Thank you for purchasing this television set. You are now the proud owner of a Philips TV, which promises full value to you as a customer. Please read this manual carefully and thoroughly for help with installation and operation. Setup and Installation Product Highlights .
Digital Natural Motion™ Enables smooth and jitter-free movements from any source. The advanced Philips chip used for DNM has the processing power of several Pentium proces- sors. It has the ability to detect fast-moving sequences from film and video material and it can handle multi-directional movements at the same time.
The major benefit of this projection television is its large viewing screen.To see the large screen at its best, test various locations in the room to find the optimal spot for viewing. Be sure to allow a minimum of 15 cm of space around the TV.
MAINS POWER KEY Switches the mains power on or off. Proximity Sensor IntelliSense When pressed, automatically adjusts the set’s picture convergence using the Auto IntelliSense ® focus feature. MENU Press to activate the on-screen menu. Navigate the menu by using the Volume and Channel buttons.
† to search, *Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Pixel Plus, Incredible Surround, and Active Control are trademarks of Philips Consumer Electronics. Copyright 2003 Philips Consumer Electronics. All rights reserved. fi ®...
Page 7
SING THE fi ® Ò ‡ π † PIXEL PLUS MENU Ï ¬ ZOOM ACTIVE SMART CONTROL SMART EMOTE ONTROL STANDBY • Switches the set on and off from standby mode. (The red light indi- cator lights up when the set is in standby mode.) PICTURE-IN-PICTURE (PIP) Press to access the Picture-in-Picture and Dual-window features.
Press the MENU Ï key on the remote control to summon the main menu. Note: Should your remote control be lost or broken you can still use the keys on the front of the TV. See p. 5. Press the cursor button up or down to select the TV, Settings, Install or Demo menu.
Press the MENU Ï key on the remote control. When you switch on your TV for the first time and no chan- nels are stored so far, the menu Language automatically appears on the screen. This menu also has an additional item Exit with which the menu can be dismissed.
Give name Select Give Name in the Install menu and press the cursor down. Select the programme number. Note: keep the cursor up/down pressed to scroll through the programme list quickly. Press the cursor right. A keyboard appears on the screen.
Picture menu Use the Picture menu to adjust picture settings. screen Menu-Info i for more information about the menu items. Ï key on the remote control to Press the MENU summon the main menu. Press the cursor right to select Select the menu items in the Picture menu with the cursor up/down.
Sound menu Use the Sound menu to adjust sound settings. screen Menu-Info i for more information about the menu items. Ï key on the remote control to Press the MENU summon the main menu. Press the cursor right to select Select the menu items in the Sound menu with the cursor up/down and adjust the settings with the cur- sor left/right.
Features menu Use the Features menu to adjust sound settings. screen Menu-Info i for more information about the menu items Ï key on the remote control to Press the MENU summon the main menu. Press the cursor right to select Features. Select the menu items in the Features menu with the cursor up/down and adjust the settings with the cur- sor left/right.
General menu Use the General menu to adjust settings that are not changed often. Use the on-screen Menu-Info i for more information about the menu items Ï key on the remote control to Press the MENU summon the main menu. Press the cursor down to select Press the cursor right to select Select the menu items in the General menu with the...
SING THE Source Use this menu to select the peripheral you connected to one of the external inputs.Use the on-screen Menu-Info i for more information about the menu items Ï key on the remote control to Press the MENU summon the main menu. Press the cursor down to select Press the cursor right to select Press the cursor down to select one of the external...
The Demo menu allows to demonstrate the TV features separately or in a continuous loop. Ï key on the remote control to Press the MENU summon the main menu. Select Demo in the Main menu with the cursor down. Select Auto demo or one of the features with the cursor right and press the OK key on the remote control.
The Picture-in-Picture (PIP) feature allows you to call up a subscreen within your main screen to watch two or more channels or a channel and a peripheral at the same time. The Dual-window feature allows you to divide the main screen into two subscreens so that two channels or a channel and an external source can be watched simultane- ously.
Many TV channels broadcast information via teletext. Each channel that broadcasts teletext transmits a page with information on how to use its teletext system. Look for the teletext page with the main index (usually p. 100). Depending on the TV channel, teletext is transmitted in different sys- tems.
