Page 1
PD527D & PD523PD Service Guide Service guide files and updates are available on the AIPG/CSD web; for more information, please refer to http://csd.acer.com.tw PRINTED IN TAIWAN...
Page 2
Revision History Please refer to the table below for the updates made on PD527D & PD523PD service guide. Date Chapter Updates...
Page 4
Conventions The following conventions are used in this manual: Screen messages Denotes actual messages that appear on screen. NOTE Gives bits and pieces of additional information related to the current topic. WARNING Alerts you to any damage that might result from doing or not doing specific actions.
Page 5
DIFFERENT part number code to those given in the FRU list of this printed Service Guide. You MUST use the list provided by your regional Acer office to order FRU parts for repair and service of customer machines.
Page 6
Chapter 1 System Introduction (PD527D) Technical Specifi cation Item Description Dimensions (LxWxH) 256 x 283 x 104 mm Weight Approx. 6.0 lbs (2.7 Kg) Tilt Angle 7 degree with elevator mechanism Keystone correction +/-16 degree (32 degree) (Horizontal) Lamp Door Projection...
System Introduction (PD523PD) Technical Specifi cation Item Description Dimensions (LxWxH) 256 x 283 x 104 mm Weight Approx. 6.0 lbs (2.7 Kg) Tilt Angle 7 degree with elevator mechanism Keystone correction +/-16 degree (32 degree) (Horizontal) Lamp Door Projection Lamp power supply shut off automatically when door open - Universal AC 100-240V ~ 50-60Hz with PFC input Power Supply - 230W for OSRAM Lamp @ normal operation...
Product Overview Main Unit Item Description Focus Ring Zoom Ring Zoom Lens Remote Control Receiver Elevator Button Elevator Foot Connection Ports Power Socket Control Panel Chapter 1...
Control Panel Item Description Temp Indicator LED Lamp Indicator LED Power and Indicator LED (Power LED) Source Resync Four Directional Select Keys Menu Chapter 1...
Connection Ports Item Description RS232 Connector USB Connector Monitor Loop-through Output Connector (VGA-Out) Audio Input Connector Composite Video Input Connector S-Video Input Connector PC Analog Signal / HDTV / Component Video Input Connector DVI Input Connector (for Digital signal with HDCP function) (Optional) Kensington Lock Port Chapter 1...
Connecting the Projector Video Output DVD Player, Settop Box, HDTV receiver RS232 S-Video Output Item Description Power Cord VGA Cable Composite Video Cable USB Cable VGA to Component / HDTV Adapter S-Video Cable Audio Cable Jack / Jack DVI Cable (Optional Accessory) Chapter 1...
Page 12
+3.3V/1.3A (1.5A Max) DRCG RDRAM SDRAM FLASH +5.0V/3.2A (3.5A Max) LVPS (Optioin) +13.0V/0.4A (1.0A Max) +385V/0.62A (0.65A Max) / 24 DVI HDCP TMDS IN PMDAT 16 Bits SiI169 / Expander DVI RS-232 SiI1169 DDC I2C DVI EDID RGB Out EDID R/W I2C 16 Bits Expander HV Out...
Installation Procedure DLP Composer Lite Setup Procedure Step Procedure Photo Execute Choose FW pro- “DLP Composer Lite gram v3.6 Setup” program. Next Click “Next” button. Next 1. Reading the “License Agreement” rules. 2. Choose “I accept and agree to be bound by all the terms and conditions of this License Agreement”...
Page 15
Step Procedure Photo Next 1. Choose “All” icon. 2. Click “Next” button. Next Click “Next” button. Process- The program is execut- ing “Initializing” status. Chapter2...
USB Driver Upgrade Procedure Step Procedure Photo Set-up 1. Hold on “Menu” button and plug in Power Cord while holding on “Menu”. 2. Wait for about 5 secs. 3. Once Power, Lamp, Temp LED lights up, plug in USB Cable into the Projector.
Page 17
Step Procedure Photo Update Click “OK”. The USB Success- driver is updated suc- fully cessfully. Device 1. Right click “My Manager computer” on the desktop. 2. Select “Properties” on the popup menu to launch the “System Properties” window. 3. Choose “Hardware” and then click “Device Manager”.
