Advertisement
Quick Links
Floormat Kit
TimeCutter
Model No. 147-8765
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
No parts required
Floormat
Plastic plug
Preparing the Machine
Gas Models Only
1.
Park the machine on a level surface.
2.
Disengage the blade-control switch.
3.
Move the motion-control levers outward to the
-
position.
NEUTRAL
LOCK
4.
Shut off the engine and remove the key.
5.
Wait for all moving parts to stop.
6.
Allow machine components to cool.
© 2023—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Riding Mower
Qty.
–
Prepare the machine.
1
Install the floormat.
8
Electric Models Only
Register at www.Toro.com.
Use
1.
Park the machine on a level surface.
2.
Disengage the blade-control switch.
3.
Move the motion-control levers outward to the
position.
NEUTRAL
4.
Engage the parking brake.
5.
Shut off the machine and remove the key.
6.
Wait for all moving parts to stop.
7.
Allow machine components to cool.
8.
Remove the battery packs from the machine.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Form No. 3465-775 Rev A
Installation Instructions
*3465-775*
Advertisement
Related Manuals for Toro 147-8765
Summary of Contents for Toro 147-8765
- Page 1 Form No. 3465-775 Rev A Floormat Kit TimeCutter ® Riding Mower Model No. 147-8765 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Qty. – No parts required Prepare the machine.
- Page 2 Installing the Floormat Secure the floormat to the platform using the plastic plugs. g467787 Figure 1 g467788 Figure 2...
Need help?
Do you have a question about the 147-8765 and is the answer not in the manual?
Questions and answers