13. TECHNICAL INFORMATION..................21 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
Put knives and cutlery with sharp points in the cutlery • basket with the points down or in a horizontal position. Do not keep the appliance door open without • supervision to prevent to fall on it. Before maintenance, deactivate the appliance and •...
ENGLISH • Do not drink and play with the water in the appliance. • Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the dishes. • The appliance can release hot steam if you open the door while a programme operates.
Rating plate Cutlery basket Salt container Lower basket Air vent Upper basket Rinse aid dispenser Detergent dispenser 4. CONTROL PANEL On/off button Option button Program button Indicators Programme indicators Start button Display Delay button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates.
ENGLISH Indicator Description Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. TimeSaver indicator. Delay indicator. ExtraHygiene indicator. 5. PROGRAMMES Programme Degree of soil Programme phases Options Type of load •...
5.1 Consumption values Water Energy Duration Programme (kWh) (min) 10.2 0.832 7 - 14 0.6 - 1.6 40 - 160 12.5 - 14.5 1.4 - 1.8 169 - 179 9 - 10 1.1 - 1.3 219 - 229 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
• The indicators start to flash and the display is blank. go off. 2. Press Start. • The indicator continues to • The indicators flash. • The display shows the current go off. setting: e.g. = level 4. • The indicator –...
Page 11
ENGLISH 7.1 XtraDry How to activate ExtraHygiene Activate this option when you want to Press Option until the indicator boost the drying performance. With the comes on. use of this option, the duration of some If the option is not applicable to the programmes, water consumption and programme, the related indicator does the last rinse temperature can be...
To improve the drying performance refer to the XtraDry option or activate AutoOpen again. 8. BEFORE FIRST USE 1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener.
ENGLISH 8.2 How to fill the rinse aid 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse dispenser aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam.
Page 14
• The countdown starts to decrease appliance door. with steps of 1 hour. Only the last 4. Close the lid. Make sure that the lid hour will decrease with steps of 1 locks into position.
ENGLISH 10. HINTS AND TIPS 10.1 General we recommend that you use the tablets with long programmes. The following hints will ensure optimal • Do not use more than the correct cleaning and drying results in daily use quantity of detergent. Refer to the and also help to protect the instructions on the detergent environment.
• Make sure that the spray arm can • The correct quantity of detergent is move freely before you start a used. programme. 10.6 Unloading the baskets 10.5 Before starting a 1. Let the tableware cool down before programme you remove it from the appliance.
Page 17
ENGLISH 11.2 Cleaning the upper spray We recommend to clean regularly the upper spray arm to avoid soil to clog the holes. Clogged holes can cause unsatisfactory washing results. 1. Pull out the upper basket. 2. To disengage the spray arm from the basket, press the spray arm upwards in the direction indicated by the lower arrow and simultaneously turn...
11.4 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. • If you regularly use short duration programmes, these can leave deposits of grease and limescale inside the appliance. To prevent this,...
Page 19
ENGLISH Problem and alarm code Possible cause and solution The appliance does not fill • Make sure that the water tap is open. with water. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water The display shows authority.
Page 20
Refer to "Before first use", Authorised Service Centre. "Daily use", or "Hints and For alarm codes not described in the tips" for other possible table, contact an Authorised Service causes. Centre. Once you have checked the appliance, deactivate and activate the appliance.
ENGLISH Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for washing. Refer to "The water softener". • Silver and stainless steel cutlery were placed together. Avoid to put silver and stainless steel items close to- gether.
Page 22
Power consumption Off-mode (W) 0.10 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption.
Need help?
Do you have a question about the FAVORIT 65610IM0P and is the answer not in the manual?
Questions and answers