Related Manuals for Philips Q Line 65BDL3511Q
Summary of Contents for Philips Q Line 65BDL3511Q
- Page 1 Professional Display Solutions Q Line 65BDL3511Q 75BDL3511Q 86BDL3511Q User Manual (English) www.philips.com/welcome...
-
Page 2: Table Of Contents
3.3.4. Handling the remote control ..19 10.2. Troubleshooting ..........39 3.3.5. Operating range of the remote control ...........19 11. Technical Specifications ..........40 3.4. USB Cover ............20 Warranty policy for Philips Professional Display 3.5. AC Switch Cover ..........21 Solutions .................42 Connecting External Equipment ......22 Index ..................44 4.1. -
Page 3: Safety Instructions
When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. •... - Page 4 65BDL3511Q/75BDL3511Q/86BDL3511Q • Only the lifetime of the display stated in this specification is guaranteed if the display is used under the proper operation conditions. IMPORTANT: Always activate a moving screen saver program when you leave your display unattended. Always activate a periodic screen refresh application if the unit will display unchanging static content.
- Page 5 65BDL3511Q/75BDL3511Q/86BDL3511Q Warning: This equipment is compliant with Class A of EN55032/CISPR 32. In a residential environment this equipment may cause radio interference. Federal Communications Commission (FCC) Notice (U.S. Only) NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
- Page 6 65BDL3511Q/75BDL3511Q/86BDL3511Q Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).
- Page 7 65BDL3511Q/75BDL3511Q/86BDL3511Q Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows:+ 1. Remove fuse cover and fuse. 2.
- Page 8 65BDL3511Q/75BDL3511Q/86BDL3511Q China RoHS 根据中国大陆《电器电子产品有害物质限制使用管理办法》，以下部分列出了本产品中可能包含的有害 物质的名称和含量。 有害物质 部件名称 铅 镉 六价铬 多溴联苯 多溴二苯醚 汞 (Hg) (Pb) (Cd) (Cr (VI)) (PBB) (PBDE) 外壳 液晶显示屏 电路板组件* 电源适配器 电源线/连接线 遥控器 本表格依据SJ/T 11364 的规定编制。 电路板组件包括印刷电路板及其构成的零部件， 如电阻、 电容、 集成电路、 连接器等。 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572规定的限量要求以下。 表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572规定的限量要求。 上表中打“X”的部件， 应功能需要， 部分有害物质含量超出GB/T 26572规定的限量要求， 但符合欧盟 RoHS法规要求...
- Page 9 Please find out about the local regulations on how to dispose of your old display from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
- Page 10 For more information about E -waste please visit http://www.india.philips.com/about/sustainability/recycling/index.page and to know where you can drop off your waste equipment for recycling in India please contact on below given contact details.
- Page 11 65BDL3511Q/75BDL3511Q/86BDL3511Q Batteries For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation. Please contact your local authority for details on the collection and recycling schemes.
-
Page 12: Unpacking And Installation
65BDL3511Q/75BDL3511Q/86BDL3511Q Unpacking and Installation 2.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • As this product is high and heavy, the operation of moving the device is recommended to be performed by two technicians. •... - Page 13 65BDL3511Q/75BDL3511Q/86BDL3511Q • Place the display vertically and its weight should spread evenly on the surface. • Please keep vertically, no bending and torsion during moving the display.
-
Page 14: Package Contents
HDMI cable • USB Cover * The supplied power cord varies depending on destination. • Cable Clip x 3PCS • Philips logo plate Power Cord RS232 Cable RS232 Daisy Chain Cable IR Sensor Cable HDMI Cable Philips Logo plate USB Cover x 1... -
Page 15: Mounting On A Wall
65BDL3511Q/75BDL3511Q/86BDL3511Q 2.4. Mounting on a Wall To mount this display on a wall, a standard wall-mounting kit (commercially available) is required. It is recommended that you use a mounting interface that complies with TUV-GS and /or UL1678 standard in North America. Protective Sheet VESA Grid Table... -
Page 16: Mounting In Portrait Orientation
65BDL3511Q/75BDL3511Q/86BDL3511Q 2.5. Mounting in Portrait Orientation This display can be installed in portrait orientation. Rotate the display 90 degrees Counterclockwise. The “ ” logo should be on the right side when facing the display. 90° 90° NOTE: The working hour in portrait mode is 18 hours per day. 2.5.1. -
Page 17: Parts And Functions
65BDL3511Q/75BDL3511Q/86BDL3511Q Parts and Functions 3.1. Control Panel [ ] button [MENU] button Press this button to turn the display On or turn the Return to the previous menu while the OSD menu is On. display to standby mode. This button can also be used to activate the OSD menu when the OSD menu is Off. -
Page 18: Input/Output Terminals
65BDL3511Q/75BDL3511Q/86BDL3511Q 3.2. Input/Output Terminals RJ45 USB 2.0 Service Port PC LINE IN AUDIO OUT IR-OUT IR-IN 75BDL3511Q 65BDL3511Q 86BDL3511Q RS232 RS232 HDMI 1 IN HDMI 2 IN HDMI 3 IN DVI-I 100-240V 100-240V 50/60Hz 2.5A 50/60Hz 2.5A AC IN PC LINE IN AC power input from the wall outlet. -
Page 19: Remote Control
