4-5. White Ratio (Balance) Adjustment ................4-35 4-6. Servicing Information ....................4-36 5. Exploded View & Part List ..................5-1 5-1. UN19C4000PD Exploded View ..................5-1 5-2. UN19C4000PD Parts List ....................5-3 5-3. UN22C4000PD Exploded View ..................5-5 5-4. UN22C4000PD Parts List ....................5-7 5-5.
1. Precautions 1. Precautions 1-1. Safety Precautions Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock. 1-1-1. Warnings For continued safety, do not attempt to modify the circuit board. Disconnect the AC power and DC power jack before servicing.
1. Precautions 1-2. Servicing Precautions WARNING: An electrolytic capacitor installed with the wrong polarity might explode. Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions section of this manual. If unforeseen circumstances create conlict between the following servicing precautions and any of the Note: safety precautions, always follow the safety precautions.
1. Precautions 1-4. Installation Precautions For safety reasons, more than a people are required for carrying the product. Keep the power cord away from any heat emitting devices, as a melted covering may cause ire or electric shock. Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal temperature may cause ire.
Page 9
2. Product speciications Model UN22C4000PD Feature Digital-TV, RF, 2-HDMI, 1-Component, 1-A/V, 1-USB2.0, D-SUB ሪ Brightness : 400 cd/m2 ሪ High Contrast Ratio : 40,000:1 ሪ Response Time : 4.5ms ሪ Speciications Description Item LCD Panel 22inch HD 60Hz Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic) Vertical : 47 Hz ~ 63 Hz (Automatic) Display Colors...
Page 10
2. Product speciications Model UN26C4000PD Feature Digital-TV, RF, 2-HDMI, 1-Component, 1-A/V, 1-USB2.0, D-SUB ሪ Brightness : 400 cd/m ሪ High Contrast Ratio : 40,000:1 ሪ Response Time : 4.5ms ሪ Speciications Description Item LCD Panel 26inch HD 60Hz Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic) Vertical : 47 Hz ~ 63 Hz (Automatic) Display Colors...
Page 11
2. Product speciications UN22C4000PX(HD-Ready) Model Feature Digital-TV, RF, 2-HDMI, 1-Component, 1-A/V, 1-USB2.0, D-SUB ሪ Brightness : 400 cd/m2 ሪ High Contrast Ratio : 40,000:1 ሪ Response Time : 4.5ms ሪ Speciications Description Item LCD Panel 22inch HD 60Hz Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic) Vertical : 47 Hz ~ 63 Hz (Automatic) Display Colors...
Page 12
2. Product speciications UN26C4000PX(HD-Ready) Model Feature Digital-TV, RF, 2-HDMI, 1-Component, 1-A/V, 1-USB2.0, D-SUB ሪ Brightness : 400 cd/m ሪ High Contrast Ratio : 40,000:1 ሪ Response Time : 4.5ms ሪ Speciications Description Item LCD Panel 26inch HD 60Hz Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic) Vertical : 47 Hz ~ 63 Hz (Automatic) Display Colors...
Page 13
2. Product speciications CHANNEL FREQUENCY TABLE 1. OUTPUT FREQUENCY : ANALOG fv:45.75MHz, fs:41.25MHz DIGITAL Fc:44MHz 2. TUNING STEP SIZE : FIRST PLL 250KHz SECOND PLL 62.5KHz OSD CH NO CH NO CH NO CH NO Air-DTV Air-NTSC BAND Cable STD BAND Cable HRC Cable IRC 72.
Page 14
2. Product speciications OSD CH NO CH NO CH NO CH NO Air-DTV Air-NTSC BAND Cable STD BAND Cable HRC Cable IRC 499.25 ULTRA 498.00 499.25 505.25 ULTRA 504.00 505.25 511.25 ULTRA 510.00 511.25 517.25 ULTRA 516.00 517.25 523.25 ULTRA 522.00 523.25 529.25...