Firmware Upgrade Procedure Step Procedure Photo Set-up 1. Hold on “Menu” button and plug in Power Cord while holding on “Menu”. 2. Wait for about 5 secs. 3. Once Power, Lamp, Temp LED lights up, plug in USB Cable into the Projector. (Note: The system fan will not function.
Page 19
Step Procedure Photo 1. Choose “Flash Loader” 2. Click “Browse” to search the firmware file. (PD527D or PD523PD) 3. Select the item “Skip Boot Loader Area (load all but the first 16KB).” 4. Click “Reset Bus” to erase the flash memory.
Page 20
Step Procedure Photo Proceed- Proceeding Picture 1. When Firmware Upgrade Process is finished, the LED power flashs. 2. Unplug USB Cable and Power Cord. Re-plug in Power Cable. Check Restart the unit and Firmware enter the Service Mode to check the Firmware Version.
Bar, please choose the Port that you use. Ex: If you use “COM 1”, choose COM 1 in the Port selection. 2. Click on “Model”. (PD527D or PD523PD) 3. Choose the EDID that responses to the model that you choose. Chapter 2...
Page 23
Step Procedure Photo Key in 1. Key in the Serial Serial Number into the Number Barcode blank space. 2. In “Write Source Select”, make a check in “VGA” and “DVI”. 3. Click “Program”. Change “Please change the Cable to Cable to Analog” mes- Analog sage is shown on the screen, then click “OK”.
Page 24
Step Procedure Photo Check 1. In the “Read Item” the whole Selections, choose process the Port that you use. Ex: If you use the Analog Port, choose “Analog” in the “Read Item”. 2. Click on “Read” to read EDID information. 3.
Chapter 3 Mechanical Disassembly & Reassembly This section provides disassembly & Reassembly procedures for PD527D Micro Portable XGA DMD Projector (As a sample model). Before you begin any of these procedures, be sure to turn off the power, computer system, and other attached devices; then disconnect the power cable from the electrical outlet.
Mechanical Disassembly Procedure 1. Remove Lamp Module Procedure Photo Unscrew 2 screws to remove the Lamp Cover. Unscrew 2 screws to remove the Lamp Module. Chapter 3...
Page 27
2. Remove Top Cover / Keypad Board / Main Button Procedure Photo Unscrew 3 screws in the Bottom Cover, 2 screws in the IO Cover and 1 FPC connector to remove Top Cover Module. Disassemble Top Cover / Keypad BD / Main Button: (1) Unscrew 3 hex spacers (2) Unplug 1 FPC connector (3) Unscrew 9 screws to...
Page 28
3. Remove Front Cover / IR Sensor Board Procedure Photo Unplug IR Receivers and remove Front Cover directly. Loosen 3 tenons to remove IR Sensor Board. Chapter 3...
Page 29
4. Remove Back Cover and Side Covers Procedure Photo Unscrew 6 hex screws to remove the Back Cover. Remove Side Covers directly. (Right Cover & Left Cover) Chapter 3...
5. Remove Main Board Procedure Photo Unscrew 2 screws to remove the shielding. Unplug 9 connects, unscrew 5 screws in the Top and then un plug 1 connector in the Bottom to remove the Main Board. Chapter 3...
6. Remove Elevator and Shielding Cover Procedure Photo Unscrew 2 screws to remove the Shielding Cover. (1) Take off the Elevator Foot Rubber and unscrew 1 screw to remove the elevator. (2) Unscrew 1 screw to remove the elevator. Chapter 3...
Page 32
7. Remove Lamp Driver and LVPS Procedure Photo (1) Unscrew 2 hex screws & 4 screws and unplug 2 connectors to remove the Lamp Driver. (2) Loosen 4 tenons to separate the Lamp Driver. (1) Unscrew 2 hex screws & 4 screws and unplug 1 grouding wire (with 1 screw) to remove the LVPS.
Page 33
8. Remove Fan Module and Light Cut Procedure Photo Unscrew 2 screws to remove Axial Fan Module. Remove Light Cut: (1) Remove 2 screws to remove the light cut (top) (3) Light Cut (side) (2) Remove 1 screw to remove the light cut (right) (2) Light Cut (right) (3) Remove Light Cut (side) directly.
