Contents 1 Get Support 12 Wireless and Networks 1.1 Identify and Register your TV 12.1 Home Network 1.2 TV Help and User Manual 12.2 Connect to Network 1.3 Consumer Care / Repair 12.3 Wireless and Network Settings 2 Software 13 Smart TV 2.1 Update Software 13.1 Setup Smart TV 2.2 Software Version...
Page 3
24.5 Wi-Fi Alliance 24.6 Other Trademarks 25 Open Source 25.1 Open Source Software 25.2 Open Source License 26 Disclaimer regarding services and/or software offered by third parties Index...
Identify your TV - TV model number and serial documentation that came with the TV. Or consult our number website www.philips.com/TVsupport and select You might be asked to provide the TV product model your country if needed. number and serial number. Find these numbers on...
back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice Update Software • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again.
Page 6
long as there are no recordings or other alarms scheduled). When the setting is disabled, the "Upgrade Now" / "Later" OSD will be shown.
4 - Search To open the Smart TV searches page. Quick Guide Middle Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote control, the batteries might be empty. To replace the batteries, open the battery compartment on the back of the remote control.
Warning Do not put any objects in front of IR sensor of the TV, it may block the IR signal. To open the Netflix App directly. With the TV switched on or from standby. Joystick - Local Control •...
• Position the TV where light does not shine directly Maximum 24 mm) on the screen. • 70PUT7605 • Position the TV up to 15 cm away from the wall. VESA MIS-F 300x300, M8 (Minimum 12 mm, • The ideal distance to watch Ultra HD TV is 2 to 5 Maximum 14 mm) times of its screen height.
Page 10
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.
Connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its Copy protection type and gives each device a correct type name.
Digital Audio Out - Optical Using Screen Mirroring Switch on Screen Mirroring Audio Out - Optical is a high quality sound connection. Press SOURCES > Screen Mirroring This optical connection can carry 5.1 audio channels. Share a Screen on TV If your device, typically a Home Theatre System 1 - Activate Screen mirroring on your mobile device.
Download the Philips TV Remote App from your favourite app store today. To Pause The Philips TV Remote App is available for iOS and To pause a broadcast, you need a USB compatible Android and is free of charge. Hard Drive with a minimum of 4GB disk space.
1 - Switch on the bluetooth device and place it within range of the TV. 2 - Select (Home) > Settings > All settings > Wireless and Networks and press (right) to enter the menu. 3 - Select Bluetooth > Search Bluetooth Device, and press OK.
Switch Source Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (Right) or (Left) and press OK. • To view the technical information of the connected device you are watching, press ...
channels Channels 1 - Select Start now and press OK. 2 - Select Update channels to only add new digital channels. 3 - Select Start and press OK to update channels. About Channels and Switch This can take a few minutes. Channels Quick reinstall ...
Page 17
frequency value to search for channels, Channel Update Message select Advanced. (Home) > Settings > Install Frequency step size Channels > Antenna installlation > Channel The TV searches for channels in steps of 8MHz. update message If this results in having no channels installed or if some channels are missing, you can search in smaller When new channels are found or if channels are steps of 1MHz.
Page 18
With Channel list copy, you can copy the channels If the country is correct continue with step 2. installed on one TV onto another Philips TV of the If the country is not correct, you need to start a same range. With Channel list copy, you avoid the reinstallation.
subtitles Subtitle on or Subtitle off . Alternatively Channel info you can select Automatic. Select Channel info to view the technical information Automatic of the channel. If language information is part of the digital broadcast and the broadcasted programme is not in your language (the language set on TV), the TV can show HbbTV on This Channel subtitles automatically in one of your preferred...
Page 20
Channel List Options Select Channel Range > OK > OPTIONS > Select channel range Open Option Menu Select a range of channels in a favourites channel To open the channel list option menu... list, once completed, press OK. •...
3 most used channels from the broadcasters’ default list will be appended after your favourite channels for Favourite Channels your preview. You need to add these channels into your favourite list to enable its operation (refer to "TV About Favourite Channels Guide"...
Page 22
the set is on TV mode. If a set-top box is being used, the teletext will be unavailable via TV. In that case, the set-top box’s teletext can be used instead. Text Options In Text/Teletext, press OPTIONS to select the following…...
Change Day TV Guide If the TV guide information comes from the broadcaster, you can press Channel up to view the schedule of one of the next days. Press Channel down to go back to the previous day. What You Need Alternatively, you can press ...
Page 24
Set a Recording You can set a recording in the TV Guide. To record a programme… 1 - Press TV GUIDE and select a future or ongoing programme. 2 - Press the colour key Record . To cancel a recording… 1 - Press ...
