Contents Your air purifier ������������������������������������������������������������������� 2 Product overview �������������������������������������������������������������������������������������������� 2 Controls overview �������������������������������������������������������������������������������������������3 Getting started ������������������������������������������������������������������� 3 Installing the filter �������������������������������������������������������������������������������������������3 Wi-Fi indicator ��������������������������������������������������������������������������������������������������4 Wi-Fi connection ��������������������������������������������������������������������������������������������4 Using the air purifier ��������������������������������������������������������� 4 Air quality light �������������������������������������������������������������������������������������������������4 Turning On and Off ����������������������������������������������������������������������������������������5 Changing the mode setting ���������������������������������������������������������������������6 Switching the display indicator ��������������������������������������������������������������...
Your air purifier Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at Philips�co�in/welcome� Product overview Air outlet Control panel Particle sensor NanoProtect filter Series 3 (FY2180/10) Back cover...
Controls overview Wi-Fi indicator Mode display: Auto ( Turbo ( Filter cleaning alert Gentle ( Filter replacement alert Sleep ( Light on/off button Filter status/ reset button Display switch button Mode switch button Power on/off button 2 Getting started Installing the filter Note: Make sure the air purifier is unplugged from the electrical outlet before installing the filter�...
3 seconds until you hear a beep� » The Wi-Fi indicator blinks orange� Follow the steps 3 in “First time connection” section� Note: Please check www�philips�com/cleanhome for the latest update of supported Operation System and devices� 3 Using the air purifier Air quality light After approximately 30 seconds, the particle sensor selects the color that corresponds to the surrounding air quality of airborne particles�...
PM2�5 refers to airborne particle pollutants smaller than 2�5 micrometers. PM2�5 level Air quality light color Air quality level ≤60 Blue Good 61-120 Blue-purple Fair 121-250 Purple-red Poor >250 Very poor IAI refers to the level of indoor air allergen� IAI level Air quality light color Air quality level...
• The air purifier operates in the • Touch and hold the button for auto mode with PM2�5 displayed 3 seconds to switch off the air on the screen� purifier� Changing the mode setting You can choose Auto mode, Turbo mode, Gentle mode or the Sleep mode by button �...
Switching the display indicator Note: • The appliance display PM2�5 level by default� Using the light on/off function You can touch the light on/off button manually to turn off all lights and the control panel� Touch any button to wake up all lights� With the light sensor: •...
Checking the filter status • Touch the filter status check/reset button to check the filter service life status� Icon color Display (%) Blue 16-100 Blue-purple 9-15 Purple-red Note: The appliance goes back to normal display if no operations after 3 seconds� 4 Cleaning and maintenance Note: •...
Cleaning the surface of the filter Clean the surface of filter with vacuum cleaner when the filter cleaning alert display on the screen� Pull the Pull the Clean the Put the Reattach back filter surface of filter back the back cover and from the the filter...
When the filter need to be replaced, the filter replacement alert lights up red� Replace the filter with Philips NanoProtect filter Series 3 (FY2180/10) , Please follow the step of Chapter “Installing the filter”� Touch and hold the Wash your...
Filter reset You can also replace the filter before filter replacement alert ( ) displays on the screen� After replacing a filter, you need to reset the filter lifetime counter manually� Touch the power Put the power Within 15 seconds after button for plug in the power power on, touch and...
6 Troubleshooting This chapter summarizes the most common problems you could encounter with the appliance� If you are unable to solve the problem with the information below, contact the Consumer Care Center in your country� Problem Possible solution • The filter replacement alert has been on continuously The appliance does not work but you have not replaced the corresponding filter�...
Page 15
Philips dealer or an authorized Philips service center� The filter may produce smell after being used for a while because of the absorption of indoor gases� It’s recommended that you reactivate the filter by putting it in direct sunlight for repeated use�...
Page 16
Problem Possible solution • If the router your purifier is connected to is dual – band and currently it is not connecting to a 2�4GHz network, please switch to another band of the same router (2�4GHz) and try to pair your purifier again�5GHz networks are not supported�...
Need help?
Do you have a question about the AC2959 and is the answer not in the manual?
Questions and answers