2 - 1 TECHNICAL SPECIFICATIONS GENERAL WIRELESS Mains voltage -/22/93 : 230 V -/05/79 : 240 V Wireless standard : 802.11g -/37 : 120 V (backward compatible to 802.11b) Mains frequency Wireless security : WEP 64 or 128bit -/05/22/79/93 : 50 Hz WPA=PSK -/37 : 60 Hz Frequency range...
Page 11
4 - 1 4 - 1 DISASSEMBLY INSTRUCTION 1. Remove Stand 3. Separate Front and Back Cabinet. 4. Remove Core Pre-assembly a. remove screws T3x20 - 6 pcs. a. remove AC cord cover - screw T3x8 2 pcs. b. remove screw M3x10 - 1 pc. (Aux Jack) Step2 Lift up the stand Step1...
5.3 EEPROM Test Ethernet controller WiFi card Press Press STOP STOP 1 = pass 0 = fail VOL - VOL + Philips Philips Display shows Display shows Philips Philips Key Test OK RC6 Test OK (or fail) (or fail) VOL -...
Page 15
5 - 2 5 - 2 SERVICE TEST PROGRAM To exit Service Test Mode, power off the set. 6. WiFi SETTING 7. FLASH 8. FAN CONTROL 9. INFORMATION Press Press Press Display shows Display shows Display shows Display shows 6. WiFi Setting 7.
Center before you start the upgrade 1. How to download the software to your computer procedure. This information is also useful in case you need to call Philips Customer Care Center. 1. Click the link to save the software on your computer.
Page 17
5 - 4 5 - 4 SOFTWARE UPGRADING PROCEDURE 7. It takes around 5 mins to complete the fi rmware upgrade for the Audio Center. 8. When done, the Audio Center will go to the HD mode automatically. Turn on the Audio Station (paired earlier), the Audio Center will upgrade the Station wireless automatically.
5 - 5 5 - 5 CD DATABASE UPGRADING PROCEDURE The CD Database is provided quarterly on the in- 4. The Audio Center starts update the Audio’s 5. The fi le is starting to transfer to the Audio Center. ternet. There are 2 ways to update the embedded embedded CDDB automatically.
13 - 1 13 - 1 HAS MODULE This module can only be repaired on component level at authorized service workshop. In case of defects please replace the entire board resp. the WiFi Card. For sets produced before week 542 3103 308 68101 ..HAS Printed Board Assembly 2822 062 00097 ..WMOD WIFIG MPCI MP-G-AG-01 For sets produced in or after week 542...
15 - 2 ACCESSORIES LIST 3141 078 70071 CD ROM INSTALL SW (WACS700/12) /05, /22 3141 078 70231 CD ROM INSTALL SW (WACS700/37) 3141 078 70241 CD ROM INSTALL SW (WACS700/93) 2422 076 00687 ANT FM DIP 2422 076 00569...
When power up, the processor/MCU in Front Board runs program from its flash memory and shows messages on LCD (e.g. “PHILIPS” “Booting up, pls wait”). Mean while it will enable the power for Module board to let the 2 processors/MCUs to run their program from flash/SDRAM/HDD.
Page 65
17 - 2 ANNEX 1 Booting up and Architecture...
18 - 1 REVISION LIST Version 1.0 (3141 785 30500) • Draft release Version 1.1 (3141 785 30501) • First release in Audio Website Version 2.0 (3141 785 30502) • Add new version - /93. • Chapter 2 Technical Specifi cation is adapted. •...
Need help?
Do you have a question about the WACS700 and is the answer not in the manual?
Questions and answers