9. Remove Engine Module Procedure Photo Unscrew 4 screws to remove the Engine Module and Fan. Unscrew 3 screws to disassemble the Fan. Unscrew 1 screw to remove the Blower Duct. (1) Unscrew 4 screws to remove the Heatsink Module. (2) Unscrew 4 hex screws to disassemble the other Engine Module.
Page 35
Procedure Photo Unscrew 1 screw to remove the Color Wheel. Unscrew 1 screw to remove the Photo Sensor Board. Take the Zoom Ring off directly. Chapter 3...
10. Remove Bottom Cover Procedure Photo (1) Unscrew 3 screws to Speaker remove the Fan. Lens Support (2) Unscrew 1 screw to remove the Lens Support. (3) Remove the Speaker directly. (4) Unscrew 2 screws to remove the Lamp Wire. (5) Unscrew 2 screws to remove the Interlock Switch.
Mechanical Reassembly Procedure 1. Assemble Bottom Cover Procedure Photo (1) Screw 3 screws to Elevator Module assemble the Elevator Module. (2) Screw 9 hex spacers and assemble them to the Bottom Cover. (1) Screw 3 screws to Speaker assemble the Fan. Lens Support (2) Screw 1 screw to assemble the Lens Support.
2. Assemble Engine Module Procedure Photo Assemble the Zoom Ring directly. Screw 1 screw to assemble the Photo Sensor Board. Screw 1 screw to assemble the Color Wheel. (1) Screw 4 hex screws to assemble the Engine Module Components. (2) Screw 4 screws to assemble the Heatsink Module.
Page 39
Procedure Photo Screw 1 screw to assemble the Blower Duct. Screw 3 screws to assemble the Fan. Screw 4 screws to assemble the Engine Module and Fan. Chapter 3...
Page 40
3. Assemble Light Cut and Fan Module Procedure Photo Assemble Light Cut: (1) Assemble Light Cut (side) directly. (1) Light Cut (side) (2) Screw 1 screw to assemble the light cut (right) (2) Light Cut (right) (3) Screw 2 screws to assemble the light cut (top) (3) Light Cut (top) Screw 2 screws to assemble...
Page 41
4. Assemble LVPS and Lamp Driver Procedure Photo (1) Plug 3 connectors in the LVPS. (2) Screw 2 hex screws & 4 screws and plug 1 grouding wire (with 1 screw) to assemble the LVPS. (1) Screw 2 hex screws & 4 screws and plug 2 connectors to assemble the Lamp Driver.
Page 42
5. Assemble Elevator and Shielding Cover Procedure Photo (2) Screw 1 screw to assemble the Elevator. (1) Screw 1 screw and put on the Elevator Foot Rubber to assemble the Elevator. Screw 2 screws to assemble the Shielding Cover. Chapter 3...
Page 43
6. Assemble Main Board Procedure Photo Plug 1 connector in the Bottom, screw 5 screws in the Top and then plug 9 connects to assemble the Main Board. Screw 2 screws to assemble the Shielding. Chapter 3...
Page 44
7. Assemble Side Covers and Back Cover Procedure Photo Assemble the Side Covers directly. (Right Cover & Left Cover) Screw 6 screws to assemble the Back Cover. Chapter 3...
8. Assemble IR Sensor Board and Front Cover Procedure Photo Fasten 3 tenons to assemble the IR Sensor Board. Plug in the IR Receivers and assemble the Front Cover directly. Chapter 3...
Page 46
9. Assemble Main Button / Keypad Board / Top Cover Procedure Photo Assemble the Model Plate: (1) Fasten 8 tenons. (2) Screw 2 screws to assemble the Model Plate. Assemble Top Cover / Keypad BD / Main Button: (1) Screw 9 screws. (2) Plug 1 FPC connector.
Chapter 4 Troubleshooting Equipment Needed - PC or Pattern Generator - DVD Player (Video, S-Video, Audio) - Quantum Data 802B or CHROMA 2327 LED Lighting Message Power LED Temp Lamp Message Blue Standby State Blinking 1 sec on / 1 sec off (Input power cord) Power on Power off...
Main Procedure Symptom Procedure No Power - Ensure the Power Cord and AC Power Outlet are securely connected - Check Lamp Cover and Interrupt Switch - Ensure all connectors are securely connected and aren’t broken - Check DC-DC - Check Ballast - Check Main Board Auto Shut Down - Check LED Status...