65BDL3511Q/75BDL3511Q/86BDL3511Q 3.3. Remote Control ] POWER button Turn the power On. 3.3.1. General functions Turn the power Off. [PLAY] buttons Fast Rewind/Play/Fast forward/Stop/Pause ] HOME button Access the OSD menu. ] SOURCE button Choose input source. Press [ ] or [ ] button to choose Network HDMI 1... -
Page 20: Id Remote Control
65BDL3511Q/75BDL3511Q/86BDL3511Q 3.3.2. ID Remote Control Press [ID] button. The red LED blinks twice. 1. Press [ID SET] button for more than 1 second to enter the Set the remote control ID if you intend to use this remote ID Mode. The red LED lights up. control on several different displays. -
Page 21: Inserting The Batteries In The Remote Control
65BDL3511Q/75BDL3511Q/86BDL3511Q 3.3.3. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Insert batteries with the correct polarity (+) and (-). 3. -
Page 22: Usb Cover
65BDL3511Q/75BDL3511Q/86BDL3511Q 3.4. USB Cover • Use the USB cover and screws to hide the USB stick. 65BDL3511Q 1. Release the screw as shown. Keep it in a suitable place. 2. Plug the USB stick. 3. Install the USB cover. 4. Use the screw provided to fix the USB cover. 75BDL3511Q/86BDL3511Q 1. -
Page 23: Ac Switch Cover
65BDL3511Q/75BDL3511Q/86BDL3511Q 3.5. AC Switch Cover cover the AC switch. • Use AC Switch Cover to 1. Install the AC Switch Cover. 2. Fix the AC Switch Cover with the screw in step1. 65BDL3511Q 75BDL3511Q/86BDL3511Q... -
Page 24: Connecting External Equipment
65BDL3511Q/75BDL3511Q/86BDL3511Q Connecting External Equipment 4.1. Connecting External Equipment (DVD/VCR/VCD) 4.1.1. Using HDMI video input RS232 RS232 HDMI 1 IN HDMI 2 IN HDMI 3 IN DVI-I [HDMI IN] HDMI Out DVD / VCR / VCD 4.2. Connecting a PC 4.2.1. Using DVI input [PC LINE IN] PC LINE IN RS232... -
Page 25: Connecting Multiple Displays In A Daisy-Chain Configuration
65BDL3511Q/75BDL3511Q/86BDL3511Q 4.3. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a menu board. 4.3.1. Display control connection Connect the [RS232 OUT] connector of DISPLAY 1 to the [RS232 IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 [RS232]... -
Page 26: Wire-Connecting To Network
65BDL3511Q/75BDL3511Q/86BDL3511Q 4.6. Wire-connecting to Network INTERNET ROUTER [RJ-45] [RJ-45] Network Settings: 1. Switch the router on and enable its DHCP setting. 2. Connect the router to this display with an Ethernet cable. Setup 3. Press [ ] HOME button on the remote control, then select Connect to network 4. -
Page 27: Operation
65BDL3511Q/75BDL3511Q/86BDL3511Q Operation 1 / 2 NOTE: The control button described in this section is mainly on the remote control unless specified otherwise. 5.1. Play multimedia files from USB device Return aaa1 aaa2 aaa3 1. Connect your USB device to the USB port on the display. xxx1 xxx2 xxx3... -
Page 28: Osd Menu
65BDL3511Q/75BDL3511Q/86BDL3511Q OSD Menu 6.2. OSD Menu Overview An overview of the On-Screen Display (OSD) structure is 6.2.1. Picture menu shown below. You can use it as a reference for further adjustment of your display. PICTURE Picture Mode Standard 6.1. Navigating the OSD Menu SCREEN Brightness AUDIO... -
Page 29: Screen Menu
65BDL3511Q/75BDL3511Q/86BDL3511Q Color temperature Clock Phase It is used to adjust the color temperature. Improves focus, clarity and image stability by increasing or decreasing this setting. The image becomes reddish as the color temperature decreases, and becomes bluish as the color temperature NOTE: VGA input only. -
Page 30: Audio Menu
65BDL3511Q/75BDL3511Q/86BDL3511Q Auto adjust Digital : audio from HDMI/DVI audio. Select to detect and adjust H position, V position, Clock, Audio reset Phase automatically. Reset all settings in the Audio menu to factory preset values. NOTE: VGA input only. 6.2.4. Tiling menu Screen reset Reset all settings in the Screen menu to factory preset values. -
Page 31: Network Menu
65BDL3511Q/75BDL3511Q/86BDL3511Q DHCP Example: 2 x 2 screen matrix (4 displays) H monitors = 2 displays Select the method to set LAN communication protocol. V monitors = 2 displays {Off} - manual key-in LAN communicaton protocol by user. {On} - auto configure LAN communicaton protocol. H monitors NOTE: IP address, Netmask and Gateway will gray out when DHCP is on. -
Page 32: Option Menu
65BDL3511Q/75BDL3511Q/86BDL3511Q Light Sensor RS-232 cable and set their Control ports to RS-232 too. Light sensor function is to adjust brightness automatically when ambient light changed. Human Sensor Set the display to turn on backlight if it does sensor human and turn off backlight after an amount of time specified The options are: {Off, 10 ~ 60} minutes. - Page 33 65BDL3511Q/75BDL3511Q/86BDL3511Q If the selected input has signal, set the system to display the NOTE: It is recommended that you set up the current date and time in the {Date and time} menu before using image automatically according to the search order of each option.
