• Please use approved power cord presentation of the original invoice provided by Philips all the time. If or cash receipt, indicating the date of your power cord is missing, please purchase, dealer’s name and model and contact with your local service production number of the product.
Page 4
1. Important • Excessive usage of monitor can • Unplug the monitor if you need to cause eye discomfort, it’s better to clean it with a slightly damp cloth. take shorter breaks more often at The screen may be wiped with a your workstation than longer breaks dry cloth when the power is off.
1. Important ing” will disappear gradually over a 1.2 Notational Descriptions period of time after the power has The following subsections describe been switched off. notational conventions used in this Warning document. Failure to activate a screen saver, or a periodic screen refresh application Notes, Cautions and Warnings may result in severe “burn-in”...
Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take- This marking on the product or on back initiatives and recycling programs...
Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
2. Setting up the monitor Connecting to your PC 2.2 Operating the monitor Description of the control buttons AC power input HDMI input DisplayPort input Audio out Kensington anti-theft lock Switch monitor’s power ON Connect to PC OFF. 1. Connect the power cord to the back Access the OSD menu.
Page 9
On-Screen Display. You can use On-Screen Display (OSD) is a feature in this as a reference when you want to all Philips LCD monitors. It allows an end work your way around the different user to adjust screen performance or adjustments later on.
2. Setting up the monitor Note Warning • MPRT: To reduce motion blur, LED • To avoid potential screen damage, backlight will strobe synchronously such as panel peeling, ensure that with screen refresh, which may the monitor does not tilt downward cause noticeable brightness change.
Page 11
2. Setting up the monitor Note 3. Remove the hinge cover from monitor body by using your fingers. Please purchase the appropriate wall mount; otherwise the distance between the back-plug-in signal cable and the wall would be too short. 4. Use a screwdriver to remove the screws on the arm,and then detach 0°...
Whether you're working with text applications, displaying images 1. Toggle to the left to launch the or watching a video, Philips SmartImage SmartImage on screen display. delivers great optimized monitor 2. Toggle to the up or down to select performance.
Developed for wellbeing, By reducing your monitor's power Philips LowBlue Mode setting uses a consumption, you save on energy costs smart software technology to reduce and extend the lifetime of your monitor.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight W-LED system Panel Size 31.5” W (80cm) Aspect Ratio 16:9 Pixel Pitch 0.364 x 0.364mm Contrast ratio (typical) 3000:1 Optimum Resolution 1920 x 1080 @ 60Hz Viewing Angle 178° (H) / 178° (V) @ C/R > 10 (typ.) Picture Enhancement SmartImage Display Colors...
Page 16
5. Technical Specifications Power AC Input AC Input AC Input Consumption Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC , 50Hz Normal Operation 43.60 W (typ.) 43.70 W (typ.) 43.80 W (typ.) Sleep (Standby mode) 0.5 W 0.5 W 0.5 W...
Page 17
5. Technical Specifications Environmental ROHS Packaging 100% recyclable Specific Substances 100% PVC BFR free housing Cabinet Color Black Finish Textured Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
5. Technical Specifications Note 5.1 Resolution & Preset Modes Please notice that your display works Maximum Resolution best at native resolution of 1920x1080. For best display quality, 1920 x 1080@165Hz(DP 1.2) please follow this resolution 1920 x 1080@144Hz(HDMI 1.4) recommendation. Recommended Resolution 1920 x 1080@60Hz H.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
Other combinations Pixel Defect Policy of lit and dark sub pixels appear as single pixels of other colors. Philips strives to deliver the highest quality products. We use some of the Types of Pixel Defects industry's most advanced manufacturing...
Page 21
A red or blue bright dot must be the warranty period, a TFT Monitor more than 50 percent brighter than panel in a Philips flat panel monitor must have pixel or sub pixel defects neighboring dots while a green exceeding the tolerances listed in the bright dot is 30 percent brighter than following tables.
Page 22
7. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* ≥ 15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
If the problem • Disconnect the monitor from mains still persists after you have tried these power source immediately for safety solutions, contact Philips customer • Contact with Philips customer service representative. service representative immediately. Common Problems Imaging Problems...
Page 25
LED Setup in OSD • Shut down your computer, main Controls. disconnect your old monitor and reconnect your Philips LCD monitor. For further assistance, refer to the Service contact information listed • Turn on your monitor and then turn in Regulation &...
Q9: Can I connect my LCD monitor to any PC, workstation or Mac? How should I clean the LCD surface? Ans.: Yes. All Philips LCD monitors are fully compatible with standard Ans.: For normal cleaning, use a clean, PCs, Macs and workstations.
Page 27
"ghost imaging" is a well-known Ans.: Regulation & Service Information phenomenon in LCD panel technology. In most cases, the Manual can be download on the Philips website support page. "burned in" or "atter-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off.
Page 28
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the E Line 322E1 and is the answer not in the manual?
Questions and answers