Specifications__________________________________________________________________________________________ Introduction The Philips Sleep & Wake-Up Light helps you wake up more pleasantly. If the Sunrise Simulation is active (default is 30 minutes), the light intensity of the lamp gradually increases to the set level and the light color changes from deep morning red to bright daylight.
10 Adapter 11 Small plug Intended use The Philips Sleep & Wake-up Light is intended to give you a more natural and refreshed wake up and a relaxed feeling before falling asleep. This is not a general illumination product. The effects of the Sleep & Wake-Up Light The Philips Sleep &...
Page 8
English Warning - Never use the appliance if the lamp housing is damaged, broken or missing. - If the adapter, cord or appliance has been damaged in any way, liquid has spilled or objects have fallen into and/or onto the appliance, the appliance has been exposed to rain or moisture, does not operate normally or has been dropped or damaged, it should not be operated.
- GB 7000 Luminaires - GB 8898 Audio, video and similar electronic apparatus - GB 4943 Information technology equipment Electromagnetic fields (EMF) This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields. Display icons Wake-up profile Display off...
English Snooze/Midnight Light Breathing rhythms Display Navigating the menu On the display you can select and set the wake-up profile, bedside light, settings, sound (source) or the unwind program. Note: All your personalized settings and profiles will be permanently stored in the memory, they will not be erased by removing the adapter from the electrical outlet.
English Light intensity of the wake-up profile The lamp of the appliance simulates a sunrise. Like a sunrise, the brightness of the lamp increases gradually. During this wake-up curve, the color of the light changes from soft red to warm orange to bright yellow. You can choose one of the 25 light intensity levels.
English Press the bedside lamp button on the display to switch on the bedside lamp. Note: You can increase and decrease the brightness intensity. You can select a brightness between 1 (low) to 25 (high). The default brightness setting is 18. To switch it off press the cross button in the menu.
English Audio feedback If you do not want to hear clicks when you press an icon, press the audio feedback icon to turn off the audio feedback. You hear one click as a confirmation. To reactivate the audio feedback, press this icon again. Display Display brightness You can adjust the display brightness from level 1 to level 6.
English Radio You can listen to the FM radio with the Sleep & Wake-Up Light. If you have set the radio function in the setup wizard, it shows the selected radio station. You can manually change the radio station by selecting the FM frequency of another radio station.
English Note: You can deactivate the active wind-down program by tapping the top of the appliance. Sunset Simulation During the Sunset Simulation, the brightness of the light decreases gradually with colors changing from bright yellow to warm orange to soft red. You can set the duration and light intensity to start with.
English You can select one of seven relaxation programs with preset breathing rhythms. Each relaxation program has a different breathing rhythm. The program '4 breaths' is preset to 4 breaths per minute. Program '5 breaths' is preset to 5 breaths per minute. Each next program has one additional breath per minute.
English - To buy accessories or spare parts, visit www.philips.com or go to your Philips dealer. You can also contact the Philips Consumer Care Center in your country (see the international warranty leaflet for contact details). The following accessory is available: - Adapter HF20 CN-version:code 3000 038 90611.
Page 18
English Problem Solution When you have set an alarm, you will first see the light of the wake up curve. The alarm sound only starts playing when the set alarm time is reached. You can change the duration of the wake up light curve (see 'Duration of the wake-up profile').
To prevent the back-up alarm to go off when the power is removed (e.g. storage) just have the alarms disabled prior to powering down. Specifications Model HF3651 Rated input voltage adapter 100-240V Rated input frequency adapter 50/60Hz No-load power adapter <0.1W...
Page 20
English Main unit Luminaires Adapter Class 2 power supply Mode of operation Continuous Operating conditions Temperature +5°C to +35°C Relative humidity 15% to 90% (no condensation) Operating frequency 87.5 MHz - 108.0 MHz Storage conditions Temperature -20°C to +50°C Relative humidity 15% to 90% (no condensation)
Need help?
Do you have a question about the HF3651 and is the answer not in the manual?
Questions and answers