Page 50
Symptom Procedure Image Flicker - Do “Reset” of the OSD Menu - Ensure the Signal Cable and Source work as well - Check Lamp Module - Check Color Wheel - Check DMD Board - Check Main Board Color Abnormal - Do “Reset” of the OSD Menu - Adjust Color Wheel Index - Check Main Board - Check DMD Board...
- Circumstance Brightness : Dark room less than 2.5 lux. - Inspection Distance : 1.5m~3m for functional inspection - Screen Size : 60 inches diagonal (wide) - After repairing each , the unit should be burn-in (Refer to the table below). PD527D/PD523PD Symptom Burn-in Time Normal Repair 2 Hours...
Inspection Procedure Step Specification Procedure Photo Reset After final QC Step, please do OSD reset to erase all saved change again and restore the factory defaults. Frequency Eliminate visual - Test Signal : and Track- wavy noise by 1024x768@60Hz Rsync, Frequency - Test Pattern : PANA-ICON or Tracking sele- - check and see if image...
Page 53
Step Specification Procedure Photo Screen Should be - Test Signal : Uniformity compliant with 1024x768@60Hz 60%.(Minimum) - Test Pattern : Full White Pat- tern & Full Black Pattern - Please check and ensure the unit is under the spec. - Please check and see if it’s in normal conidtion.
Page 54
Step Specification Procedure Photo Calibration Calibration Pat- - Once Main Board is changed, tern should be in firmware upgrade, Video full screen mode Calibration & PC Calibration should be done as well. - Video Calibration - Test Signal : 480P, 1080i@60Hz - Test Pattern : Master - PC Calibration...
Page 55
Step Specification Procedure Photo Blemish The bright blemish - Test Pattern : Full Black / (Bright) cannot be accept- Gray 30 ed if the problem appear with Gary 30 pattern Blemish The dark blemish - Test Pattern : Full white / Blue (Dark) cannot be accept- ed if the problem...
Page 63
Exploded Parts List Item Part Number Description 23.83J06G001 GLASS RELAY LENS 23.80J20G001 CONDENSER LENS2 23.80J20G011 CONDENSER LENS 3 52.80J03G001 LENS ANTIDUST 739 SILICONE RUBBER 52.83J06G001 RELAY ANTIDUST YM06 RUBBER PD527 61.83J09G001 ROD COVER SUS301 0.5t PD527 61.80J05G002 ROD SPRING 739 SUS301 0.25t 70.83J21G001 ASSY OPTICAL LENS MODULE PD527 70.83J19G001...
Page 64
SUB ASSY ENGINE MODULE PD523PD Chapter 5...
Page 65
Exploded Parts List Item Part Number Description 23.83J06G001 GLASS RELAY LENS 23.80J20G001 CONDENSER LENS2 23.80J20G011 CONDENSER LENS 3 52.80J03G001 LENS ANTIDUST 739 SILICONE RUBBER 52.80J04G002 RELAY ANTIDUST 739 WT41 YM06 SILICONE RUBBER 61.83L01G001 ROD COVER SVGA GLASS 739 SUS304 61.80J05G002 ROD SPRING 739 SUS301 0.25t 70.83J27G001 ASSY OPTICAL LENS MODULE PD523PD...
Page 66
ASSY TOP COVER MODULE PD527D Exploded Parts List Item Part Number Description 51.83J03G002 TOP COVER PC+ABS PD527 51.83J10G002 MODEL PLATE PC PD527 35.83J01G001 MODEL NAME LABEL PD527 51.83J11G001 CENTER BUTTON PC+ABS PD527 51.83J17G001 MAIN BUTTON PC+ABS PD527 51.83J13G001 FIX BUTTON PC+ABS PD527 51.83J15G001...
Page 67
HEX SPACER M3 W5 H6 L73.65mm AL PD527 42.83J04G002 CABLE FFC 14P 0.5mm 150L PD527 70.83J32G001 ASSY TOP SHIELDING PD527 80.83J03G001 PCBA UP IR SENSOR BD FOR PD527D 52.83J09G001 TOP IR FIX BRACKET RUBBER PD527 Note: Please refer to RSPL for updated Part Number. Chapter 5...
