Direct Broadcast System, please refer to pages 8-9. After you hook up the VCR, please go to pages 10-11 to turn on the VCR. (The VR1010BP is illustrated here. The VR810BPH does not have S-VIDEO IN/OUT jacks.) Disconnect the antenna or cable from your TV.
Page 3
Set the CH3/CH4 switch on the back of the VCR to CH3 or CH4, whichever channel is not used or least used in your area. To operate your VCR with your TV, set the TV to the same channel. For example, when playing a tape, if the CH3/CH4 switch is set to CH3, the TV should be on channel 3.
• You can only program a timer recording for one channel at a time if you are not using the Controller. Set the VCR to the Cable Box/DBS output channel; set the CH3/CH4 switch to CH3 or CH4, whichever channel is not used or least used in your area, and set the TV to the same channel. Set your Cable Box/DBS to the channel you want to record.
CH3/CH4 switch. Set the TV to the Cable Box/DBS output channel. Then, with the VCR in VCR position (the VCR light will appear on the display panel), use the CH(annel) 8/9 button to select the channel you want to record at the VCR. Start the recording.
Use to watch a tape, to watch a program while recording it, or to watch a TV broadcast using the CH(annel) 8/9 or Number buttons to change channels at the VCR. The VCR light will appear on the display panel when the VCR is in VCR position. TV Position: Use to watch TV (changing channels at the TV) or to watch one program while recording another.
Cable Box or DBS receiver. Details are on pages 50-54. VIDEO IN Jack Connect a video cable coming from the VIDEO OUT jack of a cam- corder, a Cable Box/DBS, or another VCR here. Details are on pages 35 and 48. VIDEO OUT Jack...
The instructions on this page show you how to copy tapes. Different VCRs may operate differently. To duplicate a tape, make the connections shown, then follow steps 1-6. (You may use the AUDIO and VIDEO In jacks on the front of VCR 2 instead if you prefer.) VCR 1...
AUDIO OUT jack, connect only the white audio cable to the AUDIO OUT jack on the audio equipment and to the white AUDIO IN jack on the VCR. You will not use the red audio cable. On the VCR remote control, press the VCR button, then press the Number 0 button.
Cable Box/DBS during a timer recording. Leave your Cable Box/DBS turned on dur- ing a timer recording. Connect the Cable Box/DBS to the VCR as shown below. Set the TV to the Cable Box/DBS output channel. For more information, please read page 8. Or, refer to the owner’s manual of your Cable Box/DBS.
Page 11
TUNER SET UP INITIAL SET UP TAPE MANAGER SELECT: ,9 CONFIRM: OK END: MENU Press the PLAY 8 or STOP 9 button to select VCR SET UP, then press the OK/STATUS button. DSPC ON SCREEN MODE BLUE BACKGROUND TIMER REC SPEED...
Need help?
Do you have a question about the VR1010BP and is the answer not in the manual?
Questions and answers