Contents 13.1 Setup Smart TV 1 Get Support 13.2 Smart TV Start Page 1.1 Identify and Register your TV 13.3 App Gallery 1.2 TV Help and User Manual 14 TV on Demand / Video on Demand 1.3 On-line Help and User Manual 1.4 Consumer Care / Repair 15 Netflix 2 Software...
Identify and Register your TV Manual Identify your TV - TV model number and serial To solve any Philips TV related problem, you can number consult our online support. You can select your language and enter your product model number.
Page 4
cause severe injury, irrepairable damage to your TV or void your warranty.
back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice Update Software • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again.
Quick Guide Remote Control Batteries and Cleaning Replace batteries Standby / On If the TV does not react on a key press on the remote To switch the TV on or back to Standby. control, the batteries might be empty. 2 - ...
7 - OPTIONS To open or close the Options menu. IR sensor The TV can receive commands from a remote control Bottom that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV.
Keywords and look up Safety and Care. TV Placement • 50PUS6654 VESA MIS-F 200x200, M6 (Minimum 16 mm, Maximum 22 mm) Tips on Placement Preparation • Position the TV where light does not shine directly Make sure that the metal screws, to mount the TV to on the screen.
Page 9
Switch to standby To switch the TV to standby, press on the remote Although this TV has a very low standby power control. You can also press the small joystick key on consumption, unplug the power cable to save energy the bottom of the TV.
Connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish.
Match the YPbPr (green, blue, red) connector colours with the cable plugs when you connect. Use an Audio L/R cinch cable if your device also has sound. Digital Audio Out - Optical Audio Out - Optical is a high quality sound connection.
mobile device. 2 - On your mobile device, select the TV. (This TV will be displayed as TV model name) 3 - Select the TV name on your mobile device, after connection, you can enjoy using Miracast. Stop Sharing You can stop sharing a screen from the TV or from the mobile device.
When you switch on the TV, it may take a few minutes favourite app store today. before the CAM is activated. If a CAM is inserted and The Philips TV Remote App is available for iOS and subscription fees are paid (subscription methods can Android and is free of charge.
Page 14
To set the PIN code for the CAM… a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on 1. Press SOURCES . your TV before you install the USB Hard Drive. 2.
Page 15
A USB Hard Drive installed on your TV will need reformatting for use with a computer. To format a USB Hard Drive… 1 - Connect the USB Hard Drive to one of the USB connections on the TV. Do not connect another USB device to the other USB ports when formatting.
Switch Source Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (Right) or (Left) and press OK. • To view the technical information of the connected device you are watching, press ...
for channels Channels 1 - Select Start now and press OK. 2 - Select Update channels to only add new digital channels. 3 - Select Start and press OK to update channels. About Channels and Switch This can take a few minutes. Channels Quick reinstall ...
Page 18
frequency value to search for channels, the All channels list but also in the New channels list. select Advanced. Empty channels are removed. If new channels are found or if channels are updated Frequency step size or removed, a message is shown at TV start up. The The TV searches for channels in steps of 8MHz.
Page 19
• Fine tune automatically. To fine tune a channel, select Fine tune and • Up to 4 Satellites - You can install up to 4 satellites press OK. You can fine tune the channel (4 LNBs) on this TV. Select the exact number of with ...
Page 20
(Home) > Settings > Install Manual Installation Channels > Satellite installlation > Search for satellite > Remove satellite (Home) > Settings > Install Channels > Satellite installlation > Manual You can remove one or more satellites from your installtion current satellite installation.
Page 21
With Channel list copy, you can copy the channels setting, see chapter Re-install channels. Start this installed on one TV onto another Philips TV of the procedure until you reach the country setting. same range. With Channel list copy, you avoid the Press ...
language (the language set on TV), the TV can show Channel info subtitles automatically in one of your preferred subtitle languages. One of these subtitle languages Select Channel info to view the technical information must also be part of the broadcast. of the channel.
Page 23
Channel List Options Select Channel Range > OK > OPTIONS > Select channel range Open Option Menu Select a range of channels in a favourites channel To open the channel list option menu... list, once completed, press OK. •...
With the TV Guide you can view a list of the current and scheduled TV programmes of your favourite Favourite Channels channels. Along with your favourite channels, the first 3 most used channels from the broadcasters’ default About Favourite Channels list will be appended after your favourite channels for your preview.