Page 68
ASSY ROD MODULE PD527 Exploded Parts List Item Part Number Description 23.83L17G001 INTEGRATION ROD FOR 739 XGA GLASS RELAY SERIES 61.83J10G001 ROD HOLDER SUS301 0.2t PD527 57.81501G001 UV GLUE 6-628-GEL DYMAX Note: Please refer to RSPL for updated Part Number. Chapter 5...
Page 69
ASSY ROD MODULE PD523PD Exploded Parts List Item Part Number Description 23.83L17G022 UNAXIS INTEGRATION ROD FOR 739 SVGA GLASS RELAY SERIES 61.80J04G001 ROD HOLDER 739 SUS301 0.2t Note: Please refer to RSPL for updated Part Number. Chapter 5...
Page 73
Exploded Parts List Item Part Number Description 70.83J06G001 ASSY BOTTOM BASE MODULE PD527 75.80W05G001 BUY ASSY LIGHT CUT TOP MODULE 2300MP 41.89503G001 EMI CORE A5 FS 16*5*12-1.2 70.83J33G001 ASSY PCBA MAIN MODULE PD523PD 61.80N10G001 LIGHT CUT RIGHT AL5020 EP739 85.1A626G050 SCREW PAN MECH M2.6*5 BLACK NYLOK 70.83J14G001 ASSY BOTTOM COVER MODULE PD527...
Page 74
ASSY BOTTOM BASE MODULE PD527 Chapter 5...
Page 75
ELEVATOR LEVEL PC+ABS EP739 51.80N14G001 ELEVATOR SLEEVE PC+ABS EP739 51.80N15G001 LENS SUPPORT PC+ABS EP739 51.83J29G001 MYLAR FOR LVPS BOTTOM PD527D 52.80N14G001 LVPS HEAT SINK THERMAL PAD FUJIPOLY GR-b, 73.7mm*32.5mm*1.5mm "GREEN: 61.00022G001 SELF-LOCKING RING (SPN p1.5) 61.83404G001 HEXAGON COPPER STICK M3 L18 SCREW L4.5 EzPro 735 61.86713G001...
Page 76
ASSY LAMP DRIVER MODULE PD527 Exploded Parts List Item Part Number Description 51.00138G001 SPACER SUPPORT SCK-3A "PINGOOD" EP739 51.83J21G001 LAMP DRIVER BRACKET PC+ABS PD527 75.83J01G001 ASSY OSRAM LAMPDRIVER 230W 42.81C02G001 W.A. 5P #28 140mm BALLAST/MAIN BD EP758 76.83F01G001 ASSY LAMP DRIVER(OSRAM)) TO LAMP W.A. HD72 Note: Please refer to RSPL for updated Part Number.
Page 77
ASS DMD BLOWER FAN MODULE PD527 Exploded Parts List Item Part Number Description 61.83J05G001 BLOWER BRACKET SECC 0.8t PD527 85.1A626G050 SCREW PAN MECH M2.6*5 BLACK NYLOK 49.83J04G001 45x10 DMD BLOWER, SUNON B1245PFV1-8A, BLACK COVER , R TYPE Note: Please refer to RSPL for updated Part Number. Chapter 5...
Page 78
ASSY LAMP MODULE PD527 Exploded Parts List Item Part Number Description 23.80S10G011 LAMP COVER GLESS OF DP739 SERIES WITH MAR 23.83J15G001 OSRAM 200W E20.5 LAMP 51.80J02G002 LAMP BOTTOM 739 PPS 52.83F12G001 LAMP RUBBER HD72 52.85902G011 LAMP CONTACT COVER RUBBER 300C 61.00018G002 LOCK SCREW PAN MECH M3*8.5-3.5 BLACK 61.80W16G002...
Page 79
ASSY COLOR WHEEL MODULE PD527 Exploded Parts List Item Part Number Description 80.83K05G001 PCBA PHOTO SENSOR BD PD526 85.1A626G040 SCREW PAN MECH M2.6*4 BLACK NYLOK 23.83J19G021 COLOR WHEEL R90/G88/W110/B72, SLEEVE BEARING OF DP739 SERIES 51.80J38G002 MYLAR CW SUPPORT 739 FRPP 0.125t 52.83615G001 COLOR WHEEL DISC RUBBER, EzPro755 61.80J08G002...