Schedule a Recording Recording and You can schedule a recording of an upcoming programme for today or a few days from today Pause TV (maximum of 8 days away). The TV will use the data from the TV Guide to start and end the recording. To record a programme…...
and press OK. To switch back to the actual TV broadcast, 5 - Select the channel to record from and press OK. press (Stop). 6 - Select the day of the recording and press OK. 7 - Set the start and end time of the recording. Select a button and use the ...
10.3 Photos Videos, Photos and Music View Photos 1 - Press SOURCES, select USB and 10.1 press OK. 2 - Select USB Flash Drive and press (right) From a USB Connection to select the USB device you need. 3 - Select Photo, you can press ...
Set the transition from one picture to the next. Time sync offset if the options are available. 10.4 Video Options Videos When browsing video files, press OPTIONS to… Play Videos List/Thumbnails View video files with list view or thumbnails view. To play a video on TV…...
ideal sound settings. • Audio out - Set the TV to play the sound on TV or Open TV Setting on the connected audio system. • Ambilight style** - Select one of preset Ambilight Menus styles. • Ambilight+hue** - Switch Ambilight+hue on or off. •...
Page 30
source video is applicable for PC application. HDR is (Home) > Settings > All settings > Picture > not supported in Monitor mode. The TV is able to play Backlight contrast HDR video in Monitor mode but no HDR processing Press the arrows ...
Page 31
Select Normal, Warm, or Cool to set the colour Hybrid Log Gamma, HDR10, HDR10+, and Dolby temperature for your preference. Vision but it is subject to the availability of such HDR format in content providers. Customise colour temperature Dynamic Contrast ...
Page 32
(Home) > Settings > All to 16:9 full screen. Picture content aspect ratio may settings > Picture > Expert mode change. settings > MPEG Artefact Reduction • Fill screen – automatically enlarges the picture to fill the screen. Picture distortion is minimal, subtitles Select Maximum, Medium, Minimum to have remain visible.
Page 33
settings > Sound > Sound style Press the arrows (up) or (down) to adjust the equalizer settings. The available sound styles are ... * Note: To restore the Personal mode to its original • AI mode - Select AI mode for intelligent switching of setting, select back to Sound style, then sound style based on audio content.
Page 34
• If you select Headphones, the sound will be played settings > Sound > Advanced > Digital out delay through headphones. For some Home Theatre Systems you might need to • If you select TV Speakers + Headphones, the sound adjust the audio sync delay to synchronise the audio will be played through TV speakers and to the video.
Page 35
Switch the storage of third-party cookies, site data and cache from HbbTV services on or off. (Home) > Settings > All Settings > Channels > HbbTV settimgs > Clear approved app listing Allow you to clear the list of HbbTV applications that you have allowed to be launched on the TV.
Page 36
• Resolution: 3840 x 2160 • TV switches off if receiving a TV signal but you don't • Frame rate (Hz): 50Hz, 59.94Hz, 60Hz press a key on the remote control during a 4 hour • Video data sub-sampling (bit-depth) period.
Page 37
Universal Access Settings Play demo video (Home) > Settings > All settings > Universal (Home) > Apps > Demo me > Manage demos > access Play With Universal Access switched on, the TV is Select a demo video file and play. prepared for use for the deaf, hard of hearing, blind or Copy demo file partially sighted people.
Page 38
PIN code when you try to start an 18+ language > Clock > Auto clock mode rated app. This lock is only valid for 18+ rated apps from the Philips apps. • The standard setting for the TV clock is Automatic. The time information comes from the broadcasted UTC - Coordinated Universal Time information.
Page 39
language > Clock > Time zone Select one of the time zones. Set the TV to switch to Standby automatically after a preset time (Home) > Settings > All settings > Region and language > Clock > Sleep timer. Set the TV to switch to Standby automatically after a preset time.
Internet. Home Network Make the Connection To enjoy the full capabilities of your Philips Smart TV, your TV must be connected to the Internet. (Home) > Settings > All settings > Wireless and networks > Wired or Wi-Fi > Connect to Connect the TV to a home network with a high-speed network >...
Page 41
2 - You can set the number for IP Memory Address, Netmask, Gateway, DNS 1, or DNS 2. With Clear Internet Memory you clear your Philips server registration and parental rating settings, your video store app logins, all Philips App Gallery Switch On with Wi-Fi (WoWLAN) favourites, Internet bookmarks and history.