Page 25
Some broadcasters offer T.O.P. Text. To open T.O.P. Text pages within Text, press OPTIONS and select T.O.P. overview. * The teletext can only be reached when the channels are installed directly on the TV’s internal tuner and the set is on TV mode. If a set-top box is being used, the teletext will be unavailable via TV.
Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. What You Need Alternatively, you can press ...
Page 27
Set a Recording You can set a recording in the TV Guide. To record a programme… 1 - Press TV GUIDE and select a future or ongoing programme. 2 - Press the colour key Record . To cancel a recording… 1 - Press ...
To record a programme… Recording and 1 - Press TV GUIDE. 2 - On the TV guide, select the channel and programme you wish to record. Press (Right) Pause TV or (Left) to scroll through the programmes of a channel.
8 - Select Schedule and press OK to schedule the Replay manual recording. The recording will appear in the list of scheduled Since the TV stores the broadcast you are watching, recordings and reminders. you can mostly replay the broadcast for a few seconds.
Photo Options Videos, Photos and With a photo on screen, press OPTIONS to… Music List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on 10.1 View the pictures in sequential order, or at random. From a USB Connection Repeat, Play once View the pictures repeatedly or once only.
360 Photo Options Video Options With a 360 photo on screen, press OPTIONS to… During the video playback, press OPTIONS to… List/Thumbnails List/Thumbnails View 360 photos with list view or thumbnails view. View video files with list view or thumbnails view. Shuffle off, Shuffle on Subtitles View the pictures in sequential order, or at random.
ideal sound settings. • Audio out - Set the TV to play the sound on TV or Open TV Setting on the connected audio system. • Ambilight style* - Select one of preset Ambilight Menus styles. • Ambilight+hue* - Switch Ambilight+hue on or off. •...
Page 33
not supported in Monitor mode. The TV is able to play (Home) > Settings > All HDR video in Monitor mode but no HDR processing settings > Picture > Contrast will be applied. Press the arrows (up) or (down) to adjust the contrast value of the picture.
Page 34
Custom colour temperature Dynamic Contrast Select Custom in Colour temperature menu (Home) > Settings > All to customise a colour temperature yourself. Press settings > Picture > Expert mode the arrows (up) or (down) to adjust the value. settings >...
Page 35
different degress of smoothing the artefects in digital extreme picture formats can still show black bars. video content. Picture content aspect ratio may change. MPEG artefacts are mostly visible as small blocks or • Fit to screen – automatically zooms in the picture jagged edges in on-screen images.
Page 36
• Original - Most neutral sound setting Select On a TV stand or On the wall to have best • Movie - Ideal for watching movies sound reproduction according to the setting. • Music - Ideal for listening to music •...
Page 37
the TV speakers when the device is playing the • If you cannot set a delay on the Home Theatre sound. System, you can set the TV to sync the sound. • You can set an offset that compensates for the time necessary for the Home Theatre System to process the sound of the TV picture.
Page 38
control > On General Settings Connection Related Settings Note: - EasyLink might not work with devices from other Format USB Hard Drive brands. (Home) > Settings > All settings > General - The HDMI CEC functionality has different names on settings >...
Page 39
Adjust Picture and audio Eco Settings (Home) > Settings > All settings > General Set energy saving level settings > Shop setup > Picture and audio (Home) > Settings > All settings > General Select Optimized to shop or Custom settings for settings >...
Page 40
Auto delay setting Digital TV channels can broadcast audio with several Set the Auto delay time from 15 seconds to 5 minutes. spoken languages for a programme. You can set a preferred primary and secondary audio language. If Auto loop selection audio in one of these languages is available, the TV will switch to this audio.
Page 41
PIN code when you try to start an 18+ rated app. This lock is only valid for 18+ rated apps Universal access for blind or partially sighted from the Philips apps. people (Home) > Settings > All settings > Universal access >...
Page 42
Set code (Home) > Settings > All settings > Child lock > Set code Set the PIN code to lock or unlock the TV.
If your router has WPS, you can directly connect to the router without scanning for networks. If you have To enjoy the full capabilities of your Philips Smart TV, devices in your wireless network that use the WEP your TV must be connected to the Internet.
(Home) > Settings > All settings > Wireless (Home) > Settings > All settings > Wireless and networks > Clear Internet Memory and networks > Static IP configuration With Clear Internet Memory you clear your Philips 1 - Select Static IP configuration and configure the...
Page 45
Philips App Gallery favourites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared.
