Quick Start Guide
Follow the procedures in steps 1 through 6 to make a print.
DPP-FP50
For details, see the Operating Instructions.
1
Check the contents of the package.
Printer (1)
Paper tray (1)
CD-ROM (1)
• Sony DPP-FP50 Printer Driver Software
for Windows® XP Professional/Windows
XP Home Edition/Windows XP Media
Center Edition/Windows 2000 Professional/
Windows Millennium Edition/Windows 98
Second Edition
• PictureGear Studio Ver.2.0
AC adapter (1)
AC power cord (1)
• Operating Instructions (1)
• Quick Start Guide (this leafl et, 1)
• Warranty (1)
• Sony End User Software License
Agreement (1)
• Sample color printing pack (1)
© 2005 Sony Corporation Printed in China
2
Prepare the sample color printing pack (supplied).
The following printing packs are also available as optional accessories.
For post card size printing:
SVM-F40P
Remote commander
• Post card (4 x 6 inch) size print paper
(1)
(two packs with each 20 sheets)
• Print cartridge for 40 prints (1)
For the details, see page 11 of Operating Instructions. (*In some regions, 3.5 x 5
inch print paper is not sold.)
Video connecting
cable (1)
3
Load the print cartridge.
1
Pull and open the
cartridge compartment
Cleaning cartridge
lid.
(1)
Clamp fi lter (1)
2-632-885-11(2)
For 3.5 x 5 inch size printing:
SVM-F40L*
• 3.5 x 5 inch size print paper (two
packs with each 20 sheets)
• Print cartridge for 40 prints (1)
2
3
Insert the print
Close the lid.
cartridge.
Arrow
4
Insert the print paper.
1
2
Open the eject paper tray (1), and
Insert the print paper.
then slide and lift open the paper
tray lid (2).
Face stamp marker (Postcard size) or
arrow imprint (3.5 x 5 inch size) toward
Tray adaptor (Remove it when the
feeding direction.
Postcard size print paper is used.)
3
4
Remove the protective sheet,
Pull and open the printer's paper
and close the paper tray lid, and
tray compartment lid and insert the
then slide it to the paper feeding
paper tray into the printer.
direction.
Insert it fi rmly until it clicks into place.
You can use the protective sheet as
cleaning sheet. Keep it together with the
cleaning cartridge.
5
Connect to the AC outlet.
Insert one plug of the AC power cord
to the wall outlet and the other to the
AC adapter. Then connect the plug of
the AC adapter to the DC IN jack of
the printer.
AC power cord
AC adapter
6
Go to step
.,
Need help?
Do you have a question about the DPP-FP50 and is the answer not in the manual?
Questions and answers