Page 80
ASSY AXIL FAN MODULE PD527 Exploded Parts List Item Part Number Description 52.80W01G001 RUBBER FOR FAN7020 2300MPX 61.80N07G001 FAN BRACKET SECC EP739 52.80N06G001 SPONGE FOR BLOWER DUCT BF1000 t=3.3mm EP739 49.83J01G001 70x20 SYSTEM FAN, SUNON GM1207PKVX-A, R TYPE 41.83J08G001 EMI TAPE W10*H0.55*L94mm PD527 Note: Please refer to RSPL for updated Part Number.
Page 81
PRE ASSY LVPS LITEON PD527 Exploded Parts List Item Part Number Description 42.83J01G002 W.A. 14P 210mm LVPS TO M/B PD527 42.89602G001 W.A. 3P #20 180mm LAMP DRIVER TO LAMP EP759 75.83J04G001 ASSY LITEON LVPS 250W PD527 51.82W01G001 MYLAR FOR LVPS TOP PLATE PD125 Note: Please refer to RSPL for updated Part Number.
Page 82
ASSY BOTTOM COVER MODULE PD527 Exploded Parts List Item Part Number Description 51.83J02G002 BOTTOM COVER PC+ABS PD527 51.83J05G002 RIGHT COVER PC+ABS PD523PD 51.83J06G001 LEFT COVER PC+ABS PD527 52.89601G001 ADJUST FOOT RUBBER EP910 52.80N03G001 RUBBER FOOT RF21-10 EP739 86.03123G035 HEX CAP HEAD NUT M3*0.5P L3.5 51.83J18G001 ELEVATOR BUTTON PC+ABS PD527 61.83J06G002...
Page 83
ASSY BLOWER DUCT MODULE PD527 Exploded Parts List Item Part Number Description 61.83F17G001 BLOWER DUCT AL HD72 52.88510G001 BLOWER DUCT PORON BF-1000 2200MP Note: Please refer to RSPL for updated Part Number. Chapter 5...
Page 84
Description 51.83J01G001 FRONT COVER NORYL PD527 51.83J09G001 FRONT IR LENS PC PD527 35.82Q01G001 ACER LOGO LABEL PD322 80.83K04G001 PCBA IR RECEIVER BD MODULE (FRONT) PD526 52.83J05G001 FRONT COVER SPONGE PD527 Note: Please refer to RSPL for updated Part Number. Chapter 5...
Page 85
ASSY BLOWER FAN MODULE PD527 Exploded Parts List Item Part Number Description 49.83F02G001 SUNON 50*20 LAMP BLOWER H72 52.87306G001 RUBBER BLOWER FAN FRAME 2100MP Note: Please refer to RSPL for updated Part Number. Chapter 5...
Page 86
ASSY SPEAKER MODULE PD527 Exploded Parts List Item Part Number Description 51.80N11G001 SPEAKER HOLDER PC+ABS EP739 49.88604G002 SPEAKER 8ohm 2W X16 PD120 Note: Please refer to RSPL for updated Part Number. Chapter 5...
Page 87
PRE ASSY ENGINE BOTTOM MODULE Exploded Parts List Item Part Number Description 23.80J02G001 REFLECTION MIRROR1 OF DP739 SERIAL '' 51.80J01G001 ENGINE BOTTOM 739 BMC 52.80J05G002 PORON RELAY 739 SILICONE RUBBER 52.80J25G002 PORON CONDENSOR 739 SILICONE RUBBER 61.80J06G001 SPRING MIRROR1 739 SUS301 0.25t Note: Please refer to RSPL for updated Part Number.
Page 88
PRE ASSY ENGINE BASE MODULE PD527 Exploded Parts List Item Part Number Description 85.1A326G060 SCREW PAN HEAD MECH M2.6*6 BLACK 85.1A626G040 SCREW PAN MECH M2.6*4 BLACK NYLOK 23.80J02G011 REFLECTION MIRROR2 OF DP739 SERIAL 23.80S10G001 UV/IR FILTER OF DP739 SERIES 43.83A17G101 THERMAL SWITCH / YS11A125B-023 / WIRE LENGTH 150MM WITH 5MM TOLERANCE 51.81542G001 TAPE 3M J350 17*15mm...