Search Smart TV With Search, you can search the App Gallery for relevant Apps. Enter a keyword in the text field, select and 13.1 press OK to start searching. You can enter names, Setup Smart TV titles, genres and description keywords to search. Alternatively, you can leave the text field empty and search for the most popular searches/keywords for a The first time you open Smart TV, you need to...
TV on Demand / Video on Demand TV on Demand (Home) > Apps > TV on Demand You can watch TV programmes you missed or watch your favourite programmes whenever it suits you best. Video on Demand (Home) > Apps > Video on Demand You can rent movies from an online rental video store.
Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby.
Amazon Prime Video With an Amazon prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the app icon to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app.
YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos that uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app.
Please act according to your local rules and do not can also find the power consumption values for this dispose of your old products with your normal product on the Philips website for your country household waste. Correct disposal of your old www.philips.com/TVsupport...
• Image Codec : JPEG, GIF, PNG, BMP, HEIF, 360 19.5 photo Supported Input Resolution - Wi-Fi Certified Computer This TV supports Miracast certified devices. Performance may vary, depending on the capabilities • 640 x 480 - 60Hz of the mobile device and the software used. •...
Philips startup screen > User manual to find the information you are looking When the TV is in standby, a Philips startup screen is for. Select a keyword to go the most relevant page in displayed, then the TV returns to standby mode. This the User manual.
Press (Home) > Settings > Help > Check the TV. settings at the start of the installation. You can set the If the video clip stays black, call Philips. Wait until the TV to search for One, Two or 3/4 satellites.
Call the telephone number for your country. (Home) > Settings > All settings > General settings > Location Sound but no picture • Change to other video sources and then change Picture does not fit the screen / Wrong or unstable back to current source.
20.8 20.10 HDMI - UHD Wi-Fi and Internet HDMI Wi-Fi network not found or distorted • Note that HDCP (High-bandwidth Digital Content • Check if the firewalls in your network allow access Protection) support can delay the time taken for a TV to the TV's wireless connection.
The remote control may contain coin-type batteries from the power outlet immediately. which can easily be swallowed by small children. Contact Philips TV Consumer Care to have the TV Keep these batteries out of reach of children at all checked before use.
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours.
TP Vision is the warrantor in relation to the apparatus, in general have the ability to emit and TV with which this booklet was packaged. Philips and receive electromagnetic signals. One of TP Vision’s the Philips Shield Emblem are registered trademarks leading business principles is to take all necessary of Koninklijke Philips N.V.
23.4 DTS-HD (italics) Copyrights DTS 23.1 For DTS patents, see http://patents.dts.com. HDMI Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol The terms HDMI and HDMI High-Definition together, DTS-HD, and the DTS-HD logo are Multimedia Interface, and the HDMI Logo are registered trademarks and/or trademarks of DTS, Inc.
P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both Open Source programming and interactive use. In addition, most sh scripts can be run by Bash without modification. 24.1 Source: http://www.gnu.org/software/bash/ Open Source Software c-ares (1.10.0) This television contains open source software.
Page 63
The GNU Find Utilities are the basic directory Source: http://www.gnu.org/software/inetutils/ searching utilities of the GNU operating system. These programs are typically used in conjunction with iptables (1.4.15) other programs to provide modular and powerful For Cross connection. directory search and file locating capabilities to other Source: http://www.netfilter.org/projects/iptables/ commands.
Page 64
libusb. ain_Page This piece of software is made available under the terms and conditions of the libusb license, which can mtd-utils be found below. The aim of the system is to make it simple to provide Source: a driver for new hardware, by providing a generic http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper http://www.libusb.org/...
Page 65
procps (ps, top) (3.2.8) to run . procps is the package that has a bunch of small This piece of software is made available under the useful utilities that give information about processes terms and conditions of the u-Boot loader license, using the /proc filesystem.
Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Digital Out Offset 37 Dynamic Contrast 34 Parental Rating 41 Pause TV 29 Philips Support 3 End of Use 51 Philips TV Remote App 13 Energy Saving 39 Photos, Videos and Music 30 Equalizer 36 Picture Clean, Noise Reduction 34 European Eco-label 51...
Page 68
Picture Style 32 Update Software - Local Updates 5 Picture, Colour 33 Update Software - OAD 5 Picture, Contrast 33 Update Software - USB 5 Picture, Sharpness 33 USB Flash Drive 14 Power Cable 8 USB Hard Drive 38 Problems 54 USB Hard Drive - Format 14 USB Hard Drive - Install 14 USB Hard Drive Connection 14...
Need help?
Do you have a question about the 50PUS6654 and is the answer not in the manual?
Questions and answers