LG CL88 - Mini Hi-Fi System Simple Manual

Also See for CL88:

Table of Contents

Package Contents

USB 1 Port
You can play sound files by connecting the USB device.
(Standby)
Turns the power on or off.
Display window
F (Function)
Selects the function and input source.
USB 2 Port
You can play sound files by connecting the USB device.
MASTER VOLUME

(Remote sensor)
MIC (Microphone) 1/2 jack
AUX IN 1 jack
KEY CHANGER ( )
Changes the key to suit your vocal range.
VOICE CANCELLER
You can reduce the vocal tones during music playback from various input sources.
VOCAL EFFECTS
Selects various vocal effects mode.
TWIN
Connects two speakers for TWIN mode in WIRELESS PARTY LINK.
DJ LOOP
Selects DJ LOOP mode.
(DJ LOOP mode can use during CD/USB playback.)
(Play/Pause)

Starts or pauses playback.
Selects stereo/mono.
(Skip/Search)
Skips forward.
Searches for a section within a track/file.
Selects the radio stations.
PARTY ACCELERATOR MODE
Selects PARTY ACCELERATOR MODE.

Disc tray
PARTY ACCELERATOR lever
Slide the lever to create a party atmosphere.
USB REC / DEMO

Records to USB.
Stops Recording.
In power off status, if you press USB REC / DEMO,
show DEMO mode.
SPECIAL EQ / BASS BLAST (or BASS BLAST+)
Chooses special equalizer.
Press and hold to select BASS (or BASS+) effect directly.
(Stop) / RDS
Stops playback or cancels DELETE function.
Radio Data System
(Skip/Search)
Skips backward.
Searches for a section within a track/file.
Selects the radio stations.
(Open/Close)
Opens and closes the disc tray.

CLUB, DRUM, USER (DJ PAD)
Selects CLUB, DRUM or USER sound effect to mix.
(If you want to use USER, you have to register a source with "LG XBOOM" app.)
1, 2, 3, 4 (DJ PAD)
Press a desired sound pad.
DJ SCRATCHER / LEVEL CONTROL & SEARCH

Power cord
ANTENNA (FM)
AUX IN 2 (L/R)
SPEAKER LIGHTING SYSTEM
Connect the speaker lighting cables.
SPEAKERS connector

Download the LG XBOOM App to your device. (Android only)

For more information, download the online owner's manual. http://www.lg.com

Power Requirements	Refer to the main label on the unit.
Power Consumption	Refer to the main label on the unit.
Power Consumption	Networked standby: 0.5W (If all network ports are activated.)
Dimensions (W x H x D)	Approx. 450.0 mm x 167.0 mm x 332.0 mm
Bus Power Supply (USB)	5 V 500 mA
Amplifier (Total RMS output power)	2,900 W RMS

Design and specifications are subject to change without notice.

Using the Ferrite Core
Wind power cord cable around the ferrite core twice.

When you use the multiple socket, it is advisable to use 15 A socket. 10 A socket may cause power off due to lack of power supply
Do not place object on the speakers. This can result in objects falling and causing property damage.
Install the speaker on a non-slip surface. The vibration caused by the strong output can shake and move the speakers.
Avoid turning up max volume in a small enclosed space. The powerful and intense output of the speakers can shake the ceiling and cause objects in the room to fall.
To protect from hearing damage, keep a safe sufficient distance from the speaker. The overwhelming sound from the speaker. The overwhelming sound from the speaker may cause a person's hearing distance.
Allow more than 20 cm of free space between the main set and the speakers when you install the main set on the ground.
High sound pressure from the speakers can make the set vibrate which can disturb the CD playback.
Connect the power cord to wall outlet directly if possible. Or when you use an extension cable, it is highly recommended to use an extension cable of 110V/15A or 230V/15A, otherwise the unit may not operate properly because of the lack of power supply.
Do not overload the extension cord with excessive electrical load.

Do not look directly at the light emitting part when the LIGHTNING is turned on.
If the illumination brightness is glaring, switch on the room lights or turn off the LIGHTNING of the unit.