App gallery does not hold what you are looking for, try the World Wide Web and surf the Internet on TV. Smart TV Search With Search, you can search the App Gallery for 13.1 relevant Apps. Setup Smart TV Enter a keyword in the text field, select and press OK to start searching.
Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby.
Amazon Prime Video With an Amazon prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the app icon to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app.
YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos that uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app.
Freeview (Australia) 17.1 About Freeview This TV is certified by Freeview. Never miss a thing with Freeview! Find out what’s on now, next or over the next 7 days with the easy to use TV guide. Looking for your favourite show? Use Search for quick access to all your favourite on demand from ABC iview, SBS On Demand, 7+, 9Now and 10 Play.
Freeview (New Zealand) 18.1 About Freeview This TV is certified by Freeview New Zealand. Freeview is the leading free-to-air TV platform in New Zealand. It brings together a wide range of the most popular channels offering fantastic shows and movies, so everyone in New Zealand can be informed and entertained with free TV.
Environmental 19.1 End of Use Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU.
Supported media server software • You can use any DLNA V1.5 certified media server software. • You can use the Philips TV Remote app (iOS and Android) on mobile devices. Performance may vary, depending on the capabilities of the mobile device and the software used.
The TV goes back to standby after showing the Philips startup screen 21.1 When the TV is in standby, a Philips startup screen is Tips displayed, then the TV returns to standby mode. This is normal behaviour. When the TV is disconnected...
Press (Home) > Settings > Help > Check the TV. location. Set the TV to Home location for use at If the video clip stays black, call Philips. Wait until the home. clip ends and select Contact info in the Help menu.
Picture does not fit the screen / Wrong or unstable 21.7 picture size / Picture position is incorrect HDMI - UHD • If the picture size - its aspect ratio - does not fit the screen, with black bars on the top and bottom or left HDMI and right side of the screen, press ...
21.9 Wi-Fi and Internet Wi-Fi network not found or distorted • Check if the firewalls in your network allow access to the TV's wireless connection. • If the wireless network does not work properly in your home, try the wired network installation. Internet does not work •...
If liquids are spilt on or into the TV, disconnect the TV controls. from the power outlet immediately. • ALWAYS route cords and cables connected to your Contact Philips TV Consumer Care to have the TV television so they cannot be tripped over, pulled or checked before use. grabbed.
some lithium battery types). 22.2 • Disposal of a battery into fire or a hot oven, or Screen Care mechanically crushing or cutting of a battery, that can result in an explosion. • Leaving a battery in an extremely high temperature Clean surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
TP Vision, which is the manufacturer of the for early integration in its products. product. TP Vision is the warrantor in relation to the TV with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
Copyrights 24.1 HDMI The terms HDMI and HDMI High-Definition 24.4 Multimedia Interface, and the HDMI Logo are DTS-HD (italics) trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. DTS For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both Open Source programming and interactive use. In addition, most sh scripts can be run by Bash without modification. 25.1 Source: http://www.gnu.org/software/bash/ Open Source Software c-ares (1.10.0) This television contains open source software.
Page 60
The GNU Find Utilities are the basic directory Source: http://www.gnu.org/software/inetutils/ searching utilities of the GNU operating system. These programs are typically used in conjunction with iptables (1.4.15) other programs to provide modular and powerful For Cross connection. directory search and file locating capabilities to other Source: http://www.netfilter.org/projects/iptables/ commands.
Page 61
libusb. ain_Page This piece of software is made available under the terms and conditions of the libusb license, which can mtd-utils be found below. The aim of the system is to make it simple to provide Source: a driver for new hardware, by providing a generic http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper http://www.libusb.org/...
Page 62
procps (ps, top) (3.2.8) to run . procps is the package that has a bunch of small This piece of software is made available under the useful utilities that give information about processes terms and conditions of the u-Boot loader license, using the /proc filesystem.
Page 63
Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Digital Media Renderer - DMR Digital Out Delay Parental Rating Digital Out Format Pause TV Digital Out Levelling Philips TV Remote App Digital Out Menu Photos, Videos and Music Digital Out Offset Picture Clean, Noise Reduction Dolby Atmos Notification Picture Contrast Menu...
Page 65
Postal code USB Hard Drive Connection Problems USB Keyboard Settings User Manual Quick Picture Settings Quick Settings Menu Video Contrast Video on Demand View Network Settings Recordings Viewing Distance Register TV Remote Control Remote Control - IR Sensor Wi-Fi Remote Control and Batteries Rename or replace device icon Repair Reset Settings...
Need help?
Do you have a question about the 70PUT7605 and is the answer not in the manual?
Questions and answers