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
Page 18
2. Product speciications Model UN22C4000PD Feature Digital-TV, RF, 2-HDMI, 1-Component, 1-A/V, 1-USB2.0, D-SUB ሪ Brightness : 400 cd/m2 ሪ High Contrast Ratio : 40,000:1 ሪ Response Time : 4.5ms ሪ Speciications Description Item LCD Panel 22inch HD 60Hz Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic) Vertical : 47 Hz ~ 63 Hz (Automatic) Display Colors...
Page 19
2. Product speciications Model UN26C4000PD Feature Digital-TV, RF, 2-HDMI, 1-Component, 1-A/V, 1-USB2.0, D-SUB ሪ Brightness : 400 cd/m ሪ High Contrast Ratio : 40,000:1 ሪ Response Time : 4.5ms ሪ Speciications Description Item LCD Panel 26inch HD 60Hz Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic) Vertical : 47 Hz ~ 63 Hz (Automatic) Display Colors...
Page 20
2. Product speciications UN22C4000PX(HD-Ready) Model Feature Digital-TV, RF, 2-HDMI, 1-Component, 1-A/V, 1-USB2.0, D-SUB ሪ Brightness : 400 cd/m2 ሪ High Contrast Ratio : 40,000:1 ሪ Response Time : 4.5ms ሪ Speciications Description Item LCD Panel 22inch HD 60Hz Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic) Vertical : 47 Hz ~ 63 Hz (Automatic) Display Colors...
Page 21
2. Product speciications UN26C4000PX(HD-Ready) Model Feature Digital-TV, RF, 2-HDMI, 1-Component, 1-A/V, 1-USB2.0, D-SUB ሪ Brightness : 400 cd/m ሪ High Contrast Ratio : 40,000:1 ሪ Response Time : 4.5ms ሪ Speciications Description Item LCD Panel 26inch HD 60Hz Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic) Vertical : 47 Hz ~ 63 Hz (Automatic) Display Colors...
Page 22
2. Product speciications CHANNEL FREQUENCY TABLE 1. OUTPUT FREQUENCY : ANALOG fv:45.75MHz, fs:41.25MHz DIGITAL Fc:44MHz 2. TUNING STEP SIZE : FIRST PLL 250KHz SECOND PLL 62.5KHz OSD CH NO CH NO CH NO CH NO Air-DTV Air-NTSC BAND Cable STD BAND Cable HRC Cable IRC 72.
Page 23
2. Product speciications OSD CH NO CH NO CH NO CH NO Air-DTV Air-NTSC BAND Cable STD BAND Cable HRC Cable IRC 499.25 ULTRA 498.00 499.25 505.25 ULTRA 504.00 505.25 511.25 ULTRA 510.00 511.25 517.25 ULTRA 516.00 517.25 523.25 ULTRA 522.00 523.25 529.25...
Page 24
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
Page 25
Remote Control & Batteries (AAA x 2) C4000 HD-Ready 22"/26 : BN59-01018A Power Cord 3903-00467 26" : BN63-06542B Cover-Bottom 22"/19" : BN96-10168C Samsung Electronics Service center 26" : BN96-13156A Stand 22"/19" : BN96-10168C Screw 6003-000133 (for the stand - M4, L6) Owner’s Instructions...
3. Disassembly and Reassembly 3. Disassembly and Reassembly This section of the service manual describes the disassembly and reassembly procedures for the UN26C4000PD LCD TV. WARNING: This LCD TV contains electrostatically sensitive devices. Use caution when handling these components. 3-1. Disassembly and Reassembly Cautions: 1.
Page 27
3. Disassembly and Reassembly Description Picture Description Screws 2. 26" C4000 : Remove the 11 screws of rear-cover. 19"/22" C4000 : Remove the 10 screws of rear-cover. : You can take the rear cover off without 6003-000133 removing these screws. 6003-001003 3.
Page 28
3. Disassembly and Reassembly Description Picture Description Screws 6. Remove the 4 screws of main board and 5 screws of IP board. 6001-002283 6001-000321 7. Lift up the panel. ※ Reassembly procedures are in the reverse order of disassembly procedures. Screw Size Code No.