Page 89
ASSY OPTICAL LENS MODULE PD527 Exploded Parts List Item Part Number Description 85.WA321G040 SCREW PAN TAP M1.7*4 BLACK 23.89601G001 YM06 1.2X XGA ZOOM PROJECTION LENS 51.83J08G002 FOCUS RING PC+ABS PD527 Note: Please refer to RSPL for updated Part Number. Chapter 5...
Page 90
ASSY OPTICAL LENS MODULE PD523PD Exploded Parts List Item Part Number Description 85.WA321G040 SCREW PAN TAP M1.7*4 BLACK 23.83F01G001 YM10 PROJECTION ZOOM LENS FOR DP739 SERIES 51.83J08G002 FOCUS RING PC+ABS PD527 Note: Please refer to RSPL for updated Part Number. Chapter 5...
Page 91
ASSY LAMP COVER MODULE PD527 Exploded Parts List Item Part Number Description 51.83J07G002 LAMP COVER NORYL PD527 61.83J07G001 LAMP COVER SPRING SUS301 0.2t PD527 Note: Please refer to RSPL for updated Part Number. Chapter 5...
Page 92
ASSY BACK COVER MODULE PD527D Exploded Parts List Item Part Number Description 51.83J04G001 BACK COVER PC+ABS PD527 35.83J03G001 BACK IO OVERLAY PC PD527D Note: Please refer to RSPL for updated Part Number. Chapter 5...
Page 93
ASSY PCBA MAIN MODULE PD527D Exploded Parts List Item Part Number Description 80.83J01G001 PCBA MAIN BD PD527D 51.83J27G001 PCBA MAIN MYLAR PD527 Note: Please refer to RSPL for updated Part Number. Chapter 5...
Page 94
ASSY PCBA MAIN MODULE PD523PD Exploded Parts List Item Part Number Description 80.83J61G001 PCBA MAIN BD PD523PD 51.83J27G002 PCBA MAIN MYLAR PD527D Note: Please refer to RSPL for updated Part Number. Chapter 5...
Page 95
ASSY EMI SHIELDING PD527 Exploded Parts List Item Part Number Description 61.83J03G002 EMI SHIELDING AL 0.6t PD527 41.83J04G001 EMI TAPE W5*H1.0*L167mm PD527 41.83J06G001 EMI TAPE W5*H1.0*L109mm PD527 41.83J07G001 EMI TAPE W5*H1.0*L11mm PD527 41.83J20G001 EMI GASKET W10*H1.0*L145mm PD527 41.83J21G001 EMI GASKET W10*H1.0*L37mm PD527 52.83J04G001 FAN &...
Page 96
ASSY TOP SHIELDING PD527 Exploded Parts List Item Part Number Description 61.83J01G002 TOP SHIELDING TIN 0.2t PD527 41.83J02G001 EMI GASKET W5*H1.0*L245mm PD527 41.83J01G001 EMI GASKET W5*H1.0*L155mm PD527 Note: Please refer to RSPL for updated Part Number. Chapter 5...
Page 97
ASSY ENGINE EMI THERMAL PLATE MODULE PD527 Exploded Parts List Item Part Number Description 41.83J08G001 EMI TAPE W10*H0.55*L94mm PD527 41.83J13G001 EMI GASKET W5*H7*L150mm PD527 61.83J15G001 ENGINE EMI THERMAL PLATE AL 0.6t PD527 52.83J08G001 ENGINE THERMAL PLATE SPONGE PD527 52.83J10G001 LIGHT CUT SPONGE PD527 Note: Please refer to RSPL for updated Part Number.
Appendix Serial Number Definition System Serial Number System Definition Serial No. (Acer Barcode rule), 22 digits (Barcode Type: Code 128) PPPPPPPPPPWWWSSSSSMMEE The coding rule of the Bar Code: (1) PPPPPPPPPP (10 digitals) : Part Number excluded “dot” Ex: EY.J1401.001. (2) WWW (3 digitals) : Week Code The first digit is the last letter of the year;...
Need help?
Do you have a question about the PD527D and is the answer not in the manual?
Questions and answers