- Page 34 65BDL3511Q/75BDL3511Q/86BDL3511Q • If there are two schedule items programmed for the same Mode 4 [TCP on, WOL off, no auto on/off] time, the highest numbered schedule takes priority. For example, if schedule items #1 and #2 both set the display Power save modes to power on at 7:00 AM and off at 5:00 PM, then only schedule item # 2 will take effect.
- Page 35 65BDL3511Q/75BDL3511Q/86BDL3511Q USB Cloning Copy PD settings from one set to another. Import: Import settings from another set. Export: Export settings to another set. OPS Setting Set the OPS configuration under each power condition. • {Auto} - After selecting {Card OPS} for video source input, the OPS will be set to off when the display power is set to off, or set to on when the display power is set to on.
-
Page 36: Supported Media Formats
65BDL3511Q/75BDL3511Q/86BDL3511Q Supported Media Formats USB Multimedia Formats Video format Video Codec Resolution Bit Rate MPEG1/2 1080P@30fps 40Mbps H.264 4096*2160@60fps 135Mbps H.264 1080P@30fps 50Mbps WMV3 1080P@30fps 40Mbps Motion JPEG 1080P@30fps 40Mbps Audio format Audio Codec Sampling Rate Channel Bit Rate MPEG1/2 Layer1 16KHz-48KHz Up to 2 32Kbps-448Kbps MPEG1/2 Layer2 16KHz-48KHz... -
Page 37: Input Mode
65BDL3511Q/75BDL3511Q/86BDL3511Q Input Mode Timing support: Item Resolution H.Freq. (KHz) V.Freq. (Hz) 720×400 @70Hz DOS 31.469 70.087 640×480 @60Hz DMT 31.469 59.94 640×480 @67Hz MAC 66.667 640×480 @72Hz DMT 37.861 72.809 640×480 @75Hz DMT 37.5 800×600 @56Hz DMT 35.156 56.25 800×600 @60Hz DMT 37.879 60.317 800×600 @72Hz DMT... -
Page 38: Pixel Defect Policy
However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- &... -
Page 39: Dark Dot Defects
Pixel Defect Tolerances In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Philips Plasma / LCD- display must have pixel or sub-pixel defects exceeding the tolerances listed in the following table. -
Page 40: Cleaning And Troubleshooting
65BDL3511Q/75BDL3511Q/86BDL3511Q HOW TO AVOID MURA Although we can not guarantee the complete eradication of Mura every time, in general the appearance of Mura can be minimized by these methods: • Lower the backlight brightness • Use a screen saver • Reduce the ambient temperature around the unit 10. -
Page 41: Troubleshooting
65BDL3511Q/75BDL3511Q/86BDL3511Q 10.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of 2. Make sure the power switch is the display is not switched on. switched on. -
Page 42: Technical Specifications
65BDL3511Q/75BDL3511Q/86BDL3511Q 11. Technical Specifications Display: Item Specifications 65BDL3511Q 75BDL3511Q 86BDL3511Q Screen Size (Active Area) 1639 mm / 64.5 inch 1893 mm / 74.5 inch 2174 mm / 85.6 inch Aspect Ratio 16:9 16:9 16:9 Number of pixels 3840 (H) x 2160 (V) 3840 (H) x 2160 (V) 3840 (H) x 2160 (V) Pixel pitch... - Page 43 65BDL3511Q/75BDL3511Q/86BDL3511Q General: Item Specifications 65BDL3511Q 75BDL3511Q 86BDL3511Q Power Input 100 - 240V~, 50/60Hz 100 - 240V~, 50/60Hz 100 - 240V~, 50/60Hz Power Consumption (Max) 220 W 320 W 500 W Power Consumption (typ.) 165 W 180 W 360 W Power Consumption (Standby & <0.5 W <0.5 W <0.5 W...
-
Page 44: Warranty Policy For Philips Professional Display Solutions
LIMITED WARRANTY In the unlikely event the product requires service, we will arrange for your Philips product to be serviced free-of-charge within the warranty period, provided that the product was used in accordance with the user manual (e.g. in the intended environment). - Page 45 Warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow their warranty statement. Standard warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow the local warranty statement.
-
Page 46: Index
Index Warranty 41 Warranty policy for Philips Professional Display Solutions 42 Cleaning and Troubleshooting 38 Wire-connecting to Network 24 Connecting a PC 22 Connecting External Equipment 22 Connecting External Equipment (DVD/VCR/VCD) 22 Connecting Multiple Displays in a Daisy-chain Configuration 23... - Page 47 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the Q Line 65BDL3511Q and is the answer not in the manual?
Questions and answers