4. Troubleshooting 4. Troubleshooting 4-1. Troubleshooting 4-1-1. Previous check Check the various cable connections irst. • Check to see if any cables are damaged or burnt. • Check to see if there is a disconnected or loose cable connection. • Check to see if the cables are connected according to the connection diagram. Check the power input to the Main Board.
Page 30
4. Troubleshooting 4-1-2. No Power The LEDs on the front panel do not work when connecting the power cord. Symptom The SMPS relay does not work when connecting the power cord. The units appears to be dead. The IP relay or the LEDs on the front panel does not work when connecting the power cord if the cables are improperly connected or the Main Board or SMPS is not functioning.
Page 32
4. Troubleshooting 4-1-3. No Video (Analog PC signal) Symptom Audio is normal but no picture is displayed on the screen. Check the PC source Major Check the Arsenal, Check the Chelsea. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 35
4. Troubleshooting 4-1-4. No video (HDMI1, 2 - Digital signal) Symptom Audio is normal but no picture is displayed on the screen. Check the HDMI source. Major Check the HDMI switch, Check the Chelsea. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 38
4. Troubleshooting 4-1-5. No Video (Tuner_CVBS) Symptom Audio is normal but no picture is displayed on the screen. Check the Tuner CVBS source. Major Check the Tuner, Check the Chelsea. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 41
4. Troubleshooting 4-1-6. No Video (Tuner DTV) Symptom Audio is normal but no picture is displayed on the screen. Check the DTV source. Major Check the Tuner, Check the Chelsea. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 44
4. Troubleshooting 4-1-7. No Video (Video CVBS) Symptom Audio is normal but no picture is displayed on the screen. Check the Video CVBS source Major Check the Chelsea. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 47
4. Troubleshooting 4-1-8. No Video (Component) Symptom Audio is normal but no picture is displayed on the screen. Check the Component source Major Check the chelsea. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 50
4. Troubleshooting 4-1-9. No Sound Symptom Video is normal but there is no sound.. When the speaker connectors are disconnected or damaged. Major When the sound processing part of the Main Board is not functioning. checkpoints Speaker defect.. Check the source and check the connection of sound cable Input the sound source properly.
4. Troubleshooting 4-2. Alignments and Adjustments 4-2-1. General Alignment Instuction Usually, a color LCD-TV needs only slight touch-up adjustment upon installation. Check the basic characteristics such as height, horizontal and vertical sync. Use the speciied test equipment or its equivalent. Correct impedance matching is essential.
4. Troubleshooting 4-3. Factory Mode Adjustments 4-3-1 Entering Factory Mode To enter ‘Service Mode’ Press the remote -control keys in this sequence : - If you do not have Factory remote - control Power OFF MUTE Power On 4-3-2 How to Access Service Mode Using the Customer Remote Turn the power off and set to stand-by mode Press the remote buttons in this order MUTE-1-8-2-POWER ON to turn the set on.
Page 55
4. Troubleshooting 4-3-3 Factory Data Option Factory Reset Option Type NONE/19O6TH0C/19A6TH0C/22I6TH0C/22A6TH0C/22 D6TH0C/22P6TH0C/26A6AH0C/26D6AH0C/26L6AH0C/ 26P6AH0C/32A6AH0C/32D6AH0C/32L6AH0C32P6AH0 C/32A6AF0C/32L6AF0C/32A1AF0C/32L1AF0C/37L6AF0 C/37L1AF0C/40A6AF0C/40D6AF0C/40L6AF0C/40A1AF 0C/40L1AF0C/40A1UF0C/40D1UF0C/40L1UF0C/46A6A F0C/46D6AF0C/46L6AF0C/46A1AF0C/46L1AF0C/46A1 UF0C/46D1UF0C/46L1UF0C/55A1UF0C/55L1UF0C/65L 1UF0C/19R6TH0E/22D6TH0E/26D6AH0E/32D6AH0E32 D6UF0E/32A1UF0E/32D1UF0E/37L6UF0E/37D1UF0E/3 7L1UF0E/40D6UF0E/40A1UF0E/40D1UF0E/46D6UF0E/ 46L6UF0E/46A1UF0E/46D1UF0E/46L1UF0E/55A1UF0E /55D1UF0E/55L1UF0E/65L1UF0E/42HHcD3/50HHcD45 0FArN4/50FArV458FArN1/58FArV163FArN1/ Local Set … LC350/LC450/LC450H/LC451LC452/LC457HLC459H/ LC480/LC530/LC530H/LC539H/LC540/LC550/LC560/ LC580/LC570/LC610/LC620/LC630/LC631/LC632/LC633/ LC640/LC650/LC652/LC653/LC654/LC670/ UC4000/UC400H/UC4010/UC5000/UC5100/UC6000/ UC6200/UC6300/UC6400/UC6400H/UC6500/UC6510/ Model UC4000 UC6530/UC6540/UC6550/UC6600/UC6620/UC6630/ UC6700/UC6720/UC6730/UC6740/UC6800/UC6830/ UC6900/UC6900H/UC8000/ PC420/PC430/PC431/PC432/PC450/PC451/PC480/ PC520/PC530/PC531/PC540/PC541/PC550/PC551/ PC560/PC580/PC590/PC670/PC6100/PC6400/PC6500/ PC7000/PC7700/PC8000...
Page 57
4. Troubleshooting Hotel Mode ON/OFF Hotel Option SI Vender Samsung "Samsung/2M/Locatel/VDA/VDA-S/Acentic/ Premiere/Sustinere/Quadriga/ETV/Ibahn/ Magilink/Otrum/PeninsulaSiemens/OCC/MTI/ MstreamsDAWNXTV/Enseo/Cardinal/Guestek/OFF/ Movielink/Swisscom" Power On Channel 1~135 Channel Type ATV/DTV/CATV/CDTV Power On Volume 0~100 Min Volume 0~100 Max Volume 0~100 Unlock Unlock/Lock/OnlyPower Panel Button Lock Power On Source...
Page 58
4. Troubleshooting Test Pattern Panel Display Time 23Hr ixed Tuner Status OFF/ White/Grey/Black/Red/Green/Blue Test Pattern Pattern Sel RFC PC Mode ixed … ixed Logic Pattern Sel … ixed Logic Level Sel … ixed TUNER STATUS ixed ixed Singal Strength Bandwidth ixed Frequency...
4. Troubleshooting 4-4. White Balance - Calibration 4-4-1 White Balance -Calibration AV Calibration 1. Calibration Comp Calibration PC Calibration HDMI Calibration 4-4-2 White Balance - Adjustment (low light) (hight light) Sub Bright Sub Contrast 3. W/B R offset R gain G offset G gain B offset...
4. Troubleshooting 4-5. White Ratio (Balance) Adjustment You can adjust the white ratio in factory mode (1:Calibration, 3:White-Balance). Since the adjustment value and the data value vary depending on the input source, you have to adjust these in CVBS, Component 1 and HDMI 1 modes. The optimal values for each mode are conigured by default.
Software is represented as ‘Year/Month/Day_Version’. Note Installing the latest version is recommended. : Insert a USB drive containing the irmware upgrade ile downloaded from samsung.com into the TV. Please ሪ By USB be careful not to disconnect the power or remove the USB drive until upgrades is complete. The TV will turn off and on automatically after completing the irmware upgrade.
6. Wiring Diagram 6-3. Connector Functions Connector Functions CN201 IP CNM802 Supply main power and dimming signal from IP board to Main Board. CN1303_26/CN1304_19 T-CON The LVDS signal transfered from Main Board to Panel. 6-4. Cables LEAD (Main-IP 18P) LVDS (Main - TCON) 26"...
Need help?
Do you have a question about the UN19C4000PD and is the answer not in the manual?
Questions and answers