a reference when you want to in all Philips LCD monitors. It allows an work your way around the different end user to adjust screen performance adjustments later on.
2. Setting up the monitor Resolution notification 2.3 Remove the Base Assembly This monitor is designed for optimal for VESA Mounting performance at its native resolution, Before you start disassembling the 1920 x 1080. When the monitor is monitor base, please follow the powered on at a different resolution, an instructions below to avoid any possible alert is displayed on screen: Use...
Page 11
2. Setting up the monitor Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation. 100mm 100mm 0° 90° -5° * Display design may differ from those illustrated. Warning • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward...
SmartImage is an exclusive, leading This mode significantly enhances edge Philips technology that analyzes readability and productivity when the content displayed on your screen. you're working with spreadsheets, Based on a scenario you select,...
Developed for wellbeing, content. SmartContrast dynamically Philips LowBlue Mode setting uses controls contrast and adjusts a smart software technology to backlighting for clear, crisp, bright...
5.Technical Specifications 5. Technical Specifications Picture/Display 241S9L: VA Monitor Panel Type 241S9: IPS technology Backlight W-LED Panel Size 23.8" W (60.5 cm) Aspect Ratio 16:9 Pixel Pitch 0.275(H) mm x 0.275(V) mm 241S9L: 3000:1 Contrast Ratio (typ.) 241S9: 1000:1 Optimum Resolution 1920 x 1080 @ 60 Hz Viewing Angle 178°...
Page 16
5.Technical Specifications AC Input AC Input AC Input Heat Dissipation* Voltage at Voltage at Voltage at 100VAC , 60Hz 115VAC , 60Hz 230VAC , 50Hz 65.87 BTU/hr 65.19 BTU/hr 66.55 BTU/hr Normal Operation (typ.) (typ.) (typ.) Sleep (Standby mode) 1.02 BTU/hr 1.02 BTU/hr 1.02 BTU/hr Off mode...
Page 17
500 to 1060hPa (Non-operation) Environmental and energy ROHS Packaging 100% recyclable Specific Substances 100% PVC BFR free housing Cabinet Color White/Black Finish Texture Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
6.Power Management Note 6. Power Management This data is subject to change without notice. If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
Pixel Defect Policy sub pixels together appear as a single white pixel. When all are dark, the three Philips strives to deliver the highest colored sub pixels together appear as a quality products. We use some single black pixel. Other combinations...
Page 21
Red + Green = Yellow of the same type that are near to one Green + Blue = Cyan (Light Blue) another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel).
Page 22
In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
• Contact with Philips customer • First, ensure that the power button service representative immediately. on the front of the monitor is in the...
Page 25
Service contact information listed images over an extended period in Regulation & Service Information may cause "burn-in", also known as Manual and contact Philips customer "after-imaging " or "ghost imaging", service representative. on your screen. "Burn-in", "after- * Functionality different according to imaging", or "ghost imaging"...
Philips LCD monitor. the panel surface side. This may affect your warranty conditions. • Turn on your monitor and then turn on your PC.
Page 27
PC, workstation or Mac? may result in severe “burn-in” or “after- Ans.: Yes. All Philips LCD monitors are image” or “ghost image” symptoms fully compatible with standard that will not disappear and cannot be PCs, Macs and workstations.
Page 28
Q14: Where can I find Regulation & Service Information Manual mentioned in EDFU? Ans.: Regulation & Service Information Manual can be download on the Philips website support page.
Page 29
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the S Line 241S9 and is the answer not in the manual?
Questions and answers