Page 19
Quickly Running Through the Teletext Pages Press the cursor up/down or the CH +/– keys to run through the pre- vious or the following pages. Selecting the Index Teletext Page m key to return to the main index (usually Press the p.
You can connect a wide range of video and audio equipment to your TV in various ways.This page and the next one provide an overview of signal compatabilities and the types of equipment you can connect to the sock- ets. Connection examples follow on subsequent pages. As necessary, also refer to the handbook for peripheral equipment.
Page 21
The AV3 and AV4 sockets allow you to connect digital equipment with 1080i/480p (60Hz) or 576p (50Hz) signal output. Overview : High-definition Inputs AV3—use to connect digital equipment with a 1080i/480p (60Hz) or 1080i/576p (50Hz) signal output, such as digital set-top boxes or DVD players with progressive-scan capability.You can connect equipment with PbPrY component video or RGB outputs to the AV4 sockets.
Page 22
Video Recorder : Playback Connect the RF cable to the RF socket on your video recorder. Connect another RF cable from the output of your video recorder to the ANTENNA IN 75Ω socket on your TV. Better playback quality can be obtained if you also connect the Video, Audio Left and Right (only for stereo equipment) cables to the VIDEO and AUDIO L (mono) and R inputs of INPUT-AV 2.
Page 23
Video Recorder : Recording To record S-VHS quality, connect an S-VHS peripheral directly to the video recorder. Recording a TV Programme Select the channel number on your video recorder. Set your video recorder to record. See the handbook for your video recorder. Switching channel numbers on your TV does not disturb recording Recording a Programme on Your Video Recorder Connected to MONITOR OUT from Audio/Video Equipment Connected...
Page 24
Video Recorder and Other A/V Peripherals Connect the RF cable to the RF socket on your A/V peripheral equipment. To obtain better picture quality, also connect the Video and Audio left and Audio right (only for stereo equipment) cables to the VIDEO and AUDIO L (mono) and AUDIO R input of the INPUT- AV 2 sockets.
Page 25
S-Video Equipment Note : Progressive-scan DVD players can be connected to the AV3 or AV4 inputs only. Connect an S-VIDEO cable to the INPUT-AV 2 S-VIDEO input. Connect the audio cables to the equipment’s AUDIO L (mono) and AUDIO R sockets and to the INPUT-AV 2 AUDIO L (mono) and AUDIO R sockets on your TV.
Camera and Camcorder Connect your camera or camcorder to sockets at the side of your TV. Connect the equipment to the VIDEO or S-VIDEO socket. Note : S-VHS quality with an S-VHS camcorder is obtained by connecting an S-VIDEO cable with the S-VIDEO socket instead of making a connection to the VIDEO socket.
Page 27
Additional Audio Connections : Surround Sound Your TV has extra sockets that allow you to connect to an external audio amplifier system and powered subwoofer.This connection will pro- vide a surround-sound experience similar to a movie theatre or concert hall. Connect audio cables from the AUDIO L and R MONITOR OUT sockets of the TV to the AUDIO L and R inputs sockets on the surround-sound amplifier.
ELECTING Equipment Connected with an Aerial Cable Only Select the channel number under which you have stored the test signal with the digit keys. Equipment Connected to the back or to the side of the TV w to select the AV input for the device you want to use: Press AV1,AV2,AV3,AV4, or side Press the Accessory buttons to control an accessory device with...
ISPOSAL OF THE Philips is making its products environmentally friendly.Your new TV contains materials that can be recycled and reused. Specialised companies can dismantle your discarded TV at the end of its life, concentrating on the reusable materials and minimising the amount of materials to be disposed.
TV remote control does not work No power No picture Good picture but no sound Good sound but poor colour or no picture Poor picture Snowy picture and noise Colour patch (unevenness) Horizontal dotted lines Double images or “ghost” images One white line across the screen NICAM sound distortion (crackling noise)
• Picture-in-Picture: Double Window, Mozaic, 2-Tuner • Remote Control: Universal Remote Control, RC2049, Batteries Dimensions 46PP9545 • Product Dimensions (WxHxD): 113 cm x 134 cm x 60 cm • Product Weight: 80 kg • Carton Dimensions: 125 cm x 140 cm x 71 cm •...
Need help?
Do you have a question about the 46PP9545 and is the answer not in the manual